• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.1
• /
• pp.84-89
• /
• 2011

A Xenon Feed System (XFS) has been developed for hall-effect thruster to small satellite space-propulsion system applications. The XFS delivers low pressure gas to the Anode and Cathode of thruster head unit from a xenon storage tank. Accurate throttling of the propellant mass flow rate is independently required for each channel of the thruster head unit. The mass flow rate to each channel is controlled using the accumulator tank pressure regulation through a micron orifice and isolation valve. This paper discusses the Xenon Feed System design including the component selections, performance estimation and functional test.

• Journal of the Korean Society for Heat Treatment
• /
• v.6 no.1
• /
• pp.1-8
• /
• 1993

In this paper, the surface roughness influenced by Sm45C hardness in high frequency induction hardening and mechanical characteristics for the changed Hv 598 part and the unchanged hardness Hv 223 part by use of cermet and ceramic cutting tools was experimentally examined. Finally, we could be had some important results by processing surface roughness on cutting conditions such as cutting speed, feed rate, depth of cut and changes of tool nose radius. The results are summarized as follows. 1. In case of the same cutting condition, the hardness of workpiece was high and acquired the best processing surface roughness when the radius of the tool nose had 0.8 mm and feed rate was 0.04 mm/rev. 2. In case of the hardness of workpiece, though the cutting speed didn't have an effect on processing surface roughness, the less feed rate and the more processing surface roughness improved. On the other hand, the low inside the hardness of workpiece, the more cutting speed and the more feed rate increase, the processing surface of roughness improved. 3. Regardless of the hardness of workpiece, the change of the cutting depth didn't have great effect on the surface roughness. 4. On cutting the high surface hardness part with cutting tools of cermet and ceramic, it can be acquired the higher processing surface roughness because it hadn't been taken effect on cutting speed, In case of the cutting process of the low inside hardness part the two cutting tools have acquired the similar processing surface roughness.

• Korean Journal of Poultry Science
• /
• v.26 no.4
• /
• pp.237-245
• /
• 1999

This study was conducted to investigate the effect of dietary thyroid hormone (T$_3$and T$_4$) on growth, feed conversion ratio and serum T$_3$or T$_4$concentration of broiler chicks. Zero to six week-old broiler chicks were randomly allocated into seven treatment groups for feeding trials with three replication : control, T$_3$(0.1), T$_3$(1.0), T$_3$(5.0), T$_4$(0.1), T$_4$(1.0), T$_4$(5.0) ppm group. Concentrations of T$_3$and T$_4$in serum were analyzed. The weight gain of T$_3$(1.0), T$_3$(5.0) and T$_4$(5.0) groups were significantly lower than that of control. No statistically significant adverse effect was observed in other groups (p〉0.05). Feed intake was significantly lower in T$_3$(0.1, 1.0 and 5.0) and T$_4$(5.0) than in control group (p〈0.05), and the feed conversion ratio had a similar trend to the feed intake change. The contents of liquid and abdominal fat pad in carcass were significantly decreased in all T$_3$and T$_4$groups (p〈0.05). T$_3$and T$_4$concentration in serum was significantly increased at over 1.0ppm of the hormone supplementation level. As T$_3$addition level increased, T$_4$concentration in serum reduced ; however, T$_3$in serum was directly proportional during fasted were slightly increased when T$_3$or T$_4$was added to broiler diets.

