• 한국생산제조학회지
• /
• 제20권6호
• /
• pp.685-691
• /
• 2011

The Bearing preload units are used for stable rotational movements of high speed spindles. The feeding mechanism of the preload unit is important to prevent overheat of bearings and to keep constant bearing load under thermal deformation of spindle unit. In this study, ball slide guide and ball bush as feeding mechanism of preload unit are selected. The maximum static friction force, radial stiffness and damping ratio of ball slide guide with ball load, ball number and ball size are widely investigated. In conclusion, the surface of ball slide guide must be heat treated to reduce static friction force. The number and size of ball are increased to control sensitive bearing preload force.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.596-599
• /
• 2004

The media transport systems, such as printers, copiers, facsimile, ATMs, cameras, etc., have been widely used and being developed rapidly. In the development of those systems, the media feeding mechanism is an important key technology for the design and development of the media transport systems. In this paper, a multi-degree of freedom sheet model with dynamic contact conditions is presented to understand the mechanism of sticking and jamming. A sheet is modelled as a cantilever beam and the feeding velocity is assumed to be constant. The relation between the feeding velocity and the coefficient of friction for guaranteeing stable feeding is presented. Simulations are performed for a horizontal linear guide and a oblique linear guide, calculating the contact force and contact states of mass points.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.261-264
• /
• 1997

A single action press robot, which consists of a driving unit, rotator, up-down feed base and feed bar, is developed and applied for the press automation. The driving unit is made up with a face cam and blade cam, which have a phase angle. The feeding system consists of a double speed-up apparatus and linear motion guides, and has a fast motion characteristics. A horizontal feeding speed of the feed bar is increased twice by the double speed-up apparatus. The driving mechanism could be simplified due to the speed-up of the feeding unit.

• 반도체디스플레이기술학회지
• /
• 제2권2호
• /
• pp.21-24
• /
• 2003

Seam seal welding on the semiconductor package is a process for sealing the packages of semi-conductors, crystal parts, saw filters and oscillators with lid plate by seam welding. This paper presents the development process of automatic seam seal welding system. In this process, the process algorithm, high precision welding current control, design of welding head, high speed and high precision feeding mechanism and user interface process control program technologies are included.

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.502-508
• /
• 2011

In this paper, we proposed vertical feeding mechanism for a slide parts feeder using the slide type method. This parts feeder of the slide type method have been proposed to suppress the dust generation from the feeding objects. The proposed parts feeder mechanism is composed with the casing hopper, the vertical feeding unit, the in-line feeder and linear shooter unit. And, these mechanisms did modularity through optimum design by means of mechanical and dynamical analysis using the RecurDyn(multi-body dynamics) analysis module. Also were carried out the virtual prototype using the 3-D CAD program. And it had been manufactured as the prototype of the slide parts feeder. The field test for validation of performance was performed directly at the inspection line of bolt and screw. In the field test, this slide parts feeder showed an efficiency of about 1.2 times the bowl feeder. It also showed an epoch reduction in the dust generation compared to the vibration bowl feeder. So this slide parts feeder will be applied useful in the vision inspection system for a screw and bolt.

• Journal of Nutrition and Health
• /
• 제7권2호
• /
• pp.37-51
• /
• 1974

This Study was carried out to observe the effect of nutritional condition on the change of protein metabolism in the animal body by feeding on imbalanced protein diet. A total 242 growing male albino rats, weighing $115{\sim}120$ gm, were used for the experimental animals. The rats were fed on the standard diet(st), protein flee diet(pf) and imbalanced protein diet(ib) for twelve weeks respectively. Hemoglobin, packed cell volume in blood, and total nitrogen, amino acid nitrogen, urea-nitrogen, creatinine, transaminases(GPT, GOT) in liver and serum, and total nitrogen in small intestine, and total nitrogen, urea-nitrogen In small intestine, and total nitrogen, urea-nitrogen, creatinine, urea-nitrogen/creatinine ratio in urine were measured. The results obtained are as follows; 1. The gained body weight were lower in pf group and ib group than those of st group. The gained body weight fed for 12 weeks, were 80% lower in pf group than those of st group, and the body weight of pf group for $50{\sim}75$ days feeding were $40{\sim}60%$ decreased, compared with the stating weight, and then all of them died. 2. The change of the brain, liver, kidney, spleen and small intestine by feeding on imbalanced diet for 12 weeks were no remarkable difference with the starting weight, but those of protein free diet group were half or more decrease and those were significantly lower in spleen and small intestine especially than the other organ 3. The contents of hemoglobin in pf group for 8 weeks feeding, and the packed cell volume in pf group for 8 weeks feeding and in ib group for 12 weeks feeding were decreased. but those of the other feeding group were almost same value. 4. The total nitrogen in the liver, small intestine and serum of each diet group were no remarkable difference respectively. The contents of amino acid nitrogen in pf group for 2 and 6 weeks feeding were increased. 5. On transaminases: a) The cycle of increase and decrease of GPT activities were come periodically and the interval of cycle were fast in the early stage of feeding and slow there-after. b) The GPT activities were decreased gradually in pf group after feeding and those were increased in ib group for 6 weeks feeding but decreased there-after. The frequency of cycle were more GPT than GOT and specially those of GPT in early stage of feeding were two or three times while GOT was one. c) The interval of increase and decrease in GOT and amino acid nitrogen cycle were similar tendency. 6. The contents of total nitrogen, creatinine and urea-nitrogen of pf group in urine were decreased very sharply from sharting feeding to one week but increased dully from six weeks to eight weeks feeding. The contents of urea-nitrogen of ib group were increased dully by feeding on ten weeks but decreased by feeding on twelve weeks. From the above results, it is concluded that the trend of the metabolic change is maintained equally by homeostatic mechanism using the endogenous protein source during a certain period by imbalanced protein diet feeding. The homeostatic mechanism is come peridically, very fast in early stage of feeing and than slow there-after.

