• Investigative Magnetic Resonance Imaging
• /
• v.7 no.1
• /
• pp.22-30
• /
• 2003

Purpose : The efficacy of magnetic resonance imaging for evaluating coronary artery disease has been reported. In this study, we evaluated the usefulness of breath-hold segmented K-space cine MR imaging for evaluating the patency of coronary artery bypass grafts (CABG). Materials and Method s : Thirty eight patients with a total of 92 CABGs (36 internal thoracic arteries and 56 saphenous vein grafts) were evaluated using segmented K-space cardiac-gated fast gradient echo sequence (2D-FASTCARD) MR imaging. MR magnitude images were evaluated from the hard copies by two independent observers. A graft was defined as patent if it was seen as a bright small round area on at least two consecutive images throughout the cardiac cycle at a position consistent with the expected location for that graft. Results : MR images were obtained successfully for 23 patients (61%). The sagittal planes were most helpful in visualizing the cross-section of sapheneous vein bypass graft to left circumflex artery branch, whereas the transverse planes were used for identification of internal mammary artery grafts to left anterior descending coronary artery or its branch and identification of saphenous vein grafts to right coronary artery. Forty five grafts were visible using this MR technique, while the grafts were not visible on seven saphenous vein grafts and two internal mammary artery grafts. In two patients showing symptoms of myocardial ischemia, one or two bypass grafts were not visible. Imaging, perpendicular plane to a CABG was important to visualize the flow inside the CABG with maximum sensitivity. Conclusion : Evaluation of patency of the bypass graft was clinically feasible by 2D-FASTCARD MR imaging, whereas any invisible bypass grafts should be further studied by contrast-enhanced MR angiography or by conventional angiography for confirmation of abnormalities.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1141-1151
• /
• 2007

In this paper through Honam high-speed railroad which is planned with the north and south axis, we will verify the feasibility of the coordinate conversion using railroad control points after regarding current planned-railroad as the linear central axises. From analysis, distortion of Y axis varies 21cm to 40cm diminishing to a gentle straight line, distortion of X axis varies 14cm to 29cm. Through a revision, the deviation value between the coordinates were 6mm to 9mm and it satisfied the allowable error of national geographic information institute which is following ITRF (International Terrestrial Reference Frame) and cadastral boundary survey(10cm). consequently the coordinate conversion is possible using railroad control points as common control points.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.3
• /
• pp.82-90
• /
• 2009

The aim of this study is to identify the spatial foundation units required to execute a rural village landscape plan. Though there have been various previous studies on spatial foundation units for rural space and landscape elements, they are limited in clarifying the landscape identity of a rural village unit in creating a feasible a rural village landscape plan. Therefore, it is necessary to identify the natural spatial features of a rural village and then establish a landscape identity for each space by exploring the landscape elements for each rural village unit set as the basic unit. Accordingly, the basic spatial unit was analyzed through a 1:5000 scale mapping by applying geomancy theory to the spatial landscape unit in a naturally generated rural village. The spatial limitations for a rural village landscape were set based on the analysis. Afterwards, a field study on the feasibility of whether or not setting a space as the basic unit for landscape could have a sense of identity as a single landscape unit for verification was processed, and the spatial limitations for the landscape were adjusted. Moreover, landscape elements were investigated by classifying landscape resources based on rural amenity resources which have been diversely researched in terms of the set spatial boundaries, and the sense of identity for each landscape foundation unit was looked into. While the numerous preceding studies focused on exploring the rural landscape value and findingout the sense of identity on landscape elements, it is high time for feasible and applicable studies in conducting region-specific landscape plans. In particular, similar outcomes from all landscape plans, even those with the same purpose established in various regions, is not a desirable outcome. Therefore, a basic framework is needed to discover the landscape identity generated by each plan in a rural area space. In this sense, this study is significant in that itcan be utilized to establish spatial identity of each region and landscape features of each rural village, and come up with realistic alternatives in landscape plans for each region by exploring the landscape identity in each specific space divided per watershed in a single zone.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.5
• /
• pp.29-39
• /
• 2018

