• 한국정밀공학회지
• /
• 제18권1호
• /
• pp.111-116
• /
• 2001

A practical scheme to reduce failure of the PCB(Printed Circuit Board) of a monitor is introduced using deformed mode shape under mechanical shock. When the monitor is given critical shock loads, cracks are commonly initiated at the tip of a hole on the PCB. Accordingly, a deformed mode shape of the PCB is obtained using a FEM code to define a weak point on the PCB under mechanical shock, and then the position and direction of the hole is determined to prevent the failure at the critical mode shape. Also, the stress intensity factor around the weak point on the PCB is calculated to check the possibility of fracture by normal tensile stress. In conclusion, present research is useful to assist the practical design of components-layout on the PCB.

• Structural Engineering and Mechanics
• /
• 제88권4호
• /
• pp.369-377
• /
• 2023

In this study, previously developed algorithm is used for Optimization of hybrid composite plates using Tsai-Wu criteria. For the stress-based Design Optimization problems, Von-Mises stress uses as design variable for isotropic materials. Maximum stress, maximum strain, Tsai Hill, and Tsai-Wu criteria are generally used to determine failure of composite materials. In this study, failure index value is used as design variable in the optimization algorithm and Tsai-Wu criteria is utilized to calculate this value. In the analyses, commonly used design domains according to different hybrid orientations are optimized and results are presented. When the optimization algorithm was applied, 50% material reduction was obtained without exceeding allowable failure index value.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.873-876
• /
• 2002

This paper presents the effect of internal corrosion, external corrosion, material properties, operation condition, earthquake, traffic load and design thickness in pipeline on the failure prediction using a failure probability model. A nonlinear corrosion is used to represent the loss of pipe wall thickness with time. The effects of environmental, operational, and design random variables such as a pipe diameter, earthquake, fluid pressure, a corrosion rate, a material yield stress and a pipe thickness on the failure probability are systematically investigated using a failure probability model for the corrosion pipeline.

• 대한산업공학회지
• /
• 제20권1호
• /
• pp.39-51
• /
• 1994

Almost all accelerated life tests assume that no basic failure mechanism changes within the test stresses. But accelerated life test, considering failure mechanism changes, is needed since failure mechanism changes when accelerating beyond the used stress. This paper studies the analysis when the failure mechanism changes within the test stresses. The piecewise linear regression, which the join point of two lines is estimated, is applied In particular, two accelerated life tests, with and without a change in failure mechanism are examined.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2002년도 정기학술대회
• /
• pp.403-410
• /
• 2002

This paper presents the effect of internal corrosion, external corrosion, material properties, operation condition, earthquake, traffic load and design thickness in pipeline on the failure prediction using a failure probability model. A nonlinear corrosion is used to represent the loss of pipe wall thickness with time. The effects of environmental, operational, and design random variables such as a pipe diameter, earthquake, fluid pressure, a corrosion rate, a material yield stress and a pipe thickness on the failure probability are systematically investigated using a failure probability model for the corrosion pipeline.

• 터널과지하공간
• /
• 제15권2호
• /
• pp.157-167
• /
• 2005

암반 내 작용하는 초기응력은 굴착되는 공동의 안정성이나 파괴 거동을 평가하는데 요구되는 주요 매개변수들 중의 하나이며 그 중요성은 암반 구조물의 시공 심도가 깊어지고 단면 규모가 커질수록 증가하게 된다. 이 논문에서는 경기육괴의 동북부에 위치한 춘천-양구 산악지역의 초기응력 분포 특성을 파악하기 위한 연구를 수행하였다. 현장 초기응력 측정은 연구지역내 9개 개별 시추공을 대상으로 심도 220m\~290m 구간의 49개소에서 시행되었다. 모든 수압파쇄 균열 조사는 초음파 주사검층을 이용하여 수행하였다. 연구 결과 조사지역 내에서 분포 암종의 차이에 따라 서로 상이한 분포 특성을 나타내는 초기응력장이 관찰되었고 특히 심도 200 m 이상의 관입 화강암체내에는 3.0에 가까운 측압계수를 가지는 높은 수준의 과잉 수평응력장이 형성되어 있는 것으로 분석되었다. 그리고 조사지역내에서 초기응력 조건에 의한 취성파괴 가능성을 평가한 결과 화강암 분포 지역내 심도 100 m이상인 영역에서는 굴착된 암반 구조물 주변에서 취성파괴의 가능성이 있는 것으로 분석되었다.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.122-129
• /
• 2004