• Animal Bioscience
• /
• v.34 no.5
• /
• pp.855-866
• /
• 2021

Objective: Performance and physiological responses of dairy calves may change by using extruded soybean meal (ESBM) instead of common soybean meal (SBM) in starter feed. The aims of the current study were i) to determine the effect of extrusion processing of SBM on protein electrophoretic size, fourier transform infrared spectroscopy (FTIR) structures and Cornell Net Carbohydrate and Protein System (CNCPS) protein subfractions and ii) to determine the effect of substitution of SBM with ESBM in starter feed of Holstein heifer calves during pre and post-weaning on performance, nutrient digestibility, and blood metabolites. Methods: The SBM was substituted with ESBM at the level of 0%, 25%, 50%, 75%, and 100% (dry matter [DM] basis). Fifty heifer calves (initial body weight 40.3±0.63 kg) were used for the study. After birth, animals were fed colostrum for 3 days and then they were fed whole milk until weaning. Animals had free access to starter feed and water during the study. Results: Extrusion of SBM decreased electrophoretic protein size and increased rapidly degradable true protein fraction, changed FTIR protein and amide II region. With increasing level of ESBM in the diet, starter intake increased quadratically during the pre-weaning period (p<0.05) and body weight, DM intake and average daily gain increased linearly during the post-weaning and the whole study period (p<0.05). Tbe DM and crude protein digestibilities at week 14 and blood glucose and beta hydroxybutyric acid increased linearly in calves as the level of ESBM increased in the diet (p<0.05). Conclusion: Dairy calves performance and physiological responses were sensitive to SBM protein characteristics including electrophoretic size, FTIR structures and CNCPS protein fractions.

• Animal Bioscience
• /
• v.35 no.12
• /
• pp.1881-1891
• /
• 2022

Objective: The present study aimed to quantify the effects of fermented soybean meal (FSBM) on broiler chickens' performance by employing a meta-analysis approach. Methods: A total of 16 studies were included in the database after being systematically selected using a PRISMA protocol. Hedges' g effect size was used to quantify pooled standardized mean difference (SMD) using random-effects models at 95% confidence intervals (95% CI). Publication bias among studies was computed with Egger's test and visualized using funnel plots. Results: Results indicated that dietary FSBM inclusion increased final body weight (BW) (SMD = 0.586, 95% CI: 0.221 to 0.951, p = 0.002) of broiler chickens, particularly in starter period (SMD = 0.691, 95% CL: 0.149 to 1.233, p = 0.013) while in the finisher period, the effect was weaker (SMD = 0.509, 95% CI: 0.015 to 1.004, p = 0.043). Average daily gain (ADG), feed intake (FI), and feed conversion ratio (FCR) were not affected with FSBM inclusion when compared to control. Subgroup analysis revealed that FI increased in starter period (SMD = 0.582, 95% CI: 0.037 to 1.128, p = 0.036). When considering types of microorganism as moderating variables in the subgroup analysis, we found that Aspergillus oryzae, mixed probiotics+bromelain protease, Bacillus subtilis, and Lactobacillus bacteria significantly increased ADG and FI (p<0.01). Additionally, either Bacillus subtilis+protease or Bacillus subtilis alone decreased FCR (p<0.001). However, meta-regression analysis showed that levels of FSBM inclusion had no effects on final BW (p = 0.502), ADG (p = 0.588), FI (p = 0.861), and FCR (p = 0.462). Conclusion: Substituting SBM in broiler chickens' diet with FSBM improved BW of broiler chickens, especially in the starter period whereas the effects on ADG, FI, and FCR were mostly dependent on microbial strains used for fermentation.

• Journal of Biomedical Engineering Research
• /
• v.44 no.2
• /
• pp.109-117
• /
• 2023

In this study, the effect of the shape of the specimen and the feedrate of the dental ultrasonic surgical instrument on the cutting force and surface roughness of the specimen is analyzed. Experimental specimens were made of SAWBONES artificial bone materials in square and spherical specimens. In addition, the cutting feedrate of the surgical instrument was controlled through the developed moving system. The cutting force generated when cutting the specimen was measured through a force sensor. After the experiment, the cutting surface of the specimen was observed through a three-dimensional optical microscope and the surface roughness was measured. Through one-way ANOVA, the effect of each specimen shape and feed rate on surface roughness was analyzed. As a result of the experiment, the cutting force increased proportionally in the initial feed rate increase stage, but the increase in cutting force decreased as the feed rate continued to increase. Also, the cutting force showed a difference according to the shape of the specimen. The spherical specimen with a relatively small cutting surface area had less cutting force than the square specimen. However, as a result of one-way ANOVA, it was found that the specimen shape and feed rate did not affect the surface roughness. In future studies, it is expected to be used for comparative analysis of ultrasonic surgical instruments and correlation analysis between cutting factors.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.75-79
• /
• 2005

