• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.120-120
• /
• 2011

Graphene is a carbon based material and it has great potential of being utilized in various fields such as electronics, optics, and mechanics. In order to develop graphene-based logic systems, graphene field-effect transistor (GFET) has been extensively explored. GFET requires supporting devices, such as volatile memory, to function in an embedded logic system. As far as we understand, graphene has not been studied for volatile memory application, although several graphene non-volatile memories (GNVMs) have been reported. However, we think that these GNVM are unable to serve the logic system properly due to the very slow program/read speed. In this study, a GVM based on the GFET structure and using an engineered graphene channel is proposed. By manipulating the deposition condition, charge traps are introduced to graphene channel, which store charges temporarily, so as to enable volatile data storage for GFET. The proposed GVM shows satisfying performance in fast program/erase (P/E) and read speed. Moreover, this GVM has good compatibility with GFET in device fabrication process. This GVM can be designed to be dynamic random access memory (DRAM) in serving the logic systems application. We demonstrated GVM with the structure of FET. By manipulating the graphene synthesis process, we could engineer the charge trap density of graphene layer. In the range that our measurement system can support, we achieved a high performance of GVM in refresh (>10 ${\mu}s$) and retention time (~100 s). Because of high speed, when compared with other graphene based memory devices, GVM proposed in this study can be a strong contender for future electrical system applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.348-348
• /
• 2011

Carbon nanotube (CNT) field effect transistors and sensors use CNT as a current channel, of which the resistance varies with the gate voltage or upon molecule adsorption. Since the performance of CNT devices depends very much on the CNT/metal contact resistance, the CNT/electrode contact must be stable and the contact resistance must be small. Depending on the geometry of CNT/electrode contact, it can be categorized into the end-contact, embedded-contact (top-contact), and side-contact (bottom-contact). Because of difficulties in the sample preparation, the end-contact CNT device is seldom practiced. The embedded-contact in which CNT is embedded inside the electrode is desirable due to its rigidness and the low contact resistance. Fabrication of this structure is complicated, however, because each CNT has to be located under a high-resolution microscope and then the electrode is patterned by electron beam lithography. The side-contact is done by depositing CNT electrophoretically or by precipitating on the patterned electrode. Although this contact is fragile and the contact resistance is relatively high, the side-contact by far has been widely practiced because of its simple fabrication process. Here we introduce a simple method to embed CNT inside the electrode while taking advantage of the bottom-contact process. The idea is to utilize a eutectic material as an electrode, which melts at low temperature so that CNT is not damaged while annealing to melt the electrode to embed CNT. The lowering of CNT/Au contact resistance upon annealing at mild temperature has been reported, but the electrode in these studies did not melt and CNT laid on the surface of electrode even after annealing. In our experiment, we used a eutectic Au/Al film that melts at 250$^{\circ}C$. After depositing CNT on the electrode made of an Au/Al thin film, we annealed the sample at 250$^{\circ}C$ in air to induce eutectic melting. As a result, Au-Al alloy grains formed, under which the CNT was embedded to produce a rigid and low resistance contact. The embedded CNT contact was as strong as to tolerate the ultrasonic agitation for 90 s and the current-voltage measurement indicated that the contact resistance was lowered by a factor of 4. By performing standard fabrication process on this CNT-deposited substrate to add another pair of electrodes bridged by CNT in perpendicular direction, we could fabricate a CNT cross junction. Finally, we could conclude that the eutectic alloy electrode is valid for CNT sensors by examine the detection of Au ion which is spontaneously reduced to CNT surface. The device sustatined strong washing process and maintained its detection ability.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.5
• /
• pp.23-29
• /
• 2014

So far, the grouting using pressure injection has been extensively used to avoid adverse effects such as soil disturbance. Whereas, the pressure injection to the limitations of the diffusion range, so that the kinks would last injection of cement particles by introducing a frequency oscillation effect improved injection method have been recently developed. In this study, a pilot test was performed to compare injection effects of the both methods. The injections using both methods were tested on the embankment which consists of core clay and weathered soil. Subsequently, the injected volume, SPT N values, in-situ permeability and electrical resistivity were measured to compare their effects. The vibration method showed more effective permeation comparing with the pressure method. Also, it showed more homogeneously improved ground than the existing method. For SPT results, the vibration method presented increase of mean N value as much as 17.4 % comparing with the conventional method. Higher electrical resistivity was presented in case of injecting with vibration method and it indicated the injection was extensively completed. Finally, it is expected that the economic feasibility will be improved by decrease of drilling spacing, when the existing method is replaced with vibration method.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.2
• /
• pp.136-150
• /
• 2002

