• 제목/요약/키워드: feeding loop

검색결과 53건 처리시간 0.024초

칼라 비데오 프린터의 Paper Feeding 제어 시스템 설계

  • 신용후
    • 전자공학회지
    • /
    • 제18권6호
    • /
    • pp.39-46
    • /
    • 1991
  • 칼라 비데오 프린터의 paper feeding 제어 시스템을 DC motor를 이용하여 설계하였다. 목표 spec을 만족하기 위한 H/W를 구성한 후 digital control 이론을 적용하여 loop gain K를 찾고 위상계와 속도계 gain을 결정하는 방법을 설명하였다. 한편 DC analysis를 통하여 앞에서 결정된 gain으로 설계할 경우 parameter variation에 의해 동작점이 벗어나는 것을 확인하고 system 구성 및 gain 등을 조정하여 동작점의 안정화를 가져올 수 있었다. 또한 DC analysis를 함으로써 부품의 공차를 설계할 수 있었다.

  • PDF

Methanol induction strategy using the two-loop control-based DO-stat and its application to repeated induction in methylotrophic yeast Pichia pastoris

  • 최승진;임형권;우성환;정경환
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2001년도 추계학술발표대회
    • /
    • pp.333-335
    • /
    • 2001
  • A simple control strategy of DO-stat was introduced to the recombinant rGuamerin production process in Pichia pastoris. This induction strategy consisted of two interrelated control loops ‘by which oxygen ratio of inlet gas and methanol feeding rate was controlled. Using this control strategy, over-feeding or under-feeding of methanol could be avoided in concomitance with the efficient control of dissolved oxygen level. As a result, the cell concentration reached 130 g/L and rGuamerin expression level was 450 iu/L, which was more than 40% increased result comparing with the fed-batch process using manual control of methanol feeding rate.

  • PDF

엔드론치형 구형도파관 어댑터 내부의 루프결합구조에 대한 모드 해석 (Modal Analysis of Loop Coupling Structure in End Launcher Rectangular Waveguide Adapter)

  • 김동현;좌정우;양두영
    • 대한전자공학회논문지TC
    • /
    • 제45권2호
    • /
    • pp.119-126
    • /
    • 2008
  • 본 논문에서는 엔드론치형 구형도파관 어댑터 해석을 위하여 루프 결합 모델을 제안하고, 이를 토대로 입력 임피던스의 모드 해석식을 유도하였다. 구형도파관 내의 전파모드와 고차모드들에 따른 입력 임피던스의 영향을 분석하고, 설계변수에 대하여 고찰하였다. 또한 선행 연구에서 제안된 방식과 상용 해석 툴인 HFSS의 해석결과를 바탕으로 제안한 해석식이 타당함을 검증하였다. 제안한 엔드론치형 구형도파관 어댑터는 특성 임피던스 $50{\Omega}$을 갖는 동축선의 내부도체와 WR90 상용도파관내에서 길이가 17.6mm인 급전루프가 연결된 결합구조이다. 이러한 구조에서 앤드론치형 어댑터는 정재파비(VSWR)가 2.0이하인 기준에서 7.5GHz에서 10.6GHz 대역을 갖는다.

Early Postoperative Retrograde Jejunojejunal Intussusception after Total Gastrectomy with Roux-en-Y Esophagojejunostomy: A Case Report

  • Lee, Se-Youl;Lee, Jong-Chan;Yang, Doo-Hyun
    • Journal of Gastric Cancer
    • /
    • 제13권4호
    • /
    • pp.263-265
    • /
    • 2013
  • Intussusception is a rare cause of postoperative intestinal obstruction in adults. Many retrograde intussusceptions occur during the period following gastrectomy. A 77-year-old woman visited our hospital because of detected gastric adenocarcinoma. She received radical total gastrectomy with Roux-en-Y esophagojejunostomy. On the fifth postoperative day, she complained of abdominal pain, and we found leakage at the esophagojejunostomy site and dilatation of the Roux limb and the afferent limb of the jejunojejunostomy. Emergency surgery was performed. Retrograde jejunojejunal intussusception accompanied with a nasojejunal feeding tube was found at the efferent loop of the jejunojejunostomy. No ischemic change was found; therefore, manual reduction and primary repair of esophagojejunostomy was performed. She was discharged without complications on the 23rd re-postoperativeday. We suggest that the nasojejunal feeding tube acted as a trigger of intussusception because there was no definitive small bowel mass or postoperative adhesion. We present our findings here along with a brief review of the literature.

AT 급전계통 해석 알고리즘 연구 (A Study Algorithm of AT Feeding Systems)

  • 추동욱;김재철
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제51권4호
    • /
    • pp.174-179
    • /
    • 2002
  • In this paper, the modified simulation algorithms of the Auto Transformer (AT) feeding electric train system were proposed. To obtain terminal voltage of train by using equivalent circuit or the AT feeding system, the iterative method is proposed for which determine the train voltages. The train voltages are iteratively calculated from the system voltage drop and line impedance. In the carte study, the proposed method is verified from actual operation data of the Kwa-Chon line. Also it is verified that the proposed method can be extent to the multi-train simulation tool. The terminal voltage of the multi-train can be calculated by using superposition principle and it is easily applied to the proposed method. Therefore, the proposed method can be a solution for the complexity of the circuit analysis in the existing methods.

