• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.3
• /
• pp.388-397
• /
• 2008

The present study was performed to evaluate the function of the mandible according to the pattern of fracture and treatment methods of condylar fractures of the mandible and help operators in making a treatment plan. Sixty patients (average follow-up period was $7.8{\pm}9.4$ months) who were treated for condylar fracture from June, 2002 to May, 2006 at the Department of Oral and Maxillofacial surgery, Chonnam National University Hospital were reviewed. The common causes of the condylar fracture were traffic accident and fall-down (35.0%). In concomitant injuries, laceration was 46.7% and the fracture of the mandibular symphysis was highest incidence (60.0%). The common site of the fracture was the condylar head (47.8%), followed by subcondyle (36.2%) and condylar neck (15.9%). Under 15 years old patients, the closed reduction was performed in 87.5% out of the patients. All of the condylar fragments were fixed to the mandible with titanium miniplates in cases of open reduction. The mean period of intermaxillary fixation (IMF) was $14.2{\pm}6.5$ days in closed reduction and $10.0{\pm}4.2$ days in open reduction. The old patient with bilateral condylar head fractures, who were treated by closed reduction with IMF for 3 weeks, showed the limitation of mandibular movements. But, there was no significant different results between open reduction and closed reduction with the respect of the Helkimo's mandibular mobility index and clinical dysfunction index (DI). Complications, such as fibrous ankylosis and resorption of the mandibular condyle, were not observed in all patients. These results suggest that the good results can be obtained by closed reduction with proper IMF periods and functional exercise in most condylar fractures of the mandible except severely displaced extracapsular fractures.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.4
• /
• pp.419-427
• /
• 1994

Because of the prominence of the nose and its central location, it is the most frequently encountered fractures in the face. Yet reports about the nasal bone fractures are virtually rare in the oral and maxillofacial surgical literatures. This is a retrospective study on 19 nasal bone fractures treated in Chosun university hospital Department of Oral & Maxillofacial Surgery from Jan. 1991 to Sep. 1993, under admission to our Dept. and the obtained results were as follows. 1. Of the 240 patients with facial bone fractures, 28 patients suffered nasal fractures(12%) and male to female ratio was 5.3:1. 2. The most frequent cause was traffic accidents(39%)m, the next fall down(36%), first blow(4%). 3. The age frequency was the highest in the fifth decade (32%). 4. Clinical classification of nasal fractures was simple fractures(74%), combined fractures(26%), and single fractures(37%), combined fractures(63%). 5. The most frequently combined site was maxilla(50%). 6. Treatments of nasal fractures were closed reduction(63%), open reduction(5%), and secondary rhinoplasty(32%). 7. The initial treatment time from accident was 1.7 days in single fractures, and 3.5 days in combined fractures, and the period of splint retained was about 8.2 days in single fracture, about 8.7 in combined fracture. 8. It was necessary to treat secondarily in delayed treatment, and all treatment methods showed relatively good prognosis. 9. Closed reduction was treated under local anesthesia, but open reduction & secondary rhinoplasty was treated under general anesthesia except 1 case. 10. The complications were disturbance of swellings 5 cases, ethetic problem 5 cases, epiphora 3 cases, abnormal sensation 6 cases in relation with other fractures.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.3
• /
• pp.135-139
• /
• 2014

This following case report describes the open reduction, internal fixation and the reconstruction of an extensive comminuted mandibular fracture with bilateral condylar fractures in a 19-year-old male patient with an intellectual disability and autistic disorder. He suffered fall trauma, resulting in shattered bony fragments of the alveolus and mandibular body between both mandibular rami, the fracture of both condyles and the avulsion or dislocation of every posterior tooth of the mandible. The patient underwent open reduction and internal fixation between both mandibular rami using a reconstruction plate, open reduction and internal fixation of the shattered fragments using miniplates and screws, and the closed reduction of the bilateral condylar fractures.

• The Korean Journal of Physiology and Pharmacology
• /
• v.3 no.5
• /
• pp.513-519
• /
• 1999

Direct exposure of renal tubular brush-border membranes (BBM) to free cadmium (Cd) causes a reduction in phosphate (Pi) transport capacity. Biochemical mechanism of this reduction was investigated in the present study. Renal proximal tubular brush-border membrane vesicles (BBMV) were isolated from rabbit kidney outer cortex by Mg precipitation method. Vesicles were exposed to $50{\sim}200\;{\mu}M\;CdCl_2$ for 30 min, then the phosphate transporter activity was determined. The range of Cd concentration employed in this study was comparable to that of the unbound Cd documented in renal cortical tissues of Cd-exposed animals at the time of onset of renal dysfunction. The rate of sodium-dependent phosphate transport $(Na^+-Pi\;cotransport)$ by BBMV was determined by $^{32}P-Iabeled$ inorganic phosphate uptake, and the number of $Na^+-Pi$ cotransporters in the BBM was assessed by Pi-protectable $^{14}C-labeled$ phosphonoformic acid $([^{14}C]PFA)$ binding. The exposure of BBMV to Cd decreased the $Na^+-Pi$ cotransport activity in proportion to the Cd concentration in the preincubation medium, but it showed no apparent effect on the Pi-protectable PFA binding. These results indicate that an interaction of renal BBM with free Cd induces a reduction in $Na^+-Pi$ cotransport activity without altering the carrier density in the membrane. This, in turn, suggest that the suppression of phosphate transport capacity $(V_{max})$ observed in Cd-treated renal BBM is due to a reduction in $Na^+-Pi$ translocation by existing carriers, possibly by Cd-induced fall in membrane fluidity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12A
• /
• pp.1339-1345
• /
• 2007

