• Korean Journal of Soil Science and Fertilizer
• /
• 제30권4호
• /
• pp.377-383
• /
• 1997

Studies were conducted on the nature of allelopathic effect of the substances in the waste of ginkgo leaves from pharmaceutic factory. In the first step, to find out whether there was any allelophatic effect, young seedlings of radish and rice were grown in the water (crude) extract of ginkgo leaf waste and in different liquid/lquid partitioned fractions of EtOAc at pH 9, EtOAc at pH 3, and BuOH. As second step, attempts were made to isolate and identify the allelophatic substance in different liquid/liquid partitioned fractions using GC/MS and NMR techniques. The water (crude) extract of ginkgo leaf waste retarded the growth of radish seedlings under 10% concentration. In case of rice seedlings, the water extract of ginkgo leaf extract showed adverse effect on the growth when combined with $3.3{\times}10^{-6}M$ gibberellin A3. All of the liquid/liquid fractions of crude extract showed strong retardation of seedling growth of radish and rice at the concentration of 1%. Allelophatic substance was isolated from the crude extract using liquid/liquid partition, column chromatography and HPLC techniques. The analytical results of isolated componet using GC/MS and NMR proved that the allelophatic substance in the ginkgo leaf wastes is catechol; one of phenol compounds. Based on the experiences current study, a practical method for the testing of allelophatic effect of crude extract of some materials was proposed. In this method, rice seeds were allowed to sprout until the length of coleoptile to reach 0.5 mm. Such seedlings were submerged in the solution containing supposedly allelophatic substance and the length of shoot and root was measured 3 days after treatment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제17권11호
• /
• pp.51-56
• /
• 2016

In this paper, we propose an Arduino-based plant monitoring system. The proposed system is based on the Arduino platform, using an environmental sensor and a pressure sensor for measuring temperature, humidity and illuminance in order to monitor the state of the environment and the facilities of the plant. Monitoring data are transmitted to a ZigBee coordinator connected to a server through a radio frequency transceiver. When using a pressure sensor and the environment sensor data stored on the host server, checking the pressure in the environment of the plant and equipment is intended to report any alarm status to the administrator. Using a grid line-based key distribution scheme, the authentication node dynamically generates a data key to protect the monitoring information. Applying a ZigBee wireless sensor network does not require additional wiring for the actual implementation of a plant monitoring system. Possible working-environment monitoring of an efficient plant can help analyze the cause of any failure by backtracking the working environment when a failure occurs. In addition, it is easy to expand or add a sensor function using the Arduino platform and an expansion board.

• Journal of the Korea Convergence Society
• /
• 제9권7호
• /
• pp.231-240
• /
• 2018

Automobile industry is facing a variety of risks, including the rise of international oil price and the increase of car prices. In addition to the government's deregulation, efforts should be made to improve management aiming at higher production efficiency. In this study, we established a model for evaluating the procurement logistics based on the Fuzzy-AHP-TOPSIS by using the factors that are actually used in real companies aimed at the improvement of procurement logistics. A total of three automobile factories of Company G were chosen as the evaluation subject. In the result of the Fuzzy-AHP analysis that was conducted on a sample of three car factories, solving the long-term quality problems, minimizing the stop time due to the shortage of materials, preventing the of equipment accident, and solving the short-term quality problems were proven to be the most important factors. TOPSIS analysis result indicated that Factory B had the best procurement logistics. Our study has significance that it can contribute to the improvement of efficiency in the automobile industry as the evaluation model suggested in this study can be used for regular evaluation related to the procurement logistics in the future.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• 제45권1호
• /
• pp.41-49
• /
• 2008

Many machineries and equipments are being changing to various and complicated by development of recent technology and arrival of convergence age in distant future. These various and complicate equipments need more precise outcomes and low-power consumption sensors to get close and exact results. In this paper, we proposed fault tolerance and feedback theorem for sensor network and MEMS circuit which has a benefit of energy efficiency through wireless sensor network. The system is provided with independent sensor communication if possible as unused action, using idle condition of system and is proposed the least number of circuits. These technologies compared system efficiency after examining product of each Moving Distance by developed sensor which gives effects to execution of system witch is reduced things like control of management side and requirement for hardware, time, and interaction problems. This system is designed for practical application; however, it can be applied to a normal life and production environment such as "Ubiquitous City", "Factory Automata ion Process", and "Real-time Operating System", etc.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제16권1호
• /
• pp.68-80
• /
• 2006

