• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.2
• /
• pp.199-202
• /
• 2004

Cellulolytic bacterial strains have been isolated from the faeces of wild (blackbuck, Antilope cervicapra; nilgai, Baselophus tragocamelus chinkara, Gazella gazella spotted deer, Axis axis and hog deer, Cervus porcinus) and rumen liquor of domestic (sheep, Ovis aries) ruminants. Five best cellulose degrading bacterial isolates (Ruminococcus sp.) were used as microbial feed additive along with buffalo rumen liquor as inoculum to study their effect on digestibility of feed and enzyme production in in vitro conditions. The bacterial isolate from chinkara (CHI-2) showed the highest per cent apparent dry matter (DM) digestibility ($35.40{\pm}0.60$), true dry matter digestibility ($40.80{\pm}0.69$) and NDF ($26.38{\pm}0.83$) digestibility (p<0.05) compared to control ($32.73{\pm}0.56$, $36.64{\pm}0.71$ and $21.16{\pm}0.89$, respectively) and other isolates at 24 h of incubation with lignocellulosic feeds (wheat straw and wheat bran, 80:20). The same isolate also exhibited the highest activities of fibre degrading enzymes like carboxymethylcellulase, xylanase, ${\beta}$-glucosidase and acetyl esterase. The bacterial isolate from chinkara (Gazella gazella) appears to have a potential to be used as feed additive in the diet of ruminants for improving utilization of nutrients from lignocellulosic feeds.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.2
• /
• pp.275-279
• /
• 1993

A study using dairy heifers was conducted to determine the effect of environmental temperature on heat production differing in feed intake level. The design consisted of three levels of feed intake (low, medium and high) and two environmental chamber temperature (15 and $30^{\circ}C$) with four replications in each treatment. Rectal temperature (RT), respiration rate (RR), heart rate (HR) and heat production (HP) were then measured. At the both environmental temperature, RT, RR and HR increased with the increase in feed intake level. The RT and RR also increased with the elevation of environmental temperature. The HP of $30^{\circ}C$ was significantly higher (4.8-8.9%) than $15^{\circ}C$. The estimated metabolizable energy requirement for maintenance (MEm) was higher (p<0.05) at $30^{\circ}C$ ($554.7kJ/kg^{0.75}$ d) than $15^{\circ}C$ (464.9 kJ/kgd). It was suggested that the decreasing in productive efficiency under hot environmental conditions partly associated with the increase in HP, which associated with the change in heat loss mechanism from sensible path to evaporative path.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.3
• /
• pp.394-399
• /
• 2011

The effect of intermittent feeding on growth, feed utilization and body composition of subadult olive flounder fed extruded pellet (EP) in suboptimal temperature ($13.5{\pm}2.10^{\circ}C$) was determined. Two hundred twenty five subadult fish averaging 272 g were randomly distributed into fifteen of 300 L circular flow-through tanks (fifteen fish per tank). Five treatments with different days of feeding a week were prepared in triplicate: fish were hand-fed with EP to apparent satiation once a day, seven days a week (7DF), which was used as the control group or consecutive six, five, four and three days a week, for 12 weeks, referred to as 6DF, 5DF, 4DF and 3DF treatments, respectively. Weight gains and specific growth rates of fish in 6DF treatment were higher than those of fish in 7DF, 4DF and 3DF treatments, but not different from those of fish in 5DF treatment. Daily feed intake of fish in 6DF and 7DF treatments was higher than that of fish in 5DF, 4DF and 3DF treatments. Feed efficiency and protein efficiency ratio of fish were not different among treatments. There was no difference in the chemical composition of fish between treatments. Results of this study demonstrated that feeding five days per week could be recommended for subadult olive flounder fed extruded pellet in suboptimal temperature.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.3
• /
• pp.43-50
• /
• 1998

In the use of CNC machine tool, the unmanned production system has been growing in the manufacturing field. Thus, it is necessary to monitor adequate tool fracture during the cutting process efficiently. This experimental study is intended to investigate the development of flank wear in sysnchronous turning of differential materials(Aℓ/GC) which is used in industrial application and it is acknowledged as a machine to difficult material. In cutting process change of velocity, change of feed, and change of depth of cut were investigated on the effect of flank wear, and slenderness ratio is also investigated. The conclusions of this paper are summarized as follows; 1.Under the high cutting speed condition, the flank wear is affected by the feed and depth of cut. but the influence of feed on the flank wear is larger than the depth of cut and that is reduced when the velocity is low. 2.Under the high cutting speed, as the smaller slenderness ratio is, the shorter tool life is under the lower cutting speed, the effect of slenderness ratio on the flank wear is low. 3.Using the characteristics of cutting force, the flank wear of a tool can be detected 4. Investigating the development of flank wear, there are almost no differences between the characteristics of cutting force and feed force. Finally, these data from the differntial materials cutting process will be used in the basic field of precision and economic cutting process.

