• ETRI Journal
• /
• v.31 no.1
• /
• pp.68-70
• /
• 2009

In this letter, a parametric analysis of the Fresnel-field antenna measurement method is performed for a square aperture. As a result, the optimum number of Fresnel fields for one far-field point is guided as $M_{opt}=N_{opt}=D^2/{\lambda}R+5$, where D is the antenna diameter, ${\lambda}$ is the wavelength, and R is the distance between the source antenna and the antenna under test. For the aperture size 5 ${\leq}$ $L_x/{\lambda}$ ${\leq}$ 20, the tolerable distances for gain errors of 0.5 dB and 0.2 dB can be guided as $R_{0.5\;dB}$ ${\approx}$ $1.2Lx/{\lambda}$ and $R_{0.2\;dB}$ ${\approx}$ $2.0L_x/{\lambda}$, where $L_x$ is the lateral length of the square aperture. The tolerable distances for 20 ${\leq}$ $L_x/{\lambda}$ ${\leq}$ 200 are also proposed. This measurement guideline can be fully utilized when performing the Fresnel-field antenna measurement method.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.164-165
• /
• 2000

구멍에 의한 빛의 회절은 광학의 기본적인 문제로서, 최근 근접장 광학(Near-Field Optics)의 발전과 더불어서 파장보다 작은 구멍에서 일어나는 빛의 회절에 대한 관심이 고조되고 있다.$^{(1)(2)(3)}$ 본 연구에서는 그동안 주로 이론적으로 다루어지고 있던 파장보다 작은 금속 구멍을 통한 빛의 회절에 대해 실험결과들을 보고한다. 회절된 빛의 먼장(Far-field)과, 근접장(Near-field)을 모두 측정하기 위해서 고체각 주사기(Solid angle scanner)와 근접장 주사 광학 현미경(Near-field Scanning Optical Microscopy)이 사용되었다. 고체각 주사기(Solid angle scanner)를 사용하여 반구면 위에서의 빛의 이차원 세기 분포가 다양한 편광 상태에 따라서 측정되었고$^{(4)}$ 근접장 탐침(NSOM probe)으로 작은 금속 구멍주변을 주사함으로서 근접장이 측정되었다. 작은 구멍은 최근에 개발된 고출력 근접장 광섬유 탐침(High-power near-field fiber probe)구조를 이용하여 제작되었다.$^{(5)}$

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.158-159
• /
• 2000

광원의 근처에만 존재하는 근접장(Near-field)이 먼장(Far-field)과는 매우 다른 특성을 보인다는 것은 널리 알려진 사실이다. 일반적으로 먼장은 횡파(transverse wave)이며 광원에서 멀어질수록 1/r의 함수로 그 세기가 감소하는데 반하여, 근접장은 시간의존항을 제외하고는 정적인 분포를 보이고(static), 종파(logitudinal wave)성분이 오히려 크며 광원의 미세구조에 직접 관련되어 있다. 이러한 근접장이 근접장 주사 광학현미경(Near-field Scanning Optical Microscopy)의 발전으로 인해 실험적으로 연구되기 시작하면서 여러 가지 예기치 못한 현상들이 발견되고 있다. 그중 하나로서, 원편광된 빛(Circularly polarized light)을 내는 광원의 근접장을 측정한 실험에서 광원에 접근할수록 원편광이 사라지는 현상이 실험적으로 보고된바 있다.$^{(1)}$ 본 발표에서는 Bethe의 모델과 다중극 장(Multipole field)의 근접장을 분석하여 고전전자기론 내에서 근접장의 각 운동량에 대해 논의한다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.162-163
• /
• 2000

근접장 주사 광학 현미경(Near-field scanning optical microscope)에서 가장 중요한 부분은 바로 근접장 탐침(Near-field optical probe)이다. 가간 널리 사용되는 근접장 탐침은 끝 부분에 매우 작은 구멍만 남기고 나머지 부분은 금속으로 코팅한 뾰족한 광섬유(Metal-clad tapered optical fiber)이다. 탐침의 끝에 형성된 작은 구멍은 진행하지 못하는 근접장(Near-field)을 진행하는 먼장(Far-field)으로 바꾸어줌으로서 회절한계를 뛰어넘는 분해능을 가능하게 한다. 그러나, 이러한 작은 구멍은 매우 작은 투과 효율(Transmission efficiency)을 가지기 때문에 고밀도 광기록(High-density optical recording)등에 이용하는데 큰 어려움이 있었다.$^{(1).(3)}$ 따라서 금속이 코팅된 뾰족한 광섬유 내에서 빛이 어떻게 진행되는지에 대한 연구를 통해 보다 높은 효율을 가지는 근접장 탐침을 개발하는 것이 중요한 과제가 되고 있다. 본 연구에서는 금속이 코팅된 뾰족한 광섬유 도파로 내에서 구멍의 크기와 빛의 투과 효율의 관계를 보고한다. (중략)

