• ETRI Journal
• /
• v.15 no.2
• /
• pp.1-9
• /
• 1993

Nitzberg has analyzed the detection performance of the clutter map constant false alarm rate (CFAR) detector using single pulse. In this paper, we extend the detection analysis to the clutter map CFAR detector that employs M-pulse noncoherent integration. Detection and false alarm probabilities for Swerling target models are derived. The analytical results show that the larger the number of integrated pulses M, the higher the detection probability. On the other hand, the analytical results for Swerling target models show that the detection performance of the completely decorrelated target signal is better than that of the completely correlated target.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2003.10a
• /
• pp.35-38
• /
• 2003

현재, 세계 여러나라에서 해상물표를 정확하게 탐지 및 검출하기 위한 방안으로 레이더 clutter 신호를 효과적으로 억제 및 제거하기 위한 연구가 활발하게 진행되고 있다. 일반적으로 레이더 반사파에 대한 envelope 신호의 진폭는 Rayleigh 분포에 따라 변동하는 특성을 나타내지만, clutter의 진폭분포의 파라 메터가 변동하여 분포형상이 변화하면, 오경보확률(false alarm probability)에도 변화가 발생하기 때문에 오경보확률을 충분히 낮은 일정치로써 억제시켜 일정오경보확률(constant false alarm rate, CFAR)을 유지하는 처리가 필요하다. (중략)

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.1
• /
• pp.51-57
• /
• 2010

This study was to analyze the difference in pilot error by using the Signal Detection Theory. The task was to detect the targeted aircraft(signal) which is different shape from many other aircraft(noise). From the two experiments, we differentiated the task difficulty followed by change in noise stimuli. Experiment 1 was to search the signal stimuli(fighter plane) while the noise stimuli(cargo plane) were increasing. The results from the Experiment 1 showed the tendency to decrease the hit rate by increasing the number of noise stimuli. However, the false alarm rate was not increased. The sensitivity(d') showed quite high. In Experiment 2, a disturbance stimulus(helicopter) was added to noise stimuli. The result was generally similar to those of Experiment 1. However, the hit rate was lower than that of Experiment 1.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1556-1564
• /
• 2001

Reed-Solomon code, block interleaving and SI (side information) are frequently used in SFH (slow frequency hopping) system. Erasing those symbols in the hit frequency slot greatly increases the error connection capacity. Packet error rate has been the major performance measure for SFH system. The analysis of BER has been limited to the case of perfect Sl, in which neither miss nor false alarm exists. BER with imperfect Sl has been obtained only by Monte Carlo simulation. In this paper, we present a unified solution to estimate BER with imperfect Sl. It is shown that previous formulae for packet error rate or BER with perfect Sl are special cases in the proposed solution. The computed BER with false alarm and miss of frequency hit is verified by comparing with the simulation result.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.307-314
• /
• 1999

The potential use of ranging sensors for reducing the occurrence of accidents in real environment is explored by many companies and laboratories. Most of the sensors under investigation utilize the FMCW(Frequency Modulated Continuous Wave) waveforms. The automotive environment presents to the FMCW radar sensor a multitude of moving and fixed targets and the sensor must detect and track only the targets which may pose a threat of collision or passengers accident. The sensor must function accurately in the presence of background echoes generated by moving and fixed targets, ground reflections, atmospheric noises, including rains, fog, and, snow and noise generated within the receiver. False detection of the desired target in this environment may issue false alarms. That may be dangerous to the passenger and the vehicle. A high false alarm rate is totally unacceptable. The false alarm mechanism consists of noise peaks, crossing the threshold and the undesired response of the system to off lane targets which are not potentially hazardous to the radar equipped vehicle. This paper presents an improve technique safety performance for driver-less operation using FMCW radar sensors.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1368-1370
• /
• 2000