• Korean Journal of Poultry Science
• /
• v.21 no.4
• /
• pp.267-275
• /
• 1994

Three dietary ME levels of 3,200, 2,900 and 2,600 kcal /kg in the same 13% single-stage low protein diet were compared to evaluate the effect of ME levels of grower diets on egg-type pullet growth and subsequent laying performance. As the ME levels of grower diets decreased, cumulative feed and protein consumptions increased(P<0.05), however, the ME intake and body weight at 18 wk of age decreased(P<0.05). Grower feed cost decreased as the dietary ME level was decreased, but no significant difference was found among dietary ME levels of grower diets. During the laying period, sexual maturity, hen-day egg production and average egg weight were not significantly affected by the ME levels of grower diet, however, daily feed intake and feed required per egg decreased as the dietary ME level of grower diet was reduced(P<0.05). Results of this study indicate that pullets can be reared on the low ME diet of 2,600 kcal /kg and it would he economical to utilize the low energy diet during the growing period when they are reared on a 13% single-stage low protein diet.

• Korean Journal of Agricultural Science
• /
• v.46 no.2
• /
• pp.229-237
• /
• 2019

The influence of dietary supplementation with a yeast culture on growth performance, fecal score and nutrient digestibility was evaluated in weaned pigs in a 6-week feeding trial. A total of 50 weaning pigs with an initial average body weight (BW) of $7.46{\pm}1.60kg$ were randomly allotted into 1 of 2 dietary treatments according to the initial BW. There were 5 replicate pens in each treatment with 5 pigs per pen. The dietary treatments were as follows: 1) control, basal diet (CON) and 2) 0.10% yeast culture, basal diet supplemented with 0.1% yeast culture (YC). The average daily feed intake was significantly improved with the dietary supplementation of the yeast culture compared with the control during phases 1 and 3. Overall (0 to 6 weeks), dietary supplementation with the 0.1% yeast culture had a significant effect on the feed conversion ratio (FCR). There was no significant difference in the fecal score between the CON and YC dietary treatments. In addition, no difference in the apparent total tract digestibility was observed between the CON and YC dietary treatments. Collectively, the results of this study indicate that dietary supplementation of 0.1% yeast only improved the feed intake of weaning pigs; however, yeast culture supplementation did not affect the average daily gain, feed efficiency, total tract digestibility of dry matter, and nitrogen and energy levels as well as the fecal scores.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.2
• /
• pp.182-188
• /
• 1994

This expermintal study is intended to investigate he development of flank wear in turning os SUS304 which is used in industrial applications and is acknowledged as a machining difficult material. In cutting process, change of velocity, change of feed, and change of depth of cut were investigated about the effect of flank wear, and slenderness ratio is also investigated. The variations of unit cutting force with the change of rake angle and the change of uncut chip area are observed. The friction angles are calculated for the change friction force and observed. The friction angles are calculated for the change friction force and normal forcd on the different rake angles. From this experimental study, the following results can be said. 1. Under the high cutting speed condition, the flaank wear is affected by the feed and depth of cut, but the influence of feed and depth of cut to the flank wear is reduced when the velocity is low. 2. The smaller slenderness ratio is, the shorter the tool life results in high cutting speed, and the lower cutting speed is, the lower the effect of slenderness ratio to the flank wear is. 3. Using the characteristics of force-RMS, the flank wear of a tool can be detected. There are almost no differences between the RMS characteristics of cutting force and feed force.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.1
• /
• pp.98-105
• /
• 2018