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.4
• /
• pp.361-366
• /
• 2003

Most sensor array signal processing methods for multiple source localization require knowledge of the correct shape of array(the correct positions of sensors that consist array), because sensor position uncertainty can severely degrade the performance of array signal processing. In particular, it is assumed that the correct positions of the sensors are known, but the known positions may not represent the true sensor positions. Various algorithms have been proposed for 2-D sensor array shape calibration in far field environment. However, they are not available in near field. In this paper, 3-D sensor array shape calibration algorithm is proposed, which is available in near field.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.292-292
• /
• 2004

There are many difficulties to get the scattered field generated by obstacle which has arbitrary shape or irregular surface impedance by using analytic solution or numerical methods. In this study, we propose experimental method of acoustic scattering holography that can predict the far-field scattered field based on nearfield measurements. First of all, we express scattered field using K-H integral equation and compare the differences of which green's function we use. Also we consider analytic solution of scattered field by infinite cylinder to analysis for the errors due to apply cylinderical holography. So the errors which caused by holography due to frequency (ka) and microphone spacing are also analyzed by numerical simulation.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.4
• /
• pp.219-223
• /
• 2006

Near field recording(NFR) technology has been considered as a strong candidate to surpass the far-field diffraction limit imposed by the nature of light in present optical disk drives such as CD, DVD, and BD(Blu-ray Disk). In this paper, we suggest novel inside near-field dual layer recording concept using elliptic shape solid immersion lens(ESIL).

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.8
• /
• pp.733-739
• /
• 2005

Device Description that is described as C-based DDL(Device Description Language) should be provided for the control system to use the progressive function of field device in the distributed control system. DD expresses field device function itself and parameter. DD is used to set a necessary function far a control strategy in the central control system. DD technology which was adopted as international standard IEC 61804-Part 2 is being used in PROFIBUS, Foundation Fieldbus and HART. However, the DD is dependent to the fieldbus and it doesn't have a suitable form in the industrial Ethernet. This paper presents the possibility of a change from EDD(Electronic Device Description) and GSD(General Slave Data) used for integrating field devices to XDD(XML for Device Description) and verifies it's effectiveness. Also, this paper presents research assignment on the XML application in the distributional system from now on by examining the possibility of Ethernet`s development in the industrial area.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.278-288
• /
• 1998

An efficient and useful method to improve the local stress field in a displacement-formulated finite element solution has been proposed using the theory of conjugate approximations for a stress field and the Loubignac's iterative method for a displacement field. Validity of the proposed method has been tested through three test examples, to improve the stress field and displacement field in the whole domain and the local regions. As a result of analysis on the test examples, it is found that the stress field in the local regions are approximated to those in the whole domain within a few iterations which have satisfied the original finite element equilibrium equation. In addition, it is found that the local stress field are by far better approximated to the exact stress field than the displacement-based stress field with the reduction of the finite-element mesh-size.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.1995-2003
• /
• 2014

Power semiconductor devices have been the major backbone for high-power electronic devices. One of important parameters in view of power semiconductor devices often characterize with a high breakdown voltage. Therefore, many efforts have been made, since the development of the Insulated Gate Bipolar Transistor (IGBT), toward having higher level of breakdown voltage, whereby the typical design thereof is focused on the structure using the field ring. In this study, in an attempt to make up more optimized field-ring structure, the characteristics of the field ring were investigated with the use of theoretical arithmetic model and methodologically the design of experiments (DOE). In addition, the IGBT having the field-ring structure was designed via simulation based on the finding from the above, the result of which was also analyzed. Lastly, the current study described the trench field-ring structure taking advantages of trench-etching process having the improved field-ring structure, not as simple as the conventional one. As a result of the simulation, it was found that the improved trench field-ring structure leads to more desirable voltage divider than relying on the conventional field-ring structure.