There were three trials involved in this experiment. All piglets in Trial 1 were randomly distributed into the following 4 treatments. Treatment 1. Corn-soybean diet with 5% SDPP. The tryptophan level was 0.237%. Treatment 2. Corn-soybean diet with 10% meat and bone meal. The tryptophan level was 0.177%. Treatment 3. Treatment 1+0.0662% synthetic tryptophan. The total tryptophan level was 0.303. Treatment 4. Treatment 2+0.0662% synthetic tryptophan. The total tryptophan level was 0.236. Piglets in Trial 2 were distributed randomly into the following 4 treatments. Treatment 1: corn-soybean diet+10% meat and bone meal. The total tryptophan level was 0.176%. Treatment 2: corn-soybean diet+10% meat and bone meal+5% SDPP. The total tryptophan level was 0.180%. Treatment 3: Treatment 1 diet+0.004% synthetic tryptophan. The total tryptophan level was 0.180%. Treatment 4: Treatment 1 diet+0.631% synthetic tryptophan. The total tryptophan level was 0.237%. There were 4 treatments in Trial 3. Treatment 1: cornsoybean diet+10% meat and bone meal. The total tryptophan level was 0.176%. Treatment 2: Treatment 1 diet+0.061% synthetic tryptophan. The total tryptophan level was 0.237%. Treatment 3: Treatment 2 diet+0.061% synthetic tryptophan. The total tryptophan level was 0.298%. Treatment 4: corn-soybean diet+10% meat and bone meal+5% SDPP. The total tryptophan level was 0.180%. The results of Trial 1 showed that the piglets ate significantly more (p<0.05) when feed included SDPP in the diet during the first 2 weeks. The feed intake also increased when synthetic tryptophan was added in the 5% meat and bone meal diet; however, the difference did not reach a significant level (p>0.05) during the first 2 weeks. Three weeks onwards the feed intake of 5% meat and bone meal treatment was significantly lower (p<0.05) than for the other three treatments. The results of Trial 2 showed that the feed intake could be significantly improved only when the total tryptophan level reached 0.237%. Piglets in the 5% SDPP treatment had higher feed intake than piglets in 10% meat and bone meal treatment with 0.180% of tryptophan, but did not reach a significant level (p<0.05). Body weight gain also had the same trend as feed intake. The pigs in Treatment 1, the lowest total level of tryptophan treatment (0.176%), had lowest feed intake and weight gain, but the difference did not reach a significant level (p>0.05). The pigs in Treatment 1 of Trial 3 had the lowest feed intake and weight gain (p>0.05). Treatment 2 (0.237%) had the highest average feed intake from Week 1 to Week 5; the second best result was recorded in Treatment 4. As for the weight gain of the piglets in Treatment 4 (5% SDPP), they had a higher average weight during the first 3 weeks. The feed efficiency was better for Treatment 4 (5% SDPP) during the first 2 weeks. The results of these trials showed that both SDPP and tryptophan had a trend to improve the feed intake and weight gain.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.10
• /
• pp.1445-1450
• /
• 2005

This experiment was conducted to evaluate the effect of feed withdrawal (F) and heat acclimatization (A) on malebroiler and -layer chickens responses to acute heat stress (AHS) at four weeks of age. Totals of ninety male chicks of broiler or layer type were randomly allocated into 30 pens of grower batteries with raised wire floors. Chicks were subjected to F and A three times a week through the first three weeks of age. At each time, feed withdrawal and heat acclimatization (T = $35^{\circ}C$) lasted for six and four hours, respectively. Feed consumption (FC), body weight (BW), and feed conversion ratio (FCR) were recorded weekly for broiler type chickens only. At four weeks of age, all groups of chickens were exposed to AHS (T = $39{\pm}1^{\circ}C$) for three hours. Before and after AHS challenge, body temperature (Tb), heterophil (H), and lymphocyte (L) counts were recorded, and H/L ratio was calculated. Antibody (Ab) response to sheep red blood cells (SRBC) was assessed from all treatments without being exposed to AHS. Group F of broiler-type chickens weighed less (p<0.05) compared to control group. Also, both A and F groups of broiler-type chickens consumed less (p<0.05) feed when compared to control group. Acute heat stress elevated Tb of all treatment groups, however the increase was more profound (p<0.001) in broiler chicks. Broiler chicks of both A and F groups showed a tendency to have higher (p = 0.08) Tb when compared to control group. Acute heat stress elevated (p<0.001) H/L ratio in both types of chickens. Broiler chicks maintained higher (p<0.001) H/L ratio. Both F and A groups reduced (p<0.01) the level of elevation in H/L ratio compared to control groups of both types of chickens. Neither A nor F group affected the Ab production in response to SRBC. However, there was a tendency towards higher Ab responses in F group when compared to other groups in both types of chickens. Results of the present study demonstrate that previous history of feed withdrawal or episodes of heat exposures improved chicks'physiological withstanding of AHS and a tendency to improved humoral immune response.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.1
• /
• pp.102-110
• /
• 2015

