• Transactions on Electrical and Electronic Materials
• /
• v.9 no.4
• /
• pp.143-146
• /
• 2008

In this study the thermal impact characteristics by forest fire are extensively investigated using temperature controlled ovens. The test conditions for thermal impact damage are simulated according to the characteristics of natural forest fire. The test pieces are suspension porcelain insulators made by KRI in 2005 for transmission lines. In the thermal impact cycle tests with $300\;^{\circ}C$ thermal impact gradient (-70 to $230\;^{\circ}C$), cycling in 10 minute periods, no critical failures occurred in the test samples even with long cycle times. But in tests with thermal impact gradient from room temperature to $200-600\;^{\circ}C$, cycling in 10 to 30 minute periods, there were critical failures of the porcelain insulators according to the thermal impact gradient and quenching method. In the case of thermal impact by forest fire, it was found of that duration time is more important than the cycling time, and the initiation temperature of porcelain insulator failures is about $300\;^{\circ}C$, in the case of water quenching, many cracks and fracture of the porcelain occurred. It was found that the thermal impact failure is closely related to the displacement in the cement by thermal stress as confirmed by simulation. It was estimated that the initiation displacement by the thermal impact of $300\;^{\circ}C$ is about 0.1 %. Above 1% displacement, it is expected that the most porcelain insulators would fail.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.7-15
• /
• 2017

Recently, an electricity sensor system has been installed and operated to prevent failures and accidents by identifying whether a transformer is normal in advance of failure. This electricity sensor system is able to both measure and monitor the transformer's power and voltage remotely and send information to a manager when unusual operation is discovered. However, a battery is required to operate power detection devices, and battery systems need ongoing management such as regular replacement. In addition, at a maintenance cost, occasional human resources and worker safety problems arise. Accordingly, we apply a linear electromagnetic generator using vibration energy from a transformer for an electric sensor system's drive in this research and we conduct optimal design to maximize the linear electromagnetic generator's power. We consider design variables using the provided design method from Process Integration, Automation, and Optimization (PIAnO), which is common tool from process integration and design optimization (PIDO). In addition, we analyze the experiment point from the design of the experiments using "MAXWELL," which is a common electromagnet analysis program. We then create an approximate model and conduct accuracy verification. Finally, we determine the optimal model that generates the maximum power using the proven approximate kriging model and evolutionary optimization algorithm, which we then confirm via simulation.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.5
• /
• pp.563-571
• /
• 2012

In 3D integration package using TSV technology, bonding is the core technology for stacking and interconnecting the chips or wafers. During bonding process, however, warpage and high stress are introduced, and will lead to the misalignment problem between two chips being bonded and failure of the chips. In this paper, a finite element approach is used to predict the warpages and stresses during the bonding process. In particular, in-plane deformation which directly affects the bonding misalignment is closely analyzed. Three types of bonding technology, which are Sn-Ag solder bonding, Cu-Cu direct bonding and SiO2 direct bonding, are compared. Numerical analysis indicates that warpage and stress are accumulated and become larger for each bonding step. In-plane deformation is much larger than out-of-plane deformation during bonding process. Cu-Cu bonding shows the largest warpage, while SiO2 direct bonding shows the smallest warpage. For stress, Sn-Ag solder bonding shows the largest stress, while Cu-Cu bonding shows the smallest. The stress is mainly concentrated at the interface between the via hole and silicon chip or via hole and bonding area. Misalignment induced during Cu-Cu and Sn-Ag solder bonding is equal to or larger than the size of via diameter, therefore should be reduced by lowering bonding temperature and proper selection of package materials.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.424-434
• /
• 2017

In industrial wireless sensor networks, many applications require integrated QoS supporting. This paper proposes a reliable protocol for real-time monitoring in industrial wireless sensor networks. Retransmission is well-known to recover the transmission failure, however, this might cause the time delay to violate the real-time requirement. The proposed protocol exploits broadcasting feature of wireless networks and the temporal opportunity concept. The opportunities to relay the data packets are shared by the broadcasting feature and the temporal opportunity concept maximize the number of candidates in communication. Simulation results show that the proposed protocol is superior to the existing real-time protocols in term of real-time service and reliability.

• KIISE Transactions on Computing Practices
• /
• v.20 no.12
• /
• pp.694-699
• /
• 2014

In mobile ad-hoc networks (MANET), the network topology and neighboring nodes change frequently, since MANET is composed of nodes that have mobility without a fixed network infrastructure. The AODV routing protocol is advantageous for MANET, but AODV has a delay in the transmission of data packets because AODV can not transmit data during route recovery. This paper proposes solving the above problem of AODV by using a bypass generation mechanism for data transmission during route recovery. For further improvement, additional mechanisms that coordinate the reception threshold of a hello packet are proposed in order to improve the accuracy of the information obtained from the neighboring nodes when the bypass is generated due to a link failure and the immediacy of the route recovery. Simulation results show that the proposed technique improves the performance in terms of the delay in transmission compared to traditional AODV.