To improve the water quality of the recently constructed Siwhaho, sluice gates were operated to allow free exchange of water with the sea. This estuarine lake connected to the outer sea through narrow gates is affected mainly by flushing by gate operation and river flows and wind forcing sometimes. As a predicting tool far the water qualities, a three-dimensional finite volume model CE-QUAL-ICM is incorporated into a finite element hydrodynamic model, TIDE3D. In coupling these two different modules, a new error minimization technique is applied by considering conservation of mass. Model tests for one year after calibration and validation using field observation show that eutrophication and other biological changes reach quasi-steady state after initial 60 days of simulation, thus it would be necessary to consider moderate ramp up option to remove initial uncertainties due to cold start option. Sediment-water interaction might not be a concern in the long-term simulation, since its effect is negligible. Simulated results show the newly applied scheme can be applied with satisfaction not only fur lessening of eutrophic processes in an estuarine lake but also looking for some active circulation to improve water quality.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.559-563
• /
• 2015

Monitor of All-sky X-ray Image (MAXI) is a Japanese X-ray all-sky surveyer mounted on the International Space Station (ISS). It has been scanning the whole sky since 2009 during every 92-minute ISS rotation. X-ray transients are quickly found by the real-time nova-search program. As a result, MAXI has issued 133 Astronomer's Telegrams and 44 Gamma-ray burst Coordinated Networks so far. MAXI has discovered six new black holes (BH) in 4.5 years. Long-term behaviors of the MAXI BHs can be classified into two types by their outbursts; a fast-rise exponential-decay type and a fast-rise flat-top one. The slit camera is suitable for accumulating data over a long time. MAXI issued a 37-month catalog containing 500 sources above a ~0.6 mCrab detection limit at 4-10 keV in the region ${\mid}{b}{\mid}$ > $10^{\circ}$. The SSC instrument utilizing an X-ray CCD has detected diffuse soft X-rays extending over a large solid angle, such as the Cygnus super bubble. MAXI/SSC has also detcted a Ne emission line from the rapid soft X-ray nova MAXI J0158-744. The overall shapes of outbursts in Be X-ray binaries (BeXRB) are precisely observed with MAXI/GSC. BeXRB have two kinds of outbursts, a normal outburst and a giant one. The peak dates of the subsequent giant outbursts of A0535+26 repeated with a different period than the orbital one. The Be stellar disk is considered to either have a precession motion or a distorted shape. The long-term behaviors of low-mass X-ray binaries (LMXB) containing weakly magnetized neutron stars are investigated. Transient LMXBs (Aql X-1 and 4U 1608-52) repeated outbursts every 200-1000 days, which is understood by the limit-cycle of hydrogen ionization states in the outer accretion disk. A third state (very dim state) in Aql X-1 and 4U 1608-52 was interpreted as the propeller effect in the unified picture of LMXB. Cir X-1 is a peculiar source in the sense that its long-term behavior is not like typical LMXBs. The luminosity sometimes decreases suddenly at periastron. It might be explained by the stripping of the outer accretion disk by a clumpy stellar wind. MAXI observed 64 large flares from 22 active stars (RS CVns, dMe stars, Argol types, young stellar objects) over 4 years. The total energies are $10^{34}-10^{36}$ erg $s^{-1}$. Since MAXI can measure the spectrum (temperature and emission measure), we can estimate the size of the plasma and the magnetic fields. The size sometimes exceeds the size of the star. The magnetic field is in the range of 10-100 gauss, which is a typical value for solar flares.

• Journal of the Korean Society of Earth Science Education
• /
• v.14 no.2
• /
• pp.173-192
• /
• 2021

The purpose of this study is to analyze the previous research on geological fieldwork from 2000 to 2020, examine the tasks that have been focused on, and suggest directions and implications for future geological fieldwork research. The data was conducted for the thesis searched on ScienceON and RISS in relation to geological fieldwork and journals listed in the Korean Citation Index(KCI), and the study title was analyzed using the semantic network analysis. For analysis, the data that had been pre-processed was visualized as a network by semantic network analysis, and frequency and centrality were analyzed. The centrality analysis was based on degree centrality and eigenvector centrality, and all analyzes were performed by dividing the entire study period into four periods: 2000-2005, 2006-2010, 2011-2015, and 2016-2020. As a result, research on geological fieldwork focused more on the development of geological field courses, and in particular, jeju island was actively discussed as a learning site. Also, the study was conducted on students rather than teachers, and among them, high school students showed high frequency and centrality. In addition, it can be seen that studies on the educational effect of geological fieldwork were discussed, either in connection with programs such as STEAM, free-semester program, or indirect geological fieldwork methods such as web, flash panorama, and 3D. This study is meaningful in that it suggests the direction of future research by looking back on the research on geological fieldwork that has been done so far.