Recently, In traditional markets, visitors are declining. The reason is the growth of large stores and Internet shopping malls. The government continues to support and policy to revitalize traditional markets. Government support has been focused on the selective attributes of traditional markets. However, the purchase intention of users in traditional markets is lowered. The reason is that it is in the hygiene of the traditional market. This study analyzed whether the optional attributes of traditional markets and service quality increase the intention of visit, In addition, the users of the traditional market analyzed the hygiene factor as an important factor in the intention of the visit. The results of the analysis is First, convenience, accessibility, transparency, attractiveness, and economic feasibility of selective attributes of traditional markets were analyzed to affect the intention to visit. Second, the merchant efficiency, the display efficiency, the product efficiency, and the transaction efficiency of the service quality of the traditional market influence on the visit intention. However, facility efficiency was not found to have any effect. Third, merchant hygiene factors, facility hygiene factors, and commodity hygiene factors were found to affect the intention to visit. These traditional market hygiene factors were analyzed to control the intention to visit. Therefore, it can be said that the hygiene factor of the traditional market plays a role in raising the intention of visiting the traditional market in activating the traditional market. The conclusion is that merchants and support groups should be prioritized in order to revitalize traditional markets. The importance of environmental hygiene is introduced and implications for research results are suggested.

• Journal of Distribution Science
• /
• v.10 no.7
• /
• pp.33-41
• /
• 2012

The purpose of this study is to analyse the state of the energy industry and to determine the efficiency of its functioning on the basis of energy conservation principle and application of innovative technologies aimed at improving the ecological modernisation of agricultural sectors of Kazakhstan. The research methodology is based on an integrated approach of financial and economic evaluation of the effectiveness of the investment project, based on calculation of elasticity, total costs and profitability, as well as on comparative, graphical and system analysis. The current stage is characterised by widely spread restructuring processes of electric power industry in many countries through introduction of new technical installations of energy facilities and increased government regulation in order to enhance the competitive advantage of electricity market. Electric power industry features a considerable value of creating areas. For example, by providing scientific and technical progress, it crucially affects not only the development but also the territorial organisation of productive forces, first of all the industry. In modern life, more than 90% of electricity and heat is obtained by Kazakhstan's economy by consuming non-renewable energy resources: different types of coal, oil shale, oil, natural gas and peat. Therefore, it is significant to ensure energy security, as the country faces a rapid fall back to mono-gas structure of fuel and energy balance. However, energy resources in Kazakhstan are spread very unevenly. Its main supplies are concentrated in northern and central parts of the republic, and the majority of consumers of electrical power live in the southern and western areas of the country. However, energy plays an important role in the economy of industrial production and to a large extent determines the level of competitive advantage, which is a promising condition for implementation of energy-saving and environmentally friendly technologies. In these circumstances, issues of modernisation and reforms of this sector in Kazakhstan gain more and more importance, which can be seen in the example of economically sustainable solutions of a large local monopoly company, significant savings in capital investment and efficiency of implementation of an investment project. A major disadvantage of development of electricity distribution companies is the prevalence of very high moral and physical amortisation of equipment, reaching almost 70-80%, which significantly increases the operating costs. For example, while an investment of 12 billion tenge was planned in 2009 in this branch, in 2012 it is planned to invest more than 17 billion. Obviously, despite the absolute increase, the rate of investment is still quite low, as the total demand in this area is at least more than 250 billion tenge. In addition, industrial infrastructure, including the objects of Kazakhstan electric power industry, have a tangible adverse impact on the environment. Thus, since there is a large number of various power projects that are sources of electromagnetic radiation, the environment is deteriorated. Hence, there is a need to optimise the efficiency of the organisation and management of production activities of energy companies, to create and implement new technologies, to ensure safe production and provide solutions to various environmental aspects. These are key strategic factors to ensure success of the modern energy sector of Kazakhstan. The contribution of authors in developing the scope of this subject is explained by the fact that there was not enough research in the energy sector, especially in the view of ecological modernisation. This work differs from similar works in Kazakhstan in the way that the proposed method of investment project calculation takes into account the time factor, which compares the current and future value of profit from the implementation of innovative equipment that helps to bring it to actual practise. The feasibility of writing this article lies in the need of forming a public policy in the industrial sector, including optimising the structure of energy disbursing rate, which complies with the terms of future modernised development of the domestic energy sector.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.11
• /
• pp.771-780
• /
• 2014