The automotive environment presents to the FMCW radar sensor a multitude of moving and fixed targets and the sensor must detect and track only the targets which may pose a threat of collision or passengers accident. The sensor must function accurately in the presence of background echoes generated by moving and fixed targets, ground reflections, atmospheric noises, including rains, fog, and, snow and noise generated within the receiver. False detection of the desired target in this environment may issue false alarms. That may be dangerous to the passenger and the vehicle. A high false alarm rate is totally unacceptable. The false alarm mechanism consists of noise peaks, crossing the threshold and the undesired response of the system to off lane targets which are not potentially hazardous to the radar equipped vehicle. This paper presents an improve technique safety performance for driver-less operation using FMCW radar sensors.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.187-193
• /
• 2021

In order to solve the problem of false terrains caused by environmental interferences and tunneling effect in the conventional multi-beam seafloor terrain detection, this paper proposed a seafloor topography detection method based on fast two-dimensional (2D) Censored Mean Level Detector-statistics Constant False Alarm Rate (CMLD-CFAR) method. The proposed method uses s cross-sliding window. The target occlusion phenomenon that occurs in multi-target environments can be eliminated by censoring some of the large cells of the reference cells, while the remaining reference cells are used to calculate the local threshold. The conventional 2D CMLD-CFAR methods need to estimate the background clutter power level for every pixel, thus increasing the computational burden significantly. In order to overcome this limitation, the proposed method uses a fast algorithm to select the Regions of Interest (ROI) based on a global threshold, while the rest pixels are distinguished as clutter directly. The proposed method is verified by experiments with real multi-beam data. The results show that the proposed method can effectively solve the problem of false terrain in a multi-beam terrain survey and achieve a high detection accuracy.

• Korean Journal of Remote Sensing
• /
• v.31 no.2
• /
• pp.111-125
• /
• 2015

In this study, the target detection using both high-resolution satellite SAR and Elecro-Optical (EO) images such as TerraSAR-X and WorldView-2 is performed, considering the characteristics of targets. The targets of our interest are featured by being stationary and appearing as cluster targets. After the target detection of SAR image by using Constant False Alarm Rate (CFAR) algorithm, a series of processes is performed in order to reduce false alarms, including pixel clustering, network clustering and coherence analysis. We extend further our algorithm by adopting the fast and effective ellipse detection in EO image using randomized hough transform, which is significantly reducing the number of false alarms. The performance of proposed algorithm has been tested and analyzed on TerraSAR-X SAR and WordView-2 EO images. As a result, the average false alarm for group of targets is 1.8 groups/$64km^2$ and the false alarms of single target range from 0.03 to 0.3 targets/$km^2$. The results show that groups of targets are successfully identified with very low false alarms.

• Journal of electromagnetic engineering and science
• /
• v.19 no.2
• /
• pp.107-114
• /
• 2019

Alert-confirm detection is a highly efficient method to improve phased array radar search performance. It comprises sequential detection in two steps: alert detection, in which a target is detected at a low detection threshold, and confirm detection, which is triggered by alert detection with a longer dwell time to minimize false alarms. This paper provides a design method for applying the alert-confirm detection to multifunctional radars. We find optimum dwell times and false alarm probabilities for each alert detection and confirm detection under the dual constraints of total false alarm probability and maximum allowable dwell time per position. These optimum values are expressed as a function of the mean new target appearance rate. The proposed alert-confirm detection increases the maximum detection range even with a shorter frame time than that of uniform scanning.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.8
• /
• pp.577-581
• /
• 2009

Recently, various new services based on ubiquitous computing and networking have been developed. In this paper, we contrive Adaptive PIR(Pyroelectric Infrared Radiation) Detection Algorithm (APIDA), a PIR-sensor based digital signal processing algorithm, that detects the movement of an invading object by the recognition of heat change in the detection area, since the object like person or car emits heat(i.e., infrared radition), We devised APIDA as a highly reliable signal processing algorithm that increases the successful detection rate and decreases the false alarm rate in the intruding object detection. According to performance evaluation experiment, APIDA shows the successful detection rate of 90% and low false alarm in the plain area.