• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.379-387
• /
• 2015

A custom power device provides an integrated solution to the present problems that are faced by the utilities and power distribution. In this paper, a new controller is designed which is connected to a multiconverter unified power quality conditioner (MC-UPQC) for improving the power quality issues adopted modified synchronous reference frame (MSRF) theory with Fuzzy logic control (FLC) technique. This newly designed controller is connected to a source in order to compensate voltage and current in two feeders. The expanded concept of UPQC is multi converter-UPQC; this system has a two-series voltage source inverter and one shunt voltage source inverter connected back to back. This configuration will helps mitigate any type of voltage / current fluctuations and power factor correction in power distribution network to improve power quality issues. In the proposed system the power can be conveyed from one feeder to another in order to mitigate the voltage sag, swell, interruption and transient response of the system. The control strategies of multi converter- UPQC are designed based on the modified synchronous reference frame theory with fuzzy logic controller. The fast dynamics response of dc link capacitor is achieved with the help of Fuzzy logic controller. Different types of fault conditions are taken and simulated for the analysis and the results are compared with the conventional method. The relevant simulation and compensation performance analysis of the proposed multi converter-UPQC with fuzzy logic controller is performed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.583-591
• /
• 2011

We presents the architecture of the 2.5 Gbps hybrid PON link which can increase of the transmission distance and link capability, and split ratio by using a colorless DWDM-PON and O/E/O based reach extender into an existing G-PON link. A RSOA based DWDM-PON to apply the feeder fiber can provide a link capacity of 32 larger that of a legacy G-PON. The reach extender converts the wavelength of DWDM-PON to G-PON through GTC frame regeneration at the remote node, and can provide a burst reset signal in order to extract upstream burst signal, simultaneously. The proposed hybrid PON enable a legacy G-PON to operate over the maximum 60 km distance with a 128-way split per WDM wavelength.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.95-100
• /
• 2021

If we know the location of the hull block and the welding feeder in the shipyard, we can easily obtain the location information of the worker. That data is very useful for implementing a workplace safety monitoring system. However, it is difficult to apply a fixed communication network to the workplace due to the specificity of the hull structure and welding process. In this study, inductive power line communication, which can replace dedicated communication line, was reviewed. A ferrite core was used as an inductive coupler to be installed on the power cable of the welding machine, and a nano-crystalline core was applied as a coupler to be fastened to the support rod of the metal block. In order to visualize the operating principle of the proposed couplers, 3D modeling and finite element analysis were performed with the COMSOL AC/DC module. In the communication performance test using an aluminum profile, when the communication channel was formed by the contact of the welding electrode, the bandwidth was kept above 6 Mbps.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.4
• /
• pp.556-561
• /
• 2022

In this paper, we present a block media communication (BMC) system which employs powerline communication to the equipments used in the welding process for ship-assembly and uses metal block as a communication medium. Inductive couplers are installed on digital feeder and pin jig. Information signal is added to the current generated by the welding gun, and applied to the block. When the welding operation starts, information generated in the field is transmitted to the monitoring server in real-time. The field test on the BMC system confirms that the transmitted data are correctly received at the server. Since the proposed system can be built without any changes to the existing welding process, it is helpful to increase competitiveness of the shipbuilding industry through smart factory of shipyards. It is also possible to quickly respond to emergency situations that may occur to workers in an electromagnetic wave shielding environment or a closed space, the effect of preventing industrial accidents will be great.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.471-481
• /
• 2006

This paper aims to provide strategies to attract container cargoes for the Incheon port by analysing O/D of the container cargoes with the year-2004 export and import data from. The Korean customs service. O/D analysis was carried out with establishing optimal zones, which are defined as City, Gun, Gu(Korean administrative districts) to which the export-import service can be provided from a certain port with minimized freight(or transport) cost and stevedoring fee. For the Incheon port, 35 administrative districts including Seoul and Incheon in Kyunggi-Do and Kangwon-Do are recognized as the optimal zones, and approximately 25.50% of around 2.02-million-TEU per year of the cargoes from the zones are exported and imported through the port. The strategies to attract container cargoes was suggested by comparing the Incheon port to supposed-competitive ports. The Busan port(64.89%), Guangyang port(4.46%) and Pyeongtaeck port(3.35%) are supposed as the competitive ports which have a large proportion of handling the cargoes from the optimal zones. When comparing the Incheon port to these ports. The Incheon port requires a distinctive cost strategy, providing incentives to attract shipping companies and cargoes, improving efficiency related to loading-unloading at the port, and reinforcing Feeder-Network and advertisements about cost-saving to the shippers(the owners of goods) in the national capital region Consequently, the mentioned requirements are suggested as the strategies to attract cargoes for the Incheon port.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.227-235
• /
• 2008

This study analyzed the efficiency of a trunk with branches and a trunk with feeders route system comparing the user cost and operator cost of those route systems. Basically, a trunk with branches is more efficient than a trunk with feeders in the passengers' perspective if the transit system of a trunk and feeders are the same. In the case that the trunk system is hierarchically higher than the feeder system, a trunk with feeders has the competitive edge over a trunk with branches if the saving of travel cost induced by using the trunk line is larger than the increasing waiting and transfer cost. This result is consistent with the previous research by Park et al.(2007c), which analyzed the efficiency of hierarchical structure in a grid transit network. If the travel demand of each origins and destinations is low, increasing headway according to the travel demand can increase passenger load or operating efficiency in a trunk with feeders route system. In this case, a trunk with feeders route system is more prevalent as the operating cost, route length, and number of destinations increases, while it is less prevalent as the transfer cost and passengers' time value of the waiting time increases. In cases that central business district, which is located in the middle of a trunk line, generates travel demand, a trunk with feeders is more efficient than a trunk with branches with the increasing travel demand from and to the CBD. Therefore it can be concluded that to have a dual operating system between CBD and suburban is more efficient than one type transit system. The efficiency of that system can be increased through an efficient transfer system that can reduce the transfer cost.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.73-83
• /
• 2017

