• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.519-529
• /
• 2009

Fiber reinforced composite materials have various advantages in mechanical and chemical aspects. Not only high fatigue and chemical resistance, but also high specific strength and stiffness are attained, and therefore, damping characteristics are beneficial to marine piles. Since piles used for marine structures are subjected to compression and bending as well, detailed research is necessary. Current study examine the mechanical behavior under flexural and/or compressive loads using concrete filled fiber reinforced plastic composite piles, which include large size diameter. 25 pile specimens which have various size of diameters and lengths were fabricated using hand lay-up or filament winding method to see the effect of fabrication method. The inner diameters of test specimens ranged from 165 mm to 600 mm, and the lengths of test specimens ranged from 1,350 mm to 8,000 mm. The strengths of the fill-in concrete were 27 and 40 MPa. Fiber volumes used in circumferential and axial directions are varied in order to see the difference. For some tubes, spiral inner grooves were fabricated to reduce shear deformation between concrete and tube. It was observed that the piles made using filament winding method showed higher flexural stiffness than those made using hand lay-up. The flexural stiffness of piles decreases from the early loading stage, and this phenomenon does not disappear even when the inner spiral grooves were introduced. It means that the relative shear deformation between the concrete and tube wasn't able to be removed.

• 한국노년학
• /
• v.30 no.3
• /
• pp.793-802
• /
• 2010

The purpose of this study was to examine the influence of extreme heat on muscle function and muscle injury marker in elderly women. The subjects of this study were eight post-menopausal elderly women without any metabolic disease. All eight subjects were asked to perform the knee joint isokinetic exercise using isokinetic equipment (cybex) in the laboratory and experimental temperature within laboratory was adjusted to two conditions: extreme heat temperature(33±0.5℃) and normal temperature(20±0.5℃) maintained in 50±3% humidity conditions. Each experimental exercise was monitored and analyzed the change of HSP70, LDH and CK. Muscular functions (peak torque, total work, percentage of peak torque body weight, fatigue index, average power and total work) were significant differences at exercise between temperatural conditions (p<.05). In extreme heat temperature, muscular injury markers (HSP70, LDH and CK) were increased, threfore resulted in significantly higher than normal temperature(p<.05). These results show that extreme heat temperature can decrease muscle function in elderly women.

• Journal of the Korean Society of Physical Medicine
• /
• v.19 no.1
• /
• pp.53-60
• /
• 2024

PURPOSE: The study aimed to analyze the effect of pillow height on upper trapezius and sternocleidomastoid (SCM) muscle activity and overall human body comfort to determine the optimal pillow height. METHODS: The study included 32 healthy college students, of both genders, who provided prior consent. It examined three pillow heights (flat, 6cm, 12cm) and measured the upper trapezius and SCM muscles using ultrasonography, myotone, and electromyography(EMG). Muscle activation, thickness, and fatigue were assessed. RESULTS: The study found significant differences in muscle thickness and muscle tone based on the pillow heights (flat, 6cm, and 12cm) with a p < .05. The SCM and upper trapezius muscles were thinnest at a pillow height of 6cm. Muscle tone in the SCM was lower at both 6cm and 12cm pillow heights. Post-hoc measurements showed significant differences in both the SCM and upper trapezius muscles thickness at the 6cm pillow height (p < .05). Also, significant differences in muscle tone were observed only in the SCM, particularly between the 6cm and 12cm pillow heights. CONCLUSION: The ultrasonography and myotone measurements showed a significant difference in muscle thickness and muscle tension, both of which were above 6cm, while there was no difference in muscle activation. Based on the strong correlation between muscle tension and muscle thickness with pillow height, this study concluded that the human body feels comfortable with a 6cm pillow height. Therefore, it is recommended to use a pillow height of 6cm when lying in a supine position.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.3
• /
• pp.311-319
• /
• 2012

