• Korean Journal of Poultry Science
• /
• v.30 no.2
• /
• pp.135-143
• /
• 2003

This study was conducted to investigate feeding effects of the high pressure boiled extract(HPBE) of the Ogol chicken on weight gain and serum lipid composition of rat. Rats(S.D,♂) were fed with normal feed(T$_1$), normal feed ＋ herb HPBE(T$_2$), normal feed ＋ Ogol chicken HPBE(T$_3$), normal feed ＋ mixture of cross­bred Ogol chicken HPBE hydrolyzed with Flavourzyme 0.1% for 35 days. During experimental period, the effects of the treatments on growth performance, plasma triglyceride(TG) and cholesterol were determined. The effects of feeding HPBE on growth performance and serum triglyceride levels in rat. After a 6 day treatment, body weights were 39.96g, 44.56g, 43.34g, and 45.99g for T$_1$, T$_2$, T$_3$ and T$_4$ groups respectively. The growth rates of T$_2$ and T$_4$ groups were significantly(P<0.05) higher than T$_1$ group, but the differences were not observed after 18 days of feeding period. Triglyceride contents were 62.89${\pm}$6.24mg/dl, 55.70${\pm}$6.76mg/dl, 43.60${\pm}$4.68mg/dl and 45.00${\pm}$3.75mg/dl for T$_1$, T$_2$, T$_3$ and T$_4$ groups respectively, where T$_1$ group was significantly (P<0.05) higher than T$_3$ and T$_4$ groups. In serum total cholesterol contents, there was no significant difference among the groups. GOT(glutamic oxaloacetic transaminase) and GPT(glutamic pyruvic transaminase) also showed similar levels among the treatments.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.81-85
• /
• 2005

Pressure sensitive adhesive (PSA) was prepared by semi-batch emulsion polymerization of acryl monomers in the presence of reactive and non-reactive carboxylated polyurethane resin (PUR). Effects of the PUR type, its content, and crosslinker feeding method on the adhesive properties of the PSA was investigated. In this experiment, the PSA prepared with the reactive PUR showed better adhesive property then the PSA with the non-reactive PUR. Especially, peel strength of the PSA, where acetoacetoxy ethyl methacrylate and 1,6-hexane diamine as crosslinkers were introduced, was dramatically enhanced in severe humidity condition due to the interfacial crosslinking.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.437-443
• /
• 2018

This study investigates the effect of the mixing elements on the pressure loss and mixing performance in line mixer. The high density ozone water devices mixed with gas and liquid are used in various fields such as sterilizing of group feeding facilities and water quality management at a fish farm. Due to the decrease in rainfall due to climate change, pasteurization of drinking water from ground water and surface water is extremely important. Therefore, it is intended to develop a line-mixed gas liquid mixer with a small amount of space. In this study, the effects of the number of static mixers and the types and the number of the orifice used in line mixer on the volume fraction and the pressure loss were studied by CFD simulation. The pressure drops of line mixer with orifice which curved vanes were attached to were down to more than 50 percent of that of line mixer with static mixer whereas the mixing performance of the former was similar to that of the latter.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.10
• /
• pp.887-894
• /
• 2016

The CNG pressure vessel is manufactured by a deep drawing and ironing (D.D.I) process for forming cylinder parts, followed by a spinning process for formation of the dome part. However, studies on the buckling phenomenon of the dome part and formation of the inlet part have not been performed yet, and the CNG pressure vessel is produced by the experience of the field engineers and the trial and error method. In this study, buckling phenomenon during the spinning process was predicted by comparing critical buckling loads obtained through theoretical analysis with axial loads from the FEA, and a method for preventing buckling of the dome part was proposed by employing commercial software (Forge NxT 1.0.2). Also, to form the inlet part, forming loads of the roller at contact point between the roller and the dome part were analyzed according to radii of the dome part, and the inlet part was formed by controlling the radius of the dome part.

• Journal of the Korean Institute of Gas
• /
• v.5 no.2 s.14
• /
• pp.22-29
• /
• 2001

The number of gas containers and the period of exchanging gas containers are vsy important in designing liquefied petroleum gas(LPG) supply system for small capacity domain. And also the evaluation of remaining LPG in containers to be exchanged is very useful information in commerce. However seldon has been studied on calculating method about those with respect to gas consumption pattern. In this study, a simulation method was developed to estimate the evaporation capacity of LPG container, the mass gas flow rate from LPG container, the temperature and vapor pressure of LPG, and the remained LPG at containers to be exchange by using LPG property equations, mass balance equation, and heat balance equation. The simulation results were correlated well with experimental data. The overall heat transfer coefficient from air to LPG is approximately $9{\~}13 kcal/m^2{\cdot}hr{\cdot}^{\circ}C$ and does not strongly affect on the evaporation capacity of LPG container. The mass gas flow rate from LPG container is constant when the vapor pressure of LPG is within pressure regulator's control range. While, out of range, it suddenly reduce to a evaporation rate which is balanced with heat transfer from air. The evaporation capacity of LPG container increased with surrounding temperature and the composition of propane, and decreased drastically with continuous gas consumption. The number of gas containers divided the number of houses using gas supply system was reduced by using automatic gas feeding device.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.2
• /
• pp.106-113
• /
• 1987