Used small household appliances have a wide variety of product types and component materials, and contain high percentage of black plastics. However, they are not being recycled efficiently as conventional sensors such as near-infrared ray (NIR), etc. are not able to detect black plastic by types. In the present study, an automatic sorting system was developed based on laser-induced breakdown spectroscopy (LIBS) to promote the recycling of waste plastics. The system we developed mainly consists of sample feeder, automatic position recognition system, LIBS device, separator and control unit. By applying laser pulse on the target sample, characteristic spectral data can be obtained and analyzed by using CCD detectors. The obtained data was then treated by using a classifier, which was developed based on artificial intelligent algorithm. The separation tests on waste plastics also were carried out by using a lab-scale automatic sorting system and the test results will be discussed. The classification rate of the radial basis neural network (RBFNNs) classifier developed in this study was about > 97%. The recognition rate of the black plastic by types with the automatic sorting system was more than 94.0% and the sorting efficiency was more than 80.0%. Automatic sorting system based on LIBS technology is in its infant stage and it has a high potential for utilization in and outside Korea due to its excellent economic efficiency.

• Journal of Korea Port Economic Association
• /
• v.27 no.2
• /
• pp.313-331
• /
• 2011

Due to have been more keen in East-North Asia Hub Port competition, to be accelerated Busan New Port development, and to result to supply excess position, Busan port has been confronted by many problems. Also, as facilities of North Port is old, it is impossible to secure 16m depth of water at North Port, and North Port redevelopment is being, container traffic of North Port is accelerated to shift at New Port. Therefore, it. is time to seek for connection growth plan of succeeding together-Busan North & New Port as soon as possible. Connection growth plan of succeeding together-Busan North & New Port is focused, as follows. First, it is required to set up model for connection growth plan of succeeding together-Busan North & New Port. It is valid to specialize for ULCC, to promote to global port at New Port, and it is effective to focus on feeder service and general cargo handling, and to include most space to North Port redevelopment. Second, through port function reorganization, it is required to create a synergy by port function clustering. Third, through effective connection traffic network expansion for moving T/S cargo effectively, it is required to develop Busan Port for T/S cargo-focused port. Fourth, it is required to develop port hinterland logistics zone for creating container traffic through connection development of New Port-BJFEZ. Finally, it is required to build SCM system for creating container traffic among shipper, carrier, freight forwarder and related institution.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.289-299
• /
• 2006

This paper aims to provide strategies to attract container cargoes for the Incheon port by analysing O/D of the container cargoes with the year-2004 export and import data from. The Korean customs service. O/D analysis was carried out with establishing optimal zones, which are defined as City, Gun, Gu(Korean administrative districts) to which the export-import service can be provided from a certain port with minimized freight(or transport) cost and stevedoring fee. For the Incheon port, 35 administrative districts including Seoul and Incheon in Kyunggi-Do and Kangwon-Do are recognized as the optimal zones, and approximately 25.50% of around 2.02-million-TEU per year of the cargoes from the woes are exported and imported through the pan. The strategies to attract container cargoes was suggested by comparing the Incheon port to supposed-competitive pons. The Busan portn(64.89%), Guangyang port(4.46%) and Pyeongtaeck port(3.35%) are supposed as the competitive pons which have a large proportion of handling the cargoes from the optimal zones. When comparing the Incheon port to these ports, The Incheon pan requires a distinctive cost strategy, providing incentives to attract shipping companies and cargoes, improving efficiency related to loading-unloading at the port, and reinforcing Feeder-Network and advertisements about cost-saving to the shippers(the owners of goods) in the national capital region. Consequently, the mentioned requirements are suggested as the strategies to attract cargoes for the Incheon port.

• Journal of Korea Port Economic Association
• /
• v.30 no.1
• /
• pp.175-194
• /
• 2014

Because the thawing of the Arctic ocean is slowly accelerating due to global warming, recently exploring resources in Arctic ocean and transporting resources by using the North Pole route have been getting spotlight. Since the original route transported by the Suez Canal from Korea to Europe could be shorten about 8,000km in distance(decreased about 38% compared to the original route), which means shortening about 10 voyage dates, it is expected to bring huge logistics cost reduction. Once the North Pole route is commercialized successfully, it would be one of the most important variables that affects future of Busan port and guides for economic development of Busan. Therefore, the purpose of this study is to analyze Busan port and the economic growth of Busan area by researching promising industry, based on the effect of freight transporting by the Northern sea route on the economy of Busan. For this study, questionnaire surveys and interviews were conducted for 64 people of experts in the shipping and port industry, relevant government, and academics. The survey finding shows that port logistics industry is a promising business in Busan in terms of its growth and competitiveness. It is necessary to develop feeder network facilities that prepare for commercialization of the Northern sea route as a short and medium term plan and provide professional manpower training in polar regions. Ship supply business would also play an important role. It is identified that revitalization of shipbuilding and ocean plant industry should be done in terms of Arctic business. With regard to the fishery industry it is found that modernization of fishery ship and development of fishery equipment used in polar areas should be carried out.