The purpose of this experiment was to determine and compare the digestibility of crude protein (CP) and amino acids (AA) in full-oil (no oil extracted) and de-oiled (oil extracted) corn distillers dried grains with solubles (DDGS) with different condensed distillers solubles (CDS) ratios. Six barrows ($29.6{\pm}2.3kg$) fitted with ileal T-cannula were allotted into a $6{\times}6$ Latin square design. Each period was comprised of a 5-d adaption period followed by a 2-d collection of ileal digesta. The five test diets contained 62% DDGS as the sole source of AA. A nitrogen-free diet was used to measure the basal endogenous losses of CP and AA. Chromic oxide (0.3%) was used as an index in each diet. The results showed that CP and AA were very similar in 5 DDGS, but the standardized ileal digestibility (SID) of lysine (from 56.16% to 71.15%) and tryptophan (from 54.90% to 68.38%) had the lowest values and largest variation within the essential AA, which suggests reduced availability of AA and different levels of Maillard reactions in the five DDGS. The apparent ileal digestibility and SID of CP and most of AA in full-oil DDGS (sources 1 and 2) were greater (p<0.05) than de-oiled DDGS (sources 3, 4, and 5). Comparing the AA SID in the 5 DDGS, full-oil with low CDS ratio DDGS (source 1) had non-significantly higher values (p>0.05) than full-oil with high CDS ratio DDGS (source 2); however, the SID of most AA of de-oiled with low CDS ratios DDGS (source 3) were non-significantly lower (p>0.05) than de-oiled with high CDS ratio DDGS (source 4); and the de-oiled DDGS with middle CDS ratio (source 5) but with different drying processing had the lowest SID AA values. In conclusion, de-oiled DDGS had lower SID of CP and AA than full-oil DDGS; a higher CDS ratio tended to decrease the SID of AA in full-oil DDGS but not in de-oiled DDGS; and compared with CDS ratio, processing, especially drying, may have more of an effect on AA digestibility of DDGS.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.8
• /
• pp.1265-1272
• /
• 2020

Objective: To evaluate the effect of feeding acidified milk on the growth and fecal microbial diversity of dairy calves. Methods: Twenty healthy 3-day-old female Holstein calves with similar body weights were selected and randomly divided into two groups. One group was fed pasteurized milk (PM, Control), while the other was fed acidified milk (AM) ad libitum until weaned (day 60). The experiment lasted until day 180. Results: There was no difference in the nutritional components between PM and AM. The numbers of Escherichia coli and total bacteria in AM were lower than in PM. At 31 to 40 and 41 to 50 days of age, the milk intake of calves fed AM was higher than that of calves fed PM (p<0.05), and the solid feed intake of calves fed AM was higher than that of calves fed PM at 61 to 90 days (p<0.05). The average daily gain of calves fed AM was also higher than that of calves fed PM at 31 to 60, 61 to 180, and 7 to 180 days (p<0.05). The calves fed AM tended to have a lower diarrhea rate than those fed PM (p = 0.059). Bacteroides had the highest abundance in the feces of calves fed AM on day 50, while Ruminococcaceae_UCG_005 had the highest abundance in the feces of calves fed AM on day 90 and calves fed PM on days 50 and 90. At the taxonomic level, the linear discriminant analysis scores of 27 microorganisms in the feces of calves fed AM and PM on days 50 and 90 were higher than 4.0. Conclusion: Feeding AM increased calf average daily gain and affected fecal bacterial diversity.