In this study, the various organic supports (i.e., silicone, acrylonitrile-butadiene-styrene, epoxy, and, butadiene rubber) with great sorption capacity of organic contaminants were chosen to develop nano-ZnO/organic composites (NZOCs) and to prevent the detachment of nano-ZnO particles. The water resistance of the developed NZOCs were evaluated, and the feasibility of the developed NZOCs were investigated by evaluating the removal efficiency of 1,1,2-trichloroethylene (TCE) in the aqueous phase. Based on the results from water-resistance experiments, long-term water treatment usage of all NZOCs was found to be feasible. According to the FE-SEM, EDX, and imaging analysis, nano-ZnO/butadiene rubber composite (NZBC) with various sizes and types of porosity and crack was measured to be coated with relatively homogeneously-distributed nano-ZnO particles whereas nano-ZnO/silicone composite (NZSC), nano-ZnO/ABS composite (NZAC), and nano-ZnO/epoxy composite (NZEC) with poorly-developed porosity and crack were measured to be coated with relatively heterogeneously-distributed nano-ZnO particles. The sorption capacity of NZBC was close to 60% relative to the initial concentration, and this result was mainly attributed to the amorphous structure of NZBC, hence the hydrophobic partitioning of TCE to the amorphous structure of NZBC intensively occurred. The removal efficiency of TCE in aqueous phase using NZBC was close to 99% relative to the initial concentration, and the removal efficiency of TCE was improved as the amount of NZBC increased. These results stemmed from the synergistic mechanisms with great sorption capability of butadiene rubber and superior photocatalytic activities of nano-ZnO. Finally, the removal efficiency of TCE in aqueous phase using NZBC was well represented by linear model ($R^2{\geq}0.936$), and the $K_{app}$ values of NZBC were from 2.64 to 3.85 times greater than those of $K_{photolysis}$, indicating that butadiene rubber was found to be the suitable organic supporting materials with enhanced sorption capacity and without inhibition of photocatalytic activities of nano-ZnO.

• Radiation Oncology Journal
• /
• v.11 no.2
• /
• pp.355-361
• /
• 1993

Since May 1991, authors have conducted a pilot study to determine the feasibility and evaluate the effect of concurrent radiation therapy and chemotherapy with 5-FU and Cis-platinum for locally advanced cervical cancer (stage IIB-IVA). Radiation therapy consisted of external irradiation to whole pelvis (4140 cGy/23 fx) in 4.5 weeks followed by high dose rate intracavitary radiation therapy (HDR ICRT) to deliver a dose of 30 to 35 Gy to A point in 6 to 7 fractions. After the intracavitary radiation therapy, parametrial boost was delivered for B point dose of 60 Gy in Stage IIB and 65 Gy in stage IIIB. 5-FU (1000 $mg/m^2/24hr$ for 96 hour iv infusion) and Cis-platinum (20 $mg/m^2/day$ IV bolus for 3 days) were given during the second week of external RT and the second course chemotherapy administered at the first HDR ICRT with the same method as the first chemotherapy. Sixteen patients (10 stage IIB,4 stage IIIB,2 stage IVA) were registered to this protocol. Among these 16 patients, two refused treatment after 2 fractions of external irradiation, and one could not continue intracavitary irradiation because of treatment related genitourinary toxicity. So 14 patients were evaluated for toxicity and 13 patients were evaluated for response analysis. Five of 14 patients developed grade 3 gastrointestinal toxicity but 4 of them recovered at the completion of treatment. One stage IIIB patient with inguinal lymph node metastasis who received higher dose of radiation in spite of initial poor performance status did not recover from gastrointestinal toxicity at the completion of treatment. And she died of distant metastasis at one month after the completion of treatment. Two of 14 evaluable patients showed weight loss, more than $10\%$ of initial weight. One patient developed grade 3 leukopenia. In this study, the average total treatment period of completely treated patients was 75 days and three of them took more than 80 days (84, 84, 89 days). Toxicities were generally acceptable and there were no treatment related death. At the last follow-up, complete response was achieved in $62\%(8/13)$ and especially of nine patients with stage IIB, eight patients showed complete response. This study suggests that concurrent radiation therapy and chemotherapy (5-FU and Cis-platinum) is tolerable and effective. Further follow-up is needed to determine whether this protocol will have a favorable impact on survival and to evaluate the late effect on normal tissues. In future, prospective randomized trials are needed to compare the standard radiation therapy alone with concurrent chemotherapy and radiation therapy for locally advanced cervical carcinoma.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.3
• /
• pp.243-253
• /
• 2006

