• 지질공학
• /
• 제20권1호
• /
• pp.71-78
• /
• 2010

강원도 삼척시 가곡면과 태백시 철암동에 위치한 가곡광산은 묘봉층 및 풍촌층내의 석회암과 화강반암의 접촉부에 배태된 접촉교대광산이다. 본 광산에서 지구물리탐사는 갱내 및 광산 주변부에 광화대의 부존 여부와 그 연장선을 파악하기 위하여 갱구 부근에서 자력탐사, 갱내에서 전기비저항 탐사 및 갱도-갱도 전기비저항 토모그래피탐사를 실시하였다. 자력탐사는 광화대의 영향으로 인한 이상대가 확연히 나타나지 않았지만, 전기비저항 탐사 및 토모그래피 탐사는 광화대에 대한 영상이 성공적으로 반영되었는데, 이는 본 연구지역에 존재하는 $N50^{\circ}W$계의 단층 연장선과 관련된 것으로 해석되어진다.

• 보존과학회지
• /
• 제37권6호
• /
• pp.617-625
• /
• 2021

울주군 대곡리 일대의 대곡천은 가지산 도립공원에서 양산단층을 가로질러 태화강 합류지점에 이르는 계곡과 암반이 발달된 지역이다. 계측할 반구대 암각화 암반은 광물학적 풍화, 절리, 하부의 세굴이나 공동이 확인되었다. 본 계측은 반구대 암각화가 세겨진 암반의 절리면을 대상으로 단기간 계측을 수행하였다. 기존 광섬유를 이용한 계측값(Ch4 150 ㎛)과 비교하여 비부착, 비접촉식 계측기는 300㎛의 변위값이 계측되었다. 향후, 시간대별 조도값에 적합한 HSV값의 적용과 다양한 계측경험이 누적될 경우, 본 계측기는 다양한 문화재에 활용이 가능할 것으로 판단된다.

• 자원환경지질
• /
• 제2권2호
• /
• pp.53-67
• /
• 1969

Magnetite deposit of Pocheon Iron Mine is a contact replacement skarn deposit embedded in the carbonate rocks (limestone and dolomite) which are intruded by granite porphyry. The shape of ore bodies is sweet potato-like and/or irregular massive form; D-ore body, the biggest one is of $180m{\times}40m{\times}200m$ in size. The ore is in general of high grade. The location of the ore bodies is controlled by the fault which strikes north south and dips $60^{\circ}$ to $70^{\circ}$ to the west. A regular distribution of mineralized zones is recognized in order of outward (hanging wall side) from granite porphyry as follows: compact fine-grained skarn, limesilicates, magnetite ore body, marble, limesilicates, pyritized meta-sediments.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1180-1185
• /
• 2014

This paper describes the effects on SUS tube of power optical fiber composite cable on underground transmission lines. The effects on grounding, air gap between SUS tube and metal sheath, contact resistance between outer semi-conducting layer and metal sheath and grounding of SUS tube application or not are variously analysed using EMTP in normal operating condition as well as single line to ground fault. From these results, in this paper, the scheme for protecting the electrically abnormal phenomena will be established on power-optical fiber composite cable of underground transmission lines. This paper can contribute to specification of grounding reference of SUS tube of optical fiber composite power cable system.

• Journal of Astronomy and Space Sciences
• /
• 제16권2호
• /
• pp.199-208
• /
• 1999

In this paper, KOMPSAT satellite launch and deployment operations are discussed. The U.S. Taurus launch vehicle delivers KOMPSAT satellite into the mission orbit directly. Launch and deployment operations is monitored and controlled by several international ground stations including Korean Ground Station (KGS). After separation from launch vehicle, KOMPSAT spacecraft deploys solar array by on-board autonomous stored commands without ground inter-vention and stabilizes the satellite such that solar arrays point to the sun. Autonomous ground communication is designed for KOMPSAT for the early orbit ground contact. KOMPSAT space-craft has capability of handing contingency situation by on-board fault management design to retry deployment sequence.

• 한국전기전자재료학회논문지
• /
• 제14권7호
• /
• pp.578-583
• /
• 2001

The bushing for high voltage and large and power should endure weight of itself and force of pushing from contact with circuit breaker. Like this, epoxy mold bushing has to be strong without fault. However, the external circumstances and internal factors was caused by partial discharge, flashover and dielectric breakdown. Therefore, to remove external factor of defect and to prevent the internal cracks and cavity generated from the contraction on interface of Cu-Epoxy, we should form semi-conductive layer on Cu bar by carbon. Then, the PD properties and the insulation qualities of epoxy mold type bushing was able to improved by roles of cushions for the direction of diameter and by effects fo natural sliding like as separated from conductor for the direction of length. So, in this work, we could prove the method of semi-conductive layer in making the long conductor.

• 산업기술연구
• /
• 제34권
• /
• pp.67-70
• /
• 2014

In this paper, we propose a diagnosis algorithm for 25.8kV $N_2$ insulated Pad-mounted Switchgear in oder to improve reliability by preventing of fault in advance. The proposed algorithm can diagnose the problems of Pad-mounted Switchgear such as gas leakage and VI(Vacuum Interrupter) trouble (contact abrasion, coil aging etc.) by using pressure sensor, stroke sensor and coil current sensor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.524-526
• /
• 1997

High speed DC circuit breakers (HSCB) are indispensable for protection of DC electric subway substations from fault current. However, the HSCB has mechanical contact to wear, which requires rather frequent maintenance, we have succeeded in developing and manufacturing a GTO DC circuit breaker using GTOs and ZnO varistors. In this paper, we describes the outline of the system itself, its characteristics and test data.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.51-54
• /
• 2001

This Paper is described basic principles of arc quenching in Molded Case Circuit Breaker. We analyzed magnetic blowout forces acting on the arc in contact system when circuit breakers interrupt fault currents in different three models by 3-D FEM(Finite Element Method). The interrupting time simulated is compared with that of short circuit tests. The results of this study derive valid of the simulation method and present the techniques to improve arc quenching performance.

• 한국재료학회지
• /
• 제3권2호
• /
• pp.193-196
• /
• 1993

A procedure for preparing cross-sectional specimens for transmission electron microscopy(TEM)by focused ion beam(FIB)milling of specific regions of semiconductor devices is outlined. This technique enables TEM specimens to be pripared at precisely preselected area. In-situ #W thin film deposition on the top surface of desired site is complementally used to secure the TEM specimens to be less wedge shaped, which is main shortcoming of previous FIB-assisted TEM sample preparation technique. This technique is quite useful for the TEM sample priparation for fault finding and the characterization of fabrication process associated with submicron contact technologies.