• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.26-33
• /
• 2000

• Journal of Biosystems Engineering
• /
• 제28권3호
• /
• pp.209-216
• /
• 2003

Red pepper calyx cutting devices using a impacting force by a rotational cutter were devised and tested to obtain the fundamental data for development of a calyx removal unit. Fresh red peppers with 80∼87%(w.b.) of initial moisture contents were used as experimental materials. Square and wire type of rotational cutters were used to cut the red pepper calyx and the fresh red peppers were fed into the device both manually and automatically. Three rotational speeds of 250, 500, 700rpm were selected for a square, and 1000, 1500, 1800rpm for a wire type cutter respectively. Four types of red pepper fixing unit were used in manual feeding. The cutting rate of the square type cutter was over 50% regardless the shape and specification of the cutter. For the wire type cutter, the copper wire and nylon chord could not be applied to cut the red pepper calyx because of the low cutting rate. But for the fine wire, the cutting rate was higher and the cutting mechanism was more steady than copper wire and nylon chord. The cutting rate of automatic feeding and wire type cutting unit was about 70% for all levels of the rotational speed. The cutting rate was highly related to the impacting point of red pepper in carrier box. To increase the cutting rate using the rotational cutter, a proper device and mechanism was required to keep the impacting point consistently.

• Journal of Biosystems Engineering
• /
• 제23권3호
• /
• pp.259-270
• /
• 1998

An automatic seedling transplanter, employed an innovative plug-seedling feeder was developed by improving the problems of conversational feeding and transplanting mechanisms. With conventional methods, missing and damage rates of seedling were high for long seedlings over 20cm and also breaking seed-bed was frequently observed. Thus, a pushout-bucket slide-hopper type trandsplanter was devised and tested. Test results of picking and transferring accuracies of the developed transplanter are as follows : A prototype transplanter performed with 1.5% of missing rate. The deviations of horizontal feed ranged from -0.3mm to 2.8mm and averaged 0.673mm for the 128-hoe test tray : and ranged from -lmm to ＋3mm and averaged 0.785mm for the 200-hole test tray. The deviations could decrease with precise manufacturing and lightening the mechanism. The maximum and deviations of vertical feed were -2.3mm and + 1mm, respectively, for the 128-hole test tray ; and were ＋3mm and ＋2.5mm, respectively, for the 200-hole test tray. The missing rate, seeding bruise rate and seed-bed damage rate were esitmate to be 1.3％, 0.4% and 3.5％, respectively, with the developed automatic transplanter.

• Ocean Science Journal
• /
• 제43권1호
• /
• pp.61-65
• /
• 2008

Feeding apparatus, mechanism and passage of ingested prey were described for Nemopilema nomurai (Scyphozoa: Rhizostomeae). N. nomurai medusae without central mouths have developed complicated canal systems connecting the tip of the tentacle and oral arm to the gut cavity. The number of junctions in the canal system increases with the bell diameter. The prey is gathered by paralyzing nematocyst at the tentacles and by adhering cirri at the oral arms and scapulets. They are engulfed into the terminal pore located at the oral arms and scapulets, and entered into the gut cavity via the canal system. The estimated digestion time is 1 hour and 20 min. The diameter of terminal pore is always about 1 mm, implying that they could not eat prey larger than that pore size. On the other hand, ephyrae have central mouths and could swallow prey as large as adults could. Exploitation of the same size of food by adult and ephyra implies that N. nomurai can affect seriously the whole food web, massively ingesting micro- and mesozooplankton and cutting the energy transfer toward the higher level of carnivores.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1381-1387
• /
• 2007

현재까지 다양한 연속적인 공정시스템은 섬유, 제지 및 인쇄 등 많은 산업응용 분야에서 사용되고 있다. 이러한 응용분야에서 공정처리를 받고 있는 제품에 가해지는 장력은 원료의 공급속도와 생산되는 제품의 방출 속도간의 속도차에 의해 변화될 수 있다 특히, 섬유공정에서 공급속도와 방출 속도간의 속도차나 관성효과에 의해 발생되는 장력변동은 제품의 품질을 저하시킬 수 있다. 따라서 섬유공정에서 이러한 요인들에 의해 발생되는 장력 변동을 적절한 방법에 의해 보상하는 것은 매우 중요한 문제이다. 본 논문에서는 이러한 문제를 해결하기 위하여 섬유공정에서 많이 사용되고 있는 환편기 시스템에서의 장력제어 문제를 다루고자 한다. 먼저 일반적인 연속공정의 권취 메커니즘에 대한 장력 관계식을 모델링한다. 다음은 환편기 시스템에서 풀림롤과 감김롤을 효율적으로 구동하기 위하여 풀림롤과 감김롤간의 속도차와 관성특성을 고려한 새로운 장력제어 방법을 제시한다. 다양한 실험을 통하여 제안된 장력제어 방법이 주어진 환편기 시스템의 공정구간에서의 장력제어 성능을 향상시킬 수 있음을 보인다.