This study was designed to investigate the feasibility of utilizing concentrates of sunmul(soybean curd whey), the waste by-product of soybean curd processing, as functional food ingredients. Sunmul was concentrated by nanofiltration fo11owing ultrafiltration and then freeze-dried. The oil adsorption capacity of the nanofiltraion(NF) powder(97.33g/100g) was similar to that of sunmul powder(94.17g/100g), but was lower than that of ISP(isolated soy protein). However, the water holding capacity of NF powder could not be determined because the NF powder completely dissolved in water. The protein solubilities of sunmul powder and ISP in distilled H$_{2}$O, 0.1M and 0.5M NaCl were lowest at pH 4.0 and increased at more acidic or alkaline conditions. However, the protein solubility of NF powder was at its minimum at pH 6.0 and increased at more acidic or alkaline conditions. Emulsifying activity indexes of NF powder in 4% and 6% solution were minimal at pH 4.0 and 6.0, respectively, which were 3 to 8 times lower than that of sunmul powder. The emulsion stability of 4% sunmul solution was lowest at pH 4.0, but that of NF powder was highest at pH 5.0 and decreased at more acidic or alkaline conditions at all concentrations of solution. The total free amino acid contents of protein in sunmul, and NF power were 99.07 and 2,110.10mg%, respectively, and NF powder exhibited especially high threonine content. Rapid viscosity analysis of dough with 1 to 5% added NF powder demonstrated that all of the peak and final viscosities decreased with increasing NF powder concentration compared to the control.

• Journal of Engineering Education Research
• /
• v.11 no.4
• /
• pp.11-18
• /
• 2008

Companies have been making considerable efforts to develop innovative products for better competitiveness in the market, however, the education curriculum for innovative product development (IPD) in domestic universities needs has not been well developed. The present study was intended to identify the needs of students and practitioners regarding teaching subjects, pedagogical methods, and industry-academia collaboration that can be reflected in the development of IPD education curriculum. Through a literature survey 46 IPD teaching subjects of 7 categories (planning, feasibility analysis, concept development, product design, manufacturing process design, production, and ethics & law) were selected. Opinions on the preferences and importances of the teaching subjects, pedagogical methods, and industry-academia collaboration were collected from 53 college students who took courses of product development and 36 practitioners working in product development. While the students preferred the balanced teaching of all the subject categories, the practitioners suggested planning and concept development be taught with high importance; 6 subjects (product development strategy, customer needs identification, market research, concept generation method, design ideation method, and ergonomic design) received high ratings of preference and importance. The students preferred the mix of various pedagogical methods (lecture, discussion, presentation, practice, and case study) and provided needs on each pedagogical method. Lastly, the students wanted an opportunity of learning through industry-academia collaboration and the practitioners provided ideas for mutual benefits between industry and academia. The needs of students and practitioners identified in the study can be effectively applied to develop a better IPD education curriculum.

• Survey Research
• /
• v.6 no.1
• /
• pp.1-38
• /
• 2005

Considering the importance of corruption index measurement model and the diffusion of popular awareness about the importance of anti-corruption, this research compared and analyzed existing corruption index measurement models. This paper has selected "Anti-Corruption Index model(ACI model)" that was developed by Seoul Development Institute and "CCEJ's Corruption Index model" which is under use by the Citizens' Coaltion for Economic Justice. These two models were analyzed in terms of appropriateness of 'the indicator and index choice method', 'the research design' and 'the use of statistical data'. This analysis shows that two models have some problems. First, at the level of indicator and index choice method, the indicators of CCEJ's corruption index model is too atomized and redundant. As not putting weight of indicator, it did not consider importance of each indicator. Citizens who evaluated the level of corruption didn't participate in the weight evaluation team, which results in failure of the model to reflect the citizens' opinion. Also, because the question about Seoul Metropolis' corruption level is not included, it is not detected difference between real corruption level and perceptive corruption level. Second, in terms of appropriateness of research design, the sample of the CCEJ' corruption index model is too small to get credibility. The objectivity of research method seems to be low because survey was performed by exit interview. In addition, 38 items are overfull in the questionnire of CCEJ's corruption index model compare to 13 items in ACI model. Also, in making up questions, the terms are redundant and unobvious. Third, in regarding with feasibility of the statistical data, the CCEJ's corruption index model uses regulation data for disciplinary punishment of 25 local governments in Seoul from 1995 to 1999. But, it is common ideas of scholars that statistical data indicates the tip of an iceberg in corruption. So for using a statistical data, it needs a data of enough quantity and has a high level credibility. In addition, objective method of giving weight is not developed. In this point of view, the use of statistical data has some limits. To solve this problem, ① objective data should be included in the indicators, ② various indicators should be developed and ③ a method of giving weight should be improved.