Purpose: One of the critical aspects on dispensing glasses is to match the center of pupils to the optical center of lenses as the mismatched glasses are able to induce uncomfortable effects called prism which has been known to induce phoria, a main cause for asthenopia in many cases. Therefore, we investigated the induced prism occurred by mismatching centers between the center of pupils and the optical center of lenses. Methods: In this study, total 103 subjects were examined whether the center of pupils and the optical center of lenses are matched in horizontal and vertical directions, and then, the data was categorized into 4 groups based on the structural components of glasses. Total amount of prism was compared to show the effect of the glasses frame on the prism induction, and the value of measured prism was compared with the German RAL-RG 915 regulations. Results: The results in respect to the horizontal component showed that the induced prism was not found in 10.7% of total subjects. 73.8% of total subjects were influenced by induced prism, the range of prism was in a tolerance level. However, the 15.5% of total subjects seemed to be influenced by prism which is out of the criterion of tolerance. In case of vertical component, 23.3% of total subjects showed no effects of prism while early adopting glasses, 54.4% of total subjects showed a little prism effect within the criterion of tolerance, and 22.3% of total subjects showed the prism effect out of the tolerance range. This data indicates that group A and B that are less likely adjustable by fitting induce more prism than group C and D in horizontal and vertical components. Conclusions: In higher refractive error condition, it was found that aligning the optical center of lenses with the center of pupils by pre-fitting of glasses frame minimized prism induction in horizontal and vertical components, which ameliorates ocular fatigue. Therefore, appropriate optometric dispensing through fitting by opticians and precise design about monocular PD and monocular Oh are necessary to improve visual perception.

• Journal of Digital Contents Society
• /
• v.13 no.2
• /
• pp.225-233
• /
• 2012

The 3D stereoscopic image contents have been emerging as the blue chip of the contents market of the next generation since the . However, all the 3D contents created commercially in the country have failed to enter box office. It is because the quality of Korean 3D contents is much lower than that of overseas contents and also current 3D post production process is based on 2D. Considering all these facts, the 3D editing process has connection with the quality of contents. The current 3D editing processes of the production case of are using the way that edits with the system on basis of 2D, followed by checking with 3D display system and modifying, if there are any problems. In order to improve those conditions, I suggest that the 3D editing process contain more objectivity by visualizing the depth data applied in some composition work such as Disparity map, Depth map, and the current 3D editing process. The proposed process has been used in the music drama , comparing with those of the film . The 3D values could be checked among cuts which have been changed a lot since those of , while the 3D value of drew an equal result in general. Since the current process is based on an artist's subjective sense of 3D, it could be changed according to the condition and state of the artist. Furthermore, it is impossible for us to predict the positive range, so it is apprehended that the cubic effect of space might be perverted by showing each different 3D value according to cuts in the same space or a limited space. On the other hand, the objective 3D editing by applying the visualization of depth data can adjust itself to the cubic effect of the same space and the whole content equally, which will enrich the 3D contents. It will even be able to solve some problems such as distortion of cubic effect and visual fatigue, etc.

• Journal of Korean Dental Hygiene Science
• /
• v.7 no.1
• /
• pp.39-52
• /
• 2024