• 한국주조공학회지
• /
• 제43권6호
• /
• pp.294-301
• /
• 2023

The effects of Cu on feeding and macro-porosity characteristics were investigated in hypo- (A356 and 319) and hypereutectic (391) aluminum-silicon alloys. T-section and Tatur tests showed that the feeding and macro-porosity characteristics were significantly different between the hypo- and hypereutectic alloys. The hole and the pipe in the T-section and the Tatur casting in hypereutectic alloy showed a rough and irregular shape due to the faceted growth of the primary silicon, while the results of the hypoeutectic alloys exhibited a rather smooth surface. However, the addition of Cu did not strongly affect the macro-feeding behavior. It is known that copper segregates and interferes the feeding process in the last stage of solidification, possibly leading to form more amount of micro shrinkage porosity by the addition of Cu. The macro porosity formation mechanism and feeding properties were discussed upon T-section and Tatur tests together with an alloying addition.

• 재활치료과학
• /
• 제9권1호
• /
• pp.79-90
• /
• 2020

목적 : 본 연구의 목적은 경직형 뇌성마비 아동들의 조음과 관련이 있는 변인들 중에서 연령, 운동기능 정도 및 섭식기능과 조음능력 간 변인에 대해 연구하는데 있다. 연구 방법 : 본 연구는 서울, 경기, 대구, 대전 및 부산 등에 거주하면서 재활의학과 전문의에 의해서 경직형 뇌성마비로 진단을 받은 2세 2개월~7세 8개월(평균 4세 7개월) 범위의 남아 34명과 여아 27명을 대상으로 하였다. 이때 조음능력인 구어 명료도, 교호운동 속도 및 교호운동 명료도를 종속변인으로 하고, 연령, 운동기능 정도 및 섭식 재질과 방법에 따른 구어 및 비구어 기제 기능을 독립변인으로 하여 중다회귀분석 실시하였다. 연구 결과 : 본 연구의 결과 경직형 뇌성마비 아동들의 조음능력 중 구어 명료도는 섭식 방법 측면에서 컵으로 먹기와 숟가락으로 먹기 동안의 비구어 기제 기능에서 유의하였다. 교호운동 속도는 운동기능 정도와 섭식 재질 측면에서 죽으로 먹기 동안의 구어 기제 기능과 섭식 방법 측면에서 컵으로 먹기 동안의 비구어 기제 기능이 유의한 결과를 보였다. 또한, 교호운동 명료도는 섭식 재질 측면에서 죽으로 먹기 동안의 구어 기제 기능과 섭식 방법 측면에서 컵으로 먹기 동안의 비구어 기제 기능에서 유의한 결과를 나타내었다. 결론 : 본 연구 결과, 경직형 뇌성마비 아동들의 조음능력 관련 변인 중 섭식기능에 따른 구어 및 비구어 기제 기능과 운동기능 정도를 고려한 섭식기능 평가와 치료가 유용할 것으로 여겨진다. 또한, 후속 연구로 뇌성마비 아동에게 적합한 섭식기능 증진 프로그램을 개발하고 적용한 후의 조음능력 개선에 대한 연구가 이루어진다면 매우 유용할 것이라고 사료된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.569-572
• /
• 2005

In many machines handling lightweight and flexible media, such as automated teller machines(ATM) and printers etc., the media must transit an open space. In the paper feeding mechanism, it is important to feed the sheet without jamming under any conditions. To avoid sheet jamming, first we need to predict the behavior of the sheet exactly. The nonlinear theory of the dynamic elastica has often been used to a nonlinear dynamic deflection model. In this paper, the governing equation is derived and simulated by the finite difference method. The analysis has to include aerodynamic effect for more exact behavior analysis. For verification of the numerical simulation, the experiments were performed using high-speed camera and feeding mechanism. The experimental results show good agreement with the numerical simulations.

• 한국기계연구소 소보
• /
• 통권18호
• /
• pp.99-104
• /
• 1988

The method of simulation for ballistic feeding mechanical system is presented. Taking photograph of roller drived by a force of explosion, searches the motion of roller. The algorithm that a motion of roller is converted into a motion of cam is presented. Using central difference method, the angular velocity and acceleration of cam is evaluated.