Objective: This study aimed to assess the effect of pelleted and expanded sorghum-based feeds prepared with different moisture levels and particle size of ingredients on metabolizable energy, ileal digestibility of amino acids and broiler performance. Methods: The experiment was performed with 720 male broiler chicks of the Cobb strain, with treatments of six replications, with 15 birds each; they were arranged in a completely randomized design and $2{\times}2{\times}2$ factorial scheme (pelleted or expanded feed processing, 0.8% or 1.6% moisture addition in the mixer, and particle size of 650 or 850 microns). Results: Higher pellet quality (pellets, % and pellet durability index [PDI]) was obtained in expanded diets and inclusion of 1.6% moisture. The particle size of 850 microns increased the PDI of final diet. All studied treatments had no significant effect on weight gain and broiler carcass and cut yields. Lower feed conversion occurred for birds fed pelleted feed at 42 d. The highest apparent metabolizable energy (AME) and apparent metabolizable energy corrected to zero nitrogen balance (AMEn) values of feed in the initial rearing phase (10 to 13 days) were observed in birds fed pelleted feed or for feed prepared with 1.6% moisture. The highest ileal digestibility coefficients of amino acids were obtained with the consumption of pelleted feed prepared with a particle size of 650 microns and 1.6% moisture. Conclusion: Pelleted feed prepared with a milling particle size of 650 microns and 1.6% moisture provided increased ileal digestibility of amino acids and AMEn in the starter period. However, the expanded feed improved pellet quality and feed conversion of broilers at 42 days of age. We conclude that factors such as moisture, particle size and processing affect the pellet quality, and therefore should be considered when attempting to optimize broiler performance.

• Clinical and Experimental Reproductive Medicine
• /
• v.11 no.2
• /
• pp.17-25
• /
• 1984

Hypothalamic-pituitary function in patients of 6 selected groups of amenorrhea was evaluated by performing premarin test. Selected amenorrheic patients were divided into 6 groups of Turner's syndrome(5), adrenogenital syndrome(3), Sheehan's syndrome(4), moderate hyperprolactinemia(3), severe hyperprolactinemia(9) and functional oligoamenorrhea(9) the diagnoses of which were performed according to modified our own protocol for management of amenorrheic patients. As control 20 normally cycling women in mid follicular phase determined by their symptothermal charts during last 6 months designed by WHO were compared. The premarin test which is one of the tests evaluating the hypothalamic-pituitary function by the principle of negative and positive feed back effect's of estrogen was performed by injecting 20 mg of premarin in volus intravenously. The levels of serum LH before, 24, 48, 72, 96 and 120 hours after injection of premarin were measured by double antibody technique radioimmunoassay the reagents of which were supplied by WHO. The results were as follows: 1. Both negative and positive feed back effects by exogenous estrogen were well preserved even in the patients of gonadal dysgenesis although the baseline levels were much higher than normal. 2. In the patients of Sheehan's syndrome one could observe the minimal response of feed back effect in the case with minimal pituitary function. 3, Androgens in adrenogenital syndrome and prolactin in hyperprolactinemia may suppress mainly the positive feed back effect rather than the negative one. The suppressive effect can be abolished by proper treatments which can eliminate those suppressive hormones. 4. This premarin test may be beneficial for predicting the result of clomiphene in ovulation induction.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.6
• /
• pp.825-833
• /
• 2011

Forty-five Hisex commercial layers and forty-five local Saudi breed layers were used to determine the acceptable limit of short-term water restriction in the late phase of production, when the problem of high feed and water consumption is expected. The experiment was performed under hot and arid environmental conditions when the layers were at fifty weeks of age. Layers from each breed were randomly assigned in groups of five into nine floor pens. The average environmental temperature was 37.2-$38.6^{\circ}C$, and the relative humidity was between 20 to 37%. The trial was divided into 3 periods; control (1 week), water restriction (2 weeks) and rehydration (1 week). During the restriction period, layers from each breed were divided into three groups that received 20, 40, and 0% restriction of drinking water relative to their consumed water during the control period. During the study, feed and water consumption, body weight, changes in body weight, egg production, primary antibody response to SRBC, and rectal temperature were evaluated. Water restriction did not result in any clear effect on feed intake in either breed, however, commercial layers tended to consume less feed compared to the local breed. Body weight declined with water restriction during the first week of restriction in the commercial breed regardless of rate of restriction, but it was delayed until the second week in the local breed. Water restriction of 40% decreased egg production in both breeds but with a delay of 1 week in the local breed. Antibody level to SRBC was not affected by water restriction in the commercial line while it was highly affected in the local breed. A water restriction of 20% is considered to be an acceptable limit under the current experimental conditions without a negative effect on egg production in both breeds and considering the immune status of the local breed. Whereas, 40% restriction had a negative effect on egg production, and varied effects in the other traits in both breeds.