Background: Dental hygienists provide direct dental care in the closest proximity to the patient, and each practice requires a high level of focus and concentration. These skills are an important human resource that can impact the quality of dental care services. Since more than half of dental clinics provide as overtime work in addition to regular hours, this study aims to determine the association between working overtime and job performance for dental hygienists. Methods: The study was conducted using a combination of online and in-person surveys via Google Forms among 131 employed dental hygienists. The survey consisted of 7 questions on demographic and work characteristics, 16 questions on characteristics related to overtime and the effect of overtime on job security, health, and life, and 10 questions on job performance, for a total of 33 questions. Chi-square analysis and independent samples t-test were used to identify the characteristics of demographic and work characteristics, and descriptive statistics analysis was used for the characteristics of overtime. Independent samples t-test was used to test the difference in the mean of job performance according to whether or not they worked overtime, and linear regression analysis was used to show the association of working overtime and job performance. Results: The study found that 71% of dental clinics worked overtime. The average number of overtime per week was once (78.5%), and the most common problems with overtime were fatigue (52.7%) and lack of personal and leisure time (41.9%). The appropriate number of overtime per week considered by dental hygienists was once a week, which was confirmed to be 94.6%. When comparing job performance by overtime status, those who worked overtime were 3.38 points higher than those who did not (35.45 vs. 32.07). Multiple linear regression analysis of the association of working overtime night and job performance showed that a one-unit increase in worked overtime was associated with a statistically significant increase in job performance of about 3.1 (p<0.01). Conclusion: Working overtime was found to have a positive effect on job performance among dental hygienists. Therefore, as a way to improve the working environment, providing appropriate compensation or welfare for overtime can reduce the negative aspects of overtime and turn it into a positive influence on job performance. This could ultimately raise awareness of the dental hygienist as a professional and effect the efficiency of dental care services.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.5
• /
• pp.583-594
• /
• 2000

Dislodgement of a crown or extension bridge and the loosening of a retainer of a bridge is a serious clinical problem in fixed restoration. Generally these problems are considered to be associated with deformation of the restoration. During biting, the restoration is subjected to complex forces and deforms considerably within the limit of its elasticity. Deformation of the restoration under the occlusal force induces excessive stress in the cement film, which then leads to the cement fracture. Such a fracture may eventually cause loss of the restoration. Because most of the past retention tests for full veneer crown were done without fatigue loading, they were not exactly simulating intraoral environment. And the purpose of this study was to evaluate the effect of cyclic cantilever loading on the retentive strength of full veneer crowns depending on different type of cements and taper of prepared abutment. Steel dies with $8^{\circ}\;or\;16^{\circ}$ convergence angle were fabricated through milling and crowns with the same method. These dies and crowns were divided into 8 groups. Group 1 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 2 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 3 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 4 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 5 : $16^{\circ}$ taper die, cementation with Panavia 21, without loading Group 6 : $16^{\circ}$ taper die, cementation with Panavia 21, with loading Group 7 : $8^{\circ}$ taper die, cementation with Panavia 21 without loading Group 8 : $8^{\circ}$ taper die, cementation with Panavia 21, with loading After checking the fit of die and crown, the luting surface of dies and inner surface of crowns were air-abraded for 10 seconds. The crowns were cemented to the dies, with cements mixed according to the manufacturer's recommendations. A static load of 5kg was then applied for 10 minutes with static loading device. Twenty-four hours later, group 1, 3, 5, 7 were only thermocycled, group 2, 4, 6, 8 were subjected to cyclic loading after thermocycling. Retentive tests were performed on the Instron machine. From the finding of this study, the following conclusions were obtained 1. Panavia 21 showed significantly higher retentive strength than zinc phosphate cement for all groups (p<0.05). 2. There was a significant difference in the retentive strength between $8^{\circ}\;and\;16^{\circ}$ taper for zinc phosphate cement(p<0.05), but no significant difference for Panavia 21 (p>0.05). 3. Cyclic loading significantly decreased the retentive strength for all groups(p<0.05). 4. For zinc phosphate cement, there was 35% reduction of the retentive strength after loading in the $16^{\circ}$ taper die, 25% in the $8^{\circ}$ taper die, and for Panavia 21, 21% in the $16^{\circ}$ taper die, 18% in the $8^{\circ}$ taper die.