• Journal of Korean Elementary Science Education
• /
• v.40 no.2
• /
• pp.267-281
• /
• 2021

The purpose of this study was to investigate the effect of breeding experiences of companion animals on elementary school students' interest in science, science curiosity, and science self-concept in relation to companion animals that are rapidly increasing in modern society. To achieve the purpose of this study, level of four hundred and seventy-four 6th grade at elementary school students' interest in science, science curiosity, and science self-concept according to breeding experiences of companion animals were compared and analyzed through ANOVA and independent sample t-test. As a result of the analysis, students who have experience in raising companion animals have higher interest in science, science curiosity, and science self-concept than students who have no experience in raising companion animals. It is believed that students participate in breeding activities of companion animals with interest and curiosity, and that self-concept has increased due to the process of acquiring knowledge necessary to raise companion animals and successful breeding experiences. The results of this study are meaningful in that they discussed the implications of breeding experiences of companion animals for science education, using companion animals that have not been studied much in the field of science education so far.

• Journal of the Korea Institute of Construction Safety
• /
• v.3 no.1
• /
• pp.32-40
• /
• 2020

In this study, an application was developed to reduce the work between labor and safety managers and to hire better workers when hiring workers. With the expected increase in foreign workers in the future, the number of illegal workers will also increase. As a result, accident and on-site management are becoming more difficult due to insufficient information collection of workers. Therefore, it was possible to secure on-site safety through an application that could collect accurate information and reduce the time of information exchange between safety managers and labor managers. In addition, the application was designed to help the safety manager identify the faithful workers more quickly when re-employment of the day laborers if many day laborers were assessed and filled out as they were. This anticipates the expected effect of shortening the construction period. The current application collected necessary information through an interview with the site manager. If the company collects more information needed in the field and has big data than it has collected necessary information so far, it will be highly competitive in the market as it can improve the completeness of applications by establishing opinions and reflecting information accordingly.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.27 no.1
• /
• pp.25-35
• /
• 2023

Considering the non-linear behavior of structure and soil when evaluating a nuclear power plant's seismic safety under a beyond-design basis earthquake is essential. In order to obtain the nonlinear response of a nuclear power plant structure, a time-domain SSI analysis method that considers the nonlinearity of soil and structure and the nonlinear Soil-Structure Interaction (SSI) effect is necessary. The Boundary Reaction Method (BRM) is a time-domain SSI analysis method. The BRM can be applied effectively with a Perfectly Matched Layer (PML), which is an effective energy absorbing boundary condition. The BRM has a characteristic that the magnitude of the response in far-field soil increases as the boundary interface of the effective seismic load moves outward. In addition, the PML has poor absorption performance of low-frequency waves. For this reason, the accuracy of the low-frequency response may be degraded when analyzing the combination of the BRM and the PML. In this study, the accuracy of the analysis response was improved by adjusting the PML input parameters to improve this problem. The accuracy of the response was evaluated by using the analysis response using KIESSI-3D, a frequency domain SSI analysis program, as a reference solution. As a result of the analysis applying the optimal PML parameter, the average error rate of the acceleration response spectrum for 9 degrees of freedom of the structure was 3.40%, which was highly similar to the reference result. In addition, time-domain nonlinear SSI analysis was performed with the soil's nonlinearity to show this study's applicability. As a result of nonlinear SSI analysis, plastic deformation was concentrated in the soil around the foundation. The analysis results found that the analysis method combining BRM and PML can be effectively applied to the seismic response analysis of nuclear power plant structures.

• Korea Trade Review
• /
• v.42 no.4
• /
• pp.69-91
• /
• 2017

Since the global financial crisis, major countries have been executing policies related to two top-priority goals to create more jobs: revitalization of entrepreneur activity and the cultivation of small and medium-sized companies. In South Korea, the interest of policy makers is increasingly focusing on the role of SMEs that have a technological competitive edge in the realization of a "job-centered creative economy." Due to the nature of the field, the health and medical industry requires a particularly long time until the achievement of industrialization, Also, because of the complex distribution structure, it is essential for related government ministries and institutions to jointly devise strategies. A lack of policy supports for the industry has thus far resulted in its development being relegated for the most part of small and medium-sized companies, which consequently means low global competitiveness. Now is the time for the South Korean government to provide the revolutionary supported options and strategies. This study aims to propose a general policy direction and policy areas for the cultivation of Korea's small and medium-sized companies in the healthcare industry into global small giant companies through an exploration of the German case. It is crucial to first cultivate the international competitiveness of Korean small and medium-sized companies (as in the case of Germany) so that they can grow into global small giant companies. Another important task is the creation of an environment that expedites the qualitative growth of promising SMEs as well as technological development. After securing competitiveness in terms of both product quality and technology in the global health market, substantive policy supports will be necessary to cultivate global small giant companies that are export-based (e.g. job creation effect, sales value added).