The Alaska pollack longline operations, which consist of baiting, shooting, hauling and arrangement of hooks, are dependant on manual labour up to the present. The automation against this traditional way is necessary to eliminate the manual operations and to reduce crew. We have developed a prototype longline system suitable for Alaska pollack longline gear, which is composed of an automatic baiting machine, an automatic line hauler, a hook cleaner and storage rails. The automatic bailing machine driven by hydraulic power is precise baiting method controlled sequentially, and the automatic line hauler is to haul up the mainline by means of hydraulic power and at the same time to split every hook and to carry it onto storage rail automatically. A series functioning tests on shooting and hauling apparatus were carried out in the laboratory and at sea. The results obtained are as follows ; 1. As for the baiting machine, the exciting time of solenoid which operates a directional valve, bait feeding and cutting time, is shortened according to the increase of pressure, and also, after cutting the bait, the over-rotated angle of the blade increased in accordance with the increase of pressure. 2. The baiting efficiency is about $90\%$ when using sand lance (Hypoptychus dybowskii), and the most proper pressure of the hydraulic circuit in feeding and cutting the bait is between $13\;kgf/cm^2\;and\;20\;kgf/cm^2$. 3. The hook splitting rate of the automatic line hauler is about $95.5\%$ regardless of hauling speed and materials of snood. 4. The case of unseparating hook is appeared when the snood gets entangled or the hook is sticked in the mainline.

• Journal of Nutrition and Health
• /
• v.55 no.1
• /
• pp.141-154
• /
• 2022

Purpose: This study determined the relationships between maternal comprehensive feeding practices (CFP) and dietary practices of preschool children. Methods: Participants of the study were 227 mothers of children aged 3 to 5 years attending daycare centers and kindergartens in Seoul and Gyeonggi Province of Korea. The Comprehensive Feeding Practices Questionnaire was used to assess the maternal feeding practices. The Nutrition Quotient for Preschoolers (NQ-P) was measured to evaluate dietary practice and diet quality of children. Results: The balance of NQ-P for children was positively correlated with the modeling, restrictions for weight control, encouragement of balance and variety, pressure, and involvement among maternal CFP. Moderation of NQ-P was positively correlated with monitoring, modeling, teaching about nutrition, encouragement of balance and variety, environment, and involvement among maternal CFP. However, it was negatively correlated with emotion regulation, food as a reward, and child control in maternal CFP. Among maternal CFP, the environment of NQ-P was positively correlated with monitoring, modeling, teaching about nutrition, encouragement of balance and variety, environment, and involvement, and it was negatively correlated with emotion regulation. As a multiple regression analysis, maternal CFP that positively predicted balance of NQ-P indices were restricted for weight control, pressure, and involvement. Among maternal CFP, encouragement of balance and variety, and environment were positive predictors, while food as a reward, and child control were negative predictors for the moderation of NQ-P. Items of maternal CFP positively predicting environmental factors of NQ-P were monitoring and environment. Conclusion: Mothers are recommended to practice dietary guidance to their children, such as monitoring, modeling, teaching about nutritional information, recommendation of balance and diversity, healthy eating environment, and participation in meal plan and preparation, while they are advised not to conduct any adverse dietary guidance such as emotional control, compensation with food, child control, and food coercion.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.83-86
• /
• 2006

In this study, the syngas producing facility that consists of pulverized coal feeding/gasification and hot gas clean-up system was tested for Indonesian subbituminous coal. And the DME conversion facilities have been developed and tested for converting syngas to DME by reactions with catalysts. So, the entrained-bed slagging type pi lot scale coal gasifier was operated normally in the temperature range of $1,400{\sim}1,450^{\circ}C,\;7{\sim}8kg/cm^2$ pressure. And Roto middle coal produced syngas that has a composition of $36{\sim}38%$ CO, $14{\sim}16%\;H_2,\;and\;5{\sim}8%\;CO_2$. Particulates in syngas were 99.8% removed by metal filters. $H_2S$ composition in syngas was also desulfurized by the Fe chelate system to yield less than 0.1 ppm level. When the clean syngas $70{\sim}100 Nm^3/h$ was provided to DME conversion rector, normally operated in the temperature range of $230{\sim}250^{\circ}C$ and $60kg/cm^2$ pressure, 4.5% DME was yielded.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.6
• /
• pp.31-38
• /
• 2013

A pulse driven atmospheric plasma jet controlled by external ballast capacitor is developed. Unlike the most commonly use DBD sources, the proposed device utilizes bare metal electrode. The discharge energy per pulse can precisely be determined by changing voltage and capacitance of the ballast capacitor. It is shown that the device can provide wide range of plasma, from stable glow mode to near arc state. Current-voltage waveforms, optical emission spectra and discharge images are investigated as a function of an injection energy. The OES shows that He and oxygen lines are increased as a function of the external ballast capacitor. Ozone and rotational temperature have similar tendency with a power consumption. The feeding gas is He and the applied DC voltage is from 400V to 800V when the gap distance is $500{\mu}m$.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.3
• /
• pp.80-89
• /
• 1998

Propulsion subsystem transfers KOMPSAT into mission orbit and controls its attitude. Design factor consists of structure safety, electrical circuit design, consumable power estimation of thermal hardwares, damping device design of fuel transient pressure, and system configuration design by considering plume effect from thruster firing. System level analysis should be performed for verification of system design under launch vehicle and orbital environment. Electrical functional test of thermal control hardware, proof pressure test, cleanliness verification test, and internal/external leakage test of fuel feeding system should be carried out for performance estimation of propulsion system. Design and assembly process of propulsion subsystem was depicted and reliability of system was verified by test analysis in this paper.