• Science of Emotion and Sensibility
• /
• v.13 no.1
• /
• pp.187-196
• /
• 2010

Recently, people have been suffering from stress-related fatigue and psychological disorders. Most people depend on medicine for pain relief; many treat pain also through alternative medicine or replacement therapy. However, drug therapy has many side effects, including increased stress after the therapy. In comparison, alternative therapies such as massage and foot reflexology are less damaging to the body, and such therapies can be provided without physical or psychological discomfort. In this regard, the author had previously co-developed color foot reflexology, which combines the merits of color therapy and foot reflexology; color foot reflexology has been shown to have beneficial effects without undue pain. This study investigates the effects of color foot reflexology on the physiological response of the body by comparing the body’s response to the signal with that to the placebo. Healthy adult subjects were selected for the experiment, which was conducted under optimal experimental conditions and design. The results indicated that when stimulated, parasympathetic nerves increased in HRV and that blood pressure, pulse, body heat, peripheral blood flow were dramatically activated. However, the results for the placebo indicated minimal changes or irregular outcomes. The results provide strong evidence for the beneficial effects of the color foot reflexology instrument on the autonomic nervous system and on the physiological response of the body. Future research is warranted to verify the results of the current study by examining patients suffering from diseases and disorders arising from irregular physiological functions in the context of the foot.

• Science of Emotion and Sensibility
• /
• v.16 no.1
• /
• pp.29-42
• /
• 2013

In this paper, we analyze the effect of the depth perception, volume perception and visual discomfort according to the change of the quality of the depth image and the depth of the major object. For the analysis, a 2D image was converted to eighteen 3D images using depth images generated based on the different depth position of a major object and background, which were represented in three detail levels. The subjective test was carried out using eighteen 3D images so that the degrees of the depth perception, volume perception and visual discomfort recognized by the subjects were investigated according to the change in the depth position of the major object and the quality of depth map. The absolute depth position of a major object and the relative depth difference between background and the major object were adjusted in three levels, respectively. The details of the depth map was also represented in three levels. Experimental results showed that the quality of the depth image differently affected the depth perception, volume perception and visual discomfort according to the absolute and relative depth position of the major object. In the case of the cardboard depth image, it severely damaged the volume perception regardless of the depth position of the major object. Especially, the depth perception was also more severely deteriorated by the cardboard depth image as the major object was located inside the screen than outside the screen. Furthermore, the subjects did not felt the difference of the depth perception, volume perception and visual comport from the 3D images generated by the detail depth map and by the rough depth map. As a result, it was analyzed that the excessively detail depth map was not necessary for enhancement of the stereoscopic perception in the 2D-to-3D conversion.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.7
• /
• pp.790-800
• /
• 2017

As men get older, total testosterone levels decline gradually, and concentrations of free and bioavailable testosterone decline sharply with each decade beyond their 30s. Andropause or testosterone deficiency syndrome (TDS) is defined as a decrease in sexual satisfaction or decline in general well-being accompanied by low levels of testosterone in older men. This male climacteric is characterized by nervousness, reduced potency, decreased libido, irritability, fatigue, depression, memory problems, sleep disturbances, and hot flushes. Cirsium japonicum (CJ) is used as a traditional medicine for hemorrhage, blood congestion, and inflammation in Korea. However, there is no report on the efficacy of CJ treatment for TDS. In this study, we observed the mitigating effect of CJ extract (CE) and fermented CJ extract (FCE) on symptoms of TDS. In elderly male rats, total and testosterone levels, hind limbs muscles, forced swimming time, and total and motile sperm counts significantly increased after daily intake of CE and FCE for 6 weeks. In contrast, sex hormone binding globulin, retroperitoneal fat, total serum cholesterol, and triglyceride levels were significantly reduced in CE and FCE groups. However, there was no difference in prostate specific antigen, aspartate aminotransferase, and alanine aminotransferase levels among all groups, which means CE and FCE did not have putative adverse effects. In a cell experiment, we also observed that CE and FCE enhanced expression of genes related to testosterone biosynthesis but reduced genes involved in testosterone conversion. On the whole, these positive effects on TDS were greater in FCE compared to CE. Thus, these results suggest the potential of FCE as a promising natural product for recovering testosterone levels and alleviating TDS.