• 대한의생명과학회지
• /
• 제11권2호
• /
• pp.89-101
• /
• 2005

Obesity is increasing worldwide and has become a major health burden in Western societies affecting every third American and every fifth European. Obesity makes a major contribution to morbidity and mortality, predisposing individuals to cardiovascular disease and diabetes. Many new substances are currently being investigated for their usefulness in the pharmacotherapy of obesity. Most anti-obesity drugs can be divided into four groups: those that reduce food intake; those that alter metabolism; those that increase thermogenesis; and those that regulate hormone involved in feeding behavior. In this article we review these and other agents available in various countries for the treatment of obesity. Perhaps more importantly, we have focussed on areas of potential productivity in the future. Over the last 5 or so years, this impetus in obesity research has provided us with exciting new drugs targets involved in the regulation of feeding behavior and cellular mechanism involved in energy expenditure. Recent development in the quest for control of human obesity include the discovery of hormones, neuropeptides, receptors and transcription factors involved in feeding behavior, metabolic rate and adipocyte development. For developing new, perhaps even more specific pharmacological agents, further research is needed to understand the individual different genetic and physiological basis of obesity. It remains the hope of research scientists that in the not too distant future we shall see a new class of anti-obesity drugs arising logically from the molecular biology revolutions.

• 한국식품영양과학회지
• /
• 제23권3호
• /
• pp.396-401
• /
• 1994

The effect of vitamin B12 status and pectin feeding on vitamin B12 absorption in rats were studied. Rats in low, medium, and high vitamin B12 status were fed either fiber-free or 10% pectin diet and absorption of a single oral dose of vitamin B12 status of rats was verified by urinary methylmalonic acid and liver vitamin B12 measurements. Absorption of vitamin B12 tended to increase as the rats became deficient in vitamin B12 , although the difference was not significant . Pectin inhibited absorption of vitamin B12 regardless of the vitamin B12 status of the rats. The results demonstrated that inhibition of vitamin B12 absorption by pectin would be a possible mechanism for the impairment of vitamin B12 status due to chronic pectin feeding.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.99-104
• /
• 2004

Micro/meso cutting is getting more important in the fields of precision machining technology. A micro-turning lathe is one of parts to consist the Micro Factory. It accepts stepwise motion actuators that are used for feeding system instead of the conventional mechanism. It is consisted of two Piezoelectric ceramics; one is for feeding the slider, and the other is for clamping the slider in the guide way of the body. The linearity and positional accuracy of the actuators are good enough for high precision motion. The spindle unit is operated with DC motor on the top of the slider. The motion is communicated with miniaturized linear encoder attached on each side of axis. A mono crystal diamond tool is used for cutting tool. This micro-lathe has been made a machining experiment to see the characteristics of micro-machining.

• 한국환경과학회지
• /
• 제5권3호
• /
• pp.387-398
• /
• 1996

Granular sludge formation and it's activity change are the most important factors in achieving successful start-up and operation of UASB reactor. Nevertheless, the detailed mechanism is still unknown. On the basic of the experiments in laboratory-scale UASB reactor, the effect of hydrogen partial pressure on sludge granulation was evaluated. Size distribution method and specific metabolic activity of the sludge with the operation time were used as a means for estimating the degree of the sludge granulation. At the constant hydrogen loading, the granulation increased as starvation periods in hydrogen supply increased, resulting in high organic removal efficiency. It was evidient that hydrogen play very important role in granulation and sludge granulation was achieved through mutual symbiosis between hydrogen utilizing bacteria and hydrogen producing bacteria under the hydrogen dificient conditions. Key words : granular sludge, UASB reactor, hydrogen partial pressure.

• 한국어정보학회:학술대회논문집
• /
• 한국어정보학회 2016년도 제28회 한글및한국어정보처리학술대회
• /
• pp.20-24
• /
• 2016

Sequence-to-sequence 모델은 입력열을 길이가 다른 출력열로 변환하는 모델로, 단일 신경망 구조만을 사용하는 End-to-end 방식의 모델이다. 본 논문에서는 Sequence-to-sequence 모델을 한국어 구구조 구문 분석에 적용한다. 이를 위해 구구조 구문 트리를 괄호와 구문 태그 및 어절로 이루어진 출력열의 형태로 만들고 어절들을 단일 기호 'XX'로 치환하여 출력 단어 사전의 수를 줄였다. 그리고 최근 기계번역의 성능을 높이기 위해 연구된 Attention mechanism과 Input-feeding을 적용하였다. 실험 결과, 세종말뭉치의 구구조 구문 분석 데이터에 대해 기존의 연구보다 높은 F1 89.03%의 성능을 보였다.