A High-Isolation MIMO Antenna with Dual-Port Structure for 5G Mobile Phones

  • Yang, Hyung-kyu;Lee, Won-Woo;Rhee, Byung-Ho
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권4호
    • /
    • pp.1458-1470
    • /
    • 2018
  • In this letter, a new dual-port Multiple-Input Multiple-Output (MIMO) antenna is introduced which has two independent signal feeding ports in a single antenna element to achieve smaller antenna volumes for the 5G mobile applications. The dual-port structure is implemented by adding a cross coupled semi-loop (CCSL) antenna as the secondary radiator to the ground short of inverted-F antenna (IFA). It is found that the port to port isolation is not deteriorated when an IFA and CCSL is combined to form a dual-port structure. The isolation property of the proposed antenna is compared with a polarization diversity based dual-port antenna proposed in the literature [9]. The operating frequency range is 3.3-4.0 GHz which is suitable for places where $4{\times}4$ MIMO systems are supposed to be deployed such as in China, EU, Korea and Japan at the band ${\times}$ (3.3 - 3.8GHz. The measured 6-dB impedance bandwidths of the proposed antennas are larger than 700 MHz with isolation between the feeding ports higher than 18 dB [1-2]. The simulation and measurement results show that the proposed antenna concept is a very promising alternative for 5G mobile applications.

STATCOM을 이용한 교류 전기철도 급전시스템의 전압강하 보상 (Compensate Voltage Drop for Autotransformer-Fed AC Electric Railroad System with Single-Phase STATCOM)

  • 정현수;이승혁;김진오
    • 조명전기설비학회논문지
    • /
    • 제16권5호
    • /
    • pp.53-60
    • /
    • 2002
  • 본 논문에서는 정전류 부하모델 교류 전기철도 AT 급전시스템을 회로망 해석법(Loop Equation Method)을 이용하여 실제 급전시스템과 유사하게 제약조건을 두고 여러 경우를 가정하여 모델링 하였다. 이 방법을 통해 앞으로 건설될 고속 전기철도 급전시스템의 전력품질에 영향을 줄 수 있는 전압강하에 주안점을 두고 정상급전의 경우뿐만 아니라 연장급전의 경우를 새롭게 확대 해석하였으며 이 결과를 동적 시뮬레이션 프로그램인 PSCAD /EMTDC를 이용하여 그 정확성과 실용성을 검증하였다. 또한 사례연구를 통해 전압 보상기를 설치하지 않는 경우와 STATCOM을 설치한 경우의 전압강하 보상효과를 PSCAD/EMTDC로 시뮬레이션 하여 검증하였다.

근거리 전송에 적합한 가이딩 코일의 파라미터 (Parameters of a guiding coil for wireless power transfer)

  • 우대웅;김재희;이동현;박경호;박위상
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.345-346
    • /
    • 2008
  • We analyzed the structural parameters of a guiding coil and a feeding loop for wireless power transfer in mid-range. The length, diameter, and number of turns of the guiding coil are the major factors to determine the resonant frequency. The separation distance between the coil and the loop also affects the power transfer ratio. This scheme has a greater transmission efficiency than using dipoles.

  • PDF

대부하 전기유압시스템의 부하압력 피이드백에 관한 연구 (The use of load pressure feedback in designing the high performance electro-hydraulic speed controller for large inertia system)

  • 김영대;이대옥;심재운
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
    • /
    • pp.358-363
    • /
    • 1987
  • It is widely noted that pressure feedback systems have been devised to damp the fluid resonance effectively in precision speed control-for large inertia system. A compensation technique preserving the natural output disturbance discrimination characteristics at lower frequencies is proposed The load pressure across positive displacement acceleration. The technique involves feeding back load differential pressure, sensed by pressure transducers, though a simple analog compensatory circuit (high pass filter). The effectiveness of the damping is determined by the filter time donstant and loop gain. Nonlinear total hydraulic simulation results verify the possibility of linear model predictions of extending the closed loop bandwidth beyond the uncompensated frequency.

  • PDF

Circular Polarization Dielectric Resonator Antenna Excited by Single Loop Feed

  • Jeon, Sin-Hyung;Choi, Hyeng-Cheul;Kim, Hyeong-Dong
    • ETRI Journal
    • /
    • 제31권1호
    • /
    • pp.74-76
    • /
    • 2009
  • A new feeding method for the circular polarization (CP) dielectric resonator antenna (DRA) is proposed in this letter. Two orthogonal modes (${TE^x}_{{\delta}11}$, ${TE^y}_{1{\delta}1$) of the rectangular DRA are excited by a $90^{\circ}$ phase difference of the differential and common modes currents of the proposed feeding structure. To demonstrate the good CP performance of the proposed method, a right-hand CP DRA for a global positioning system was designed. The impedance bandwidth of the proposed antenna for $S_{11}$ < -10 dB and 3 dB axial ratio bandwidth are about 5.4% and 1.95% at 1.57 GHz, respectively.

  • PDF