• 전기의세계
• /
• 제30권2호
• /
• pp.86-96
• /
• 1981

The problem of incomplet state feedback began to appear late in60's and early in 70's. This was motivated by inability to measure all the states of the system in practice. This survey paper traces the early developments in the subject through to the most recent achievement of gain-determining, pole-assignment, stabilization, and low sensitivity system design with output feedback.

• 한국전자파학회논문지
• /
• 제11권8호
• /
• pp.1407-1413
• /
• 2000

본 논문에서는 기지국용 전력 증폭기의 혼 변조 성분들을 극도로 억압하기 위해서 Error feedback 방식을 사용한 Feedforward 선형 전력 증폭기를 설계하였다. 특히, 제안된 선형 전력 증폭기는 기존의 피드백 기술의 단점인 증폭 이득의 손실을 없앤 Error feedback 기술과 Feedforward 기술을 혼합하여 적용하였다. 제안된 선형 전력 증폭기는 HP사의 EEsof ADS ver.1.3을 사용해서 설계.제작하였다. 측정결과, 이득 28 ㏈, P1㏈ 31 ㏈m인 주 전력 증폭기에 -7 ㏈m/tone을 갖는 1850 MHz와 1851.25 MHz의 2-tone 신호를 인가한 결과 전체 IMD가 약 35 ㏈ 개선되었다.

• 한국통신학회논문지
• /
• 제17권1호
• /
• pp.68-79
• /
• 1992

고속 아날로그 시스템,위성통신시스템, video signal processing 및 processing 및 optical fiber interface 회로등에서 높은 전자이동도로 인하여 고주파 툭성이 우수한 GaAs 연산 증폭기는 필수적인 구성 요소이다. 하지만, 낮은 전달컨덕턱스 및 low frequency dispersion등의 현상 때문에 높은 전압이득을 얻을 수 없다는 단점을 가지고 있다. 따라서 본 논문에서는 GaAs MESFETfmf 이용한 증폭기의 이득을 증가시키기 위한 기법을 비교분석하고 기존의 전류미러와 새로운 구성의 전류 미러를 설계하여 회로의 안정화를 꾀하였다. 높은 차동전압이득을 얻기 위하여 단일 증폭기의 bootstrap 이득증가기법을 이용하여 차종입력 회로를 구성하였으며, 회로의 안정도 및 우수한 주파수 특성을 얻기 위하여 common mode feedback을 사용하였다. Pspice를 통한 시뮬레이션 결과 설계된 회로의 이득이 18.6dB 향상되었고 안정도 및 주파수 특성면에서 우수함을 확인할 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.321-326
• /
• 1993

A gain scheduling approach for the suspension control of a nonlinear MAGLEV System is presented. We show that this technique is ver useful for improving not only performance to the operational disturbances originating aerodynamic force but also robustness to the uncertainty of payload. As a scheduling variable, even though the external disturbance need to be estimated in real time, but the additive measurement is not required to do it. Some simulations show that the gain scheduling control system performs very well comparing with other method using a nonlinear feedback linearization or a fixed gain linear feedback.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.2020-2021
• /
• 2004

Distributed optical feedback by gain coupling in V-groove quantum-wire lasers is investigated using InGaAs/AlGaAs active materials grown by metalorganic chemical vapor deposition (MOCVD). In order to avoid grating overgrowth during the fabrication of DFB structures, a newly developed constant MOCVD growth method is employed. Gain anisotropy in emission spectra near Bragg wavelength, resulting from optical feedback along the DFB direction, is clearly observed at room temperature.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.431-438
• /
• 2004

This study is on control-gain estimation of energy dissipation control algorithms. Velocity feedback, bang-bang, and energy dissipation control algorithms are proposed based on the Lyapunov stability theory and their performances are evaluated and compared. Saturation problem is considered in the design of the velocity feedback and energy dissipation control algorithms, and chattering problem in bang-bang control is solved by using boundary layer. Numerical results show that the proposed control algorithms can dissipate the structural energy induced by wind loads efficiently, and thus provide good control performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.235-239
• /
• 1989

This paper investigated the effect of right half plane zero on the transient response in the buck-boost DC-DC converter. And it is clarified that the damping ratio decreases gradually by increases of the feedback loop gain and the regulation system of the converter becomes unstable. From the result, we obtained the stability region about the duty ratio and the output current by evaluating the feedback loop gain.

• 전기학회논문지P
• /
• 제51권2호
• /
• pp.94-98
• /
• 2002

QFT(Quantitative Feedback Theory) is a very practical design technique that emphasizes the use of feedback for achieving the desired system performance tolerances in despite of plant uncertainty and disturbance. The gain-phase loop shaping procedure of QFT is employed to design controller, until the bounds at desired frequencies are satisfied. This paper presents a transfer function synthesis using TLS(Total Least Squares) and offers a loop shaping method with the suggested technique. An example illustrates a feasibility of the presented algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.1140-1145
• /
• 1989

A general dynamic iterative learning control scheme is proposed for a class of nonlinear systems. Relying on stabilizing high-gain feedback loop, it is possible to show the existence of Cauchy sequence of feedforward control input error with iteration numbers, which results in a uniform convergance of system state trajectory to the desired one.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1167-1170
• /
• 1999

We consider a negative unity feedback control system in which a controller and a given minimum phase transfer function are in cascade. This paper present a sufficient condition for the existence of a constant gain controller under which the overall closed loop characteristic polynomial is stable. This sufficient condition is based on Lehnigk's lemmas.