There is an increasing need for large flat panel display devices. PDP (Plasma Display Panel) is one of the most promising candidates for this need. Thermal shock failure of PDP glass during manufacturing process is a critical issue in PDP industry since it is closely related to the product yield and the production speed. In this study, thermal shock resistance of PDP glass is measured by water quenching test and an analysis scheme is described for estimating transient temperature and stress distributions during thermal shock. Based on the experimental data and the analysis results, a simple procedure for predicting the thermal shock failure of PDP glass is proposed. The fast cooling process for heated glass plates can accelerate the speed of PDP production, but often leads to thermal shock failure of the glass plates. Therefore, a design guideline for preventing the failure is presented from a viewpoint of high speed PDP manufacturing process. This design guideline can be used for PDP process design and thermal -shock failure prevention.

• 대한기계학회논문집A
• /
• 제31권3호
• /
• pp.304-312
• /
• 2007

The objective of this study is to develop a local failure criterion for a wall thinning defect of piping components. For this purpose, a series of tensile tests was performed using several types of simulated specimens with different stress states, including smooth round bar, notched round bar (five different notch radii), and grooved plate (three different groove radii). In addition, finite element (FE) simulations were performed on the simulated specimen tests and the results were compared with the test results. From the comparisons, the equivalent stress and strain corresponding to maximum load and final failure of notched specimens were proposed as failure criteria under tensile load. The criteria were verified by employing them to the estimation of failure of grooved plate specimens that simulate the wall thinning defect. It showed that the proposed criteria accurately estimate the maximum load and final failure of grooved plate specimen tests.

• 터널과지하공간
• /
• 제19권2호
• /
• pp.95-106
• /
• 2009

암석파괴역학과 파괴인성 이하의 응력상태에서 균열이 발생하고 성장하는 특성을 고려하여 암반사면의 진행성 파괴를 검토하였다. 굴착이 종료된 암반사면은 응력이 거의 변하지 않은 조건이지만, 시간이 경과함에 따라 절리면 내 미소한 접점에서 파괴가 발생하고 파괴된 접점의 수효가 증가함에 따라 절리면이 파괴되고, 파괴된 절리면이 많아져 사면이 파괴되는 진행성파괴 현상을 수치해석적으로 확인하였다. 따라서 암반사면의 진행성 파괴는 파괴인성보다 낮은 응력상태에 있는 암반 절리면 내 미소한 접점에서 시간의 경과에 따라 발생한 균열이 성장하여 사면을 파괴시키는 것으로 분석되었다.

• Steel and Composite Structures
• /
• 제18권5호
• /
• pp.1291-1303
• /
• 2015

Damage caused by low velocity impact is so dangerous in composites because although in most cases it is not visible to the eye, it can greatly reduce the strength of the composite material. In this paper, damage development in U-section glass/polyester pultruded beams subjected to low velocity impact was considered. Different failure criteria such as Maximum stress, Maximum strain, Hou, Hashin and the combination of Maximum strain criteria for fiber failure and Hou criteria for matrix failure were programmed and implemented in ABAQUS software via a user subroutine VUMAT. A suitable degradation model was also considered for reducing material constants due to damage. Experimental tests, which performed to validate numerical results, showed that Hashin and Hou failure criteria have better accuracy in predicting force-time history than the other three criteria. However, maximum stress and Hashin failure criteria had the best prediction for damage area, in comparison with the other three criteria. Finally in order to compare numerical model with the experimental results in terms of extent of damage, bending test was performed after impact and the behavior of the beam was considered.