• Coupled systems mechanics
• /
• v.1 no.4
• /
• pp.381-395
• /
• 2012

Dynamic response of Pile Supported Structures is highly depended on Soil Pile Structure Interaction. In this paper, by comparison of experimental and numerical dynamic responses of a prototype jacket offshore platform for both hinge based and pile supported boundary conditions, effect of soil-pile-structure interaction on dynamic characteristics of this platform is studied. Jacket and deck of a prototype platform is installed on a hinge-based case first and then platform is installed on eight skirt piles embedded on continuum monolayer sand. Dynamic characteristics of platform in term of natural frequencies, mode shapes and modal damping are compared for both cases. Effects of adding and removing vertical bracing members in top bay of jacket on dynamic characteristics of platform for both boundary conditions are also studied. Numerical simulation of responses for the studied platform is also performed for both mentioned cases using capability of ABAQUS and SACS software. The 3D model using ABAQUS software is created using solid elements for soil and beam elements for jacket, deck and pile members. Mohr-Coulomb failure criterion and pile-soil interface element are used for considering nonlinear pile soil structure interaction. Simplified modeling of soil-pile-structure interaction effect is also studied using SACS software. It is observed that dynamic characteristics of the system changes significantly due to soil-pile-structure interaction. Meanwhile, both of complex and simplified (ABAQUS and SACS, respectively) models can predict this effect accurately for such platforms subjected to dynamic loading in small range of deformation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.3
• /
• pp.63-70
• /
• 2018

In this study, a simple probabilistic approach using equivalent coefficient of consolidation ($c_e$) was proposed to consider the spatial variability of coefficient of vertical consolidation ($c_v$), and the effect of the probability distribution of coefficient of consolidation on degree of consolidation in heterogeneous soil was investigated. The statistical characteristics of consolidation coefficient were estimated from 1,226 field data, and four probability distributions (Normal, Log-normal, Gamma, and Weibull) were applied to consider the effect of probability distribution. The random fields of coefficient of consolidation were generated based on Karhunen-Loeve expansion. Then, the equivalent coefficient of consolidation was calculated from the random field and used as the input value of consolidation analysis. As a result, the probabilistic analysis can be performed effectively by separating random field and numerical analysis, and probabilistic analysis was performed using a Latin hypercube Monte Carlo simulation. The results showed that the statistical properties of $c_e$ were changed by the probability distribution and spatial variability of $c_v$, and the probability distribution of $c_v$ has considerable effects on the probabilistic results. There was a large difference of failure probability depend on the probability distribution when the autocorrelation distance was small (i.e., highly heterogeneous soil). Therefore, the selection of a suitable probability distribution of $c_v$ is very important for reliable probabilistic analysis of consolidation.

• Journal of KIISE:Information Networking
• /
• v.27 no.2
• /
• pp.187-196
• /
• 2000

Failures in ATM networks can occur at virtual path (VP) links, virtual path switches, and virtual channel (VC) switches. Restoration schemes have been proposed for VP link and VP switch failures, however, none for VC switch failures. In general, VC switches are used for edge nodes in protection domains. Since even only one VC switch failure can cause a critical problem, new restoration schemes for VC switch failures are highly required. Restoration schemes at the VP level proposed so far can be categorized into those using the flooding algorithm and those using the backup virtual path (BVP) concept. Even though the latter cannot handle unpredictable failures, it has some advantages such as fast restoration and low spare capacity requirement. In this paper, we propose new restoration schemes using a new type of BVPs to handle VC switch failures. The simulation results show that the proposed schemes can restore virtual connection failures due to VC switch failures without degrading restorability for VP failures.

• International Journal of Contents
• /
• v.12 no.1
• /
• pp.25-43
• /
• 2016

An agent-centric event planning method is proposed for providing pedagogical experiences in an immersed environment. Two-level planning is required at in a macro-level (i.e., inter-event level) and an intra-event level to provide realistic experiences with the objective of learning declarative knowledge. The inter-event (horizontal) planning is based on search, while intra-event (vertical) planning is based on hierarchical decomposition. The horizontal search is dictated by several realistic types of association between events besides the conventional causality. The resulting schematic plan is further augmented by conditions associated with those agents cast into the roles of the events identified in the plan. Rather than following a main story plot, all the events potentially relevant to accomplishing an initial goal are derived in the final result of our planning. These derived events may progress concurrently or digress toward a new main goal replacing the current goal or event, and the plan could be merged or fragmented according to their respective lead agents' intentions and other conditions. The macro-level coherence across interconnected events is established via their common background world existing a priori. As the pivotal source of event concurrency and intricacy, agents are modeled to not only be autonomous but also independent, i.e., entities with their own beliefs and goals (and subsequent plans) in their respective parts of the world. Additional problems our method addresses for augmenting pedagogical experiences include casting of agents into roles based on their availability, subcontracting of subsidiary events, and failure of multi-agent event entailing fragmentation of a plan. The described planning method was demonstrated by monitoring implementation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.115-126
• /
• 2006

The purpose of this study is to develop an urban inundation model using GIS(geographic information system). The model is combining a storm sewer system model and a overland-flow model for the estimation inundation depth in urban area caused by the surcharge of storm sewers. SWMM(storm water management model) was employed to resolve the storm sewer flow and to provide the overflow hydrographs caused by the failure of a drainage system due to the shortage of drainage capacity. The level-pool overland-flow model and DEM based overland-flow model were used to calculate the detail inundation zones and depths due to the surcharge on overland surface. The simulation results can help the decision preventing flood damages by redesigning and enlarging the capacities of storm sewer systems in the inundation-prone areas. The model can also be applied to make the potential inundation area map and establish flood-mitigation measures as a part of the decision support system for flood control authority.