An important drawback in Lattice Reduction (LR) aided detectors has been investigated. For the solution, an improved LR aided detection with ignorable complexity overhead is proposed for MIMO system, where the additional correction operation is performed for the case of unreliable symbol decision. We found that LR aided detection errors mainly occur when the lattice points after the inverse lattice transform in the final step fall outside the constellation point set. In the proposed scheme, we check whether or not the lattice point obtained through LR detection is out of constellation. Only for the case of out of constellation, we additionally perform ML search with reduced search region restricted to the neighboring points near to the obtained lattice points. Using this approach, we can effectively and significantly improve the detection performance with just a slight complexity overhead which is negligible compared to full searched ML scheme. Simulation results show that the proposed scheme achieves the detection performance near to that of the ML detection with a lower computational complexity.

• Journal of Bio-Environment Control
• /
• v.3 no.1
• /
• pp.1-9
• /
• 1994

Wind load or snow load, acting on agricultural structures is working more sensitive than any other load and therefore plays an important role in determination of design loads of agricultural structures. In this study, unit snow weight, greatest gust speed and depth of snow fall were analyzed and applied to determine the amount of frames. The unit snow weights were statistically classified and calculated in the basis of mean temperature and showed considerable differences between the unit snow weights at below and above -1$^{\circ}C$. Equations for estimating greatest gust speed with fastest wind speed were developed for inland and seaside districts. The calculated values from developed equations were little higher than those from the current equation in general. The difference between the depths of snow cover and snow fall, which shows the possibility of reduction of design loads under the adequate management. Design wind speed estimated by a modified equation suggested the amount of frames less than those by current one, and the depth of snow fall as a design snow depth suggested the amount of frames more than those of snow cover. Therefore, it is very important to select the adequate design values considering the characteristics of agricultural structures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.597-602
• /
• 2021

Even in the era of the 4th industrial revolution, the prevention of industrial accidents is still an important issue in industrial sites. In solving the problem of industrial safety, a product can be difficult to market if there is a lack of standard or method for a reliable performance evaluation. The purpose of this study was to develop and evaluate a test method for a wearable airbag product for protecting the body from falls that was newly developed to respond to fall accidents in industrial sites. As a research method, reliable evaluation standards were developed and applied through four stages of the evaluation and development process (Step 1: Product review, Step 2: Data research, Step 3: Expert meeting, Step 4: Drawing evaluation standard). In addition, the impact force was evaluated according to the developed evaluation standard. The fall impact force obtained through the evaluation showed a reduction effect of approximately 96% compared to the existing impact force. Therefore, the fall impact force was reduced significantly when the airbag was applied. This will enable new convergence products to be launched on the market and produce an environment where industrial workers can work safely.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.27-30
• /
• 2003

The introduction of reseller In Australian Fixed Telecommunication Market resulted in the reduction of Telstra's local call market share by 13 percent and average fall rate was reduced. Thus, Telstra increased basic rate at 14.5 percent to compensate loss revenue in the local call market. With the deployment of carrier pre-selection of long distance and international calls, it reduced long distance rate at 23.5 percent and international tall rate at 53 percent, and increased the Churn rate. Therefore, the deployment of service-based competition brought efficient results for long distance and international call market. However, LM market created 13.4 percent reduction in call rates, complications in charge system, technical barriers and the preference of one-bill by customers.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.769-772
• /
• 2010

The objective of the current research work is to investigate the usage of biodiesel combined with the use of EGR in order to reduce the emission of all regulated pollutants from diesel engines. A single cylinder, air cooled, constant speed direct injection diesel engine was used for the experimental work and a cold EGR system was developed and fitted to the engine. Concentrations of HCs, NOx, and CO from the exhaust gas along with the smoke opacity were measured. Engine performance parameters such as the brake thermal efficiency (BTE) and the brake specific energy consumption (BSEC) were also calculated from the measured data. The results from the present investigation suggest that 25-30% EGR rate could give excellent NOx reduction without any significance penalty on smoke opacity or BSEC under the engine load of up to 40%. Under the full load condition, 15% EGR rate was found to be an option while higher EGR rate resulted in inferior performance and heavy smoke.

• Environmental and Resource Economics Review
• /
• v.10 no.2
• /
• pp.135-159
• /
• 2001

This study analyses the energy consumption increase by using a physical production index (PPI) based decomposition method. The energy efficiency of the Korean industry deteriorated to a large extent in the 1992 to 1997 period. This outcome, however, does not contradict the result of a previous study that the physical energy intensities (measured by energy use per production unit) decreased in four Korean energy intensive industries such as steel, cement, petrochemical and pulp and paper in the same period. Although the physical energy intensities in four industries considered decreased significantly, the energy efficiency of the Korean industry deteriorated because the increase in the value-added production was smaller than that in the physical production except for the steel industry. This outcome suggests that the reduction in the physical energy intensity alone will not result in reducing the economic energy intensity, thereby reducing the increase in the energy consumption of the Korean industry. Therefore, it necessitates to restructure the Korean industry towards a higher value-added production and to strengthen energy efficiency improvement efforts in the Korean industry. As the overinvestment in the energy intensive industries caused a deep price fall of Korean products and a reduction of the value added of the Korean industry and with it an increase in the economic energy intensity, a decrease in this intensity will highly depend on reducing the overcapacity in the energy intensive industries which was partly responsible for the currency and economic crisis of 1997.