This study aimed to prepare the fundamental data and assess the status and trend of exposure level for 5 chemical substances such as sulfuric acid, hydrogen chloride, ammonia, formaldehyde and phenol in manufacturing industry by type of industry, working process, and size of factory, chronological change. Subjects related to this study consist of 146 factories, 12 industries and 17 working processes located in Busan area from Jan. 1997 to Dec. 2001. 1. All 5 kinds of chemical substances by type of industry, working process were generated in chemical manufacturing industry. There were founded in 8 types of industries and 13 types of working processes for ammonia, which is the highest number of in all 5 chemical substances. 2. In terms of the exposure level for 5 chemical substances by type of industry, working process, geometric mean concentration for sulfuric acid was $0.40mg/m^3$ in manufacture of chemicals and chemical products, $0.30mg/m^3$ in compounding process, for hydrogen chloride was 0.57 ppm in manufacture of basic metal, 0.48 ppm in dyeing process, for ammonia was 1.11 ppm in manufacture of rubber and plastic products, 0.94 ppm in buffing process, for formaldehyde was 0.49 ppm in manufacture of wood and of products of wood and cork, except furniture; manufacture of articles straw and plating materials, 0.53 ppm in mixing process, and for phenol were 0.53 ppm in manufacture of chemical and chemical products, 0.55 ppm in compounding process, respectively. Results for 5 chemical substances by type of industry and working process were significantly higher than those of the others(p<0.05). 3. The exposure level for hydrogen chloride, formaldehyde were significantly increased by size of industry (p<0.01). ammonia was significantly decreased by size of industry (p<0.01). 4. In trend of the concentration difference of five chemical substances by chronology, geometric mean concentration for sulfuric acid was significantly increased (p<0.01), hydrogen chloride and ammonia were significantly decreased by year (p<0.05) and for formaldehyde and phenol were decreased in chronological change. According to the above results 5 chemical substances were founded together in a way mixed in the same places one another and concentrations of chemical substances by industry, working process, size of industry and year appeared markedly. The authors recommend more systemic and effective work environmental management should be conducted in workplaces generating five chemical substances.

• Journal of the Korean Institute of Gas
• /
• 제23권6호
• /
• pp.1-7
• /
• 2019

Most oil refineries and chemical plants have flare systems designed to mitigate pressure rises in process facilities in case of emergencies that require the release of large amounts of gas due to sudden process shutdowns such as power outages. However, the rise of the flame of the flare system causes civil complaints from residents around the factory due to visible pollution, and economic loss occurs in the company, which requires constant management. In this study, two items were diagnosed and analyzed in order to derive the optimal operation method of flare system. First, to detect the cause of the rise in flame height, the acoustic leak detector was used to check gas leaks in safety valves and pressure control valves. Second, to identify the cause of flame instability, the pulsation phenomenon was diagnosed through the CFD simulation and modeling experiments of the sealing drum. By confirming the leak at 4.3% of the safety valve and 10% of the pressure control valve, the cause of abnormal sparking was derived. The information presented in this study can be easily applied to any company that has a flare system, and is expected to prevent complaints and product loss.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제20권3호
• /
• pp.1-9
• /
• 2016

The purpose of this study is to examine the shear strength and structural performance of DH-Beams. The DH-Beam construction method uses thin steel plates as form-works and structural elements. Steel plates and rebars for DH-Beams were prefabricated at factory and then erected before casting concrete at construction sites. In this study, the contribution of steel plates to the shear strength of DH-Beam was evaluated since the plates were expected to work as reinforcements. Five test specimens were made for experimental and analytical studies. They consisted of two DH-Beams for the positive loading test and two DH-Beams for the negative loading test and a RC beam for the comparison purpose. Test results on DH-Beams were compared with design equations and the RC beam test result. It was proven that DH-Beams demonstrated the good shear behavior showing sufficient strengths and deformation capacities. Nonlinear analyses with test specimens were also used to evaluate the contribution of DH plates to strengths. Analytical models included various cases such as beams with lateral plates only or beams without any plates. These analyses also showed that steel plates can contribute to the enhancement of shear strength of DH-Beams. Based on experimental and analytical studies, it was concluded that steel plates of DH-Beams can be used as good shear reinforcements.

• Journal of Distribution Science
• /
• 제12권12호
• /
• pp.55-63
• /
• 2014

Purpose - In urban regeneration projects, considerations for rejuvenating traditional public markets are becoming increasingly important. That is because the traditional market is not just a commercial space but also a living center for local people's existence. Cultural contents like these are invaluable assets in the contemporary economy. However, traditional markets are gradually declining because of changes in distribution systems and consumer lifestyles. New distribution systems such as modern distribution markets, home shopping, and online shopping malls made traditional markets less competitive. Further, traditional markets have not been able to adapt to the changing consumption styles of younger generations. Some say that it is a natural phenomenon that cannot be stopped. However, traditional markets are not just another distribution system but also a valuable resource that encapsulates the local people's tradition and history. Thus, a revitalization strategy for traditional public markets has become an urgent task in contemporary urban regeneration projects. This study aimed to find ways to activate traditional public markets by making it a community landmark based on visual merchandising perspectives. Research design and methodology - This study focused on analyzing Granville Island (Vancouver, Canada) as a role-model project for rejuvenating the traditional market. It investigated Granville Island both with walk-through evaluation and literature reviews. Results - We found that it has been developed not only to improve visual aspects, but also to promote cultural contents with high value added. For example, the developers maintained the visual elements that tell the original history of the site as an industrial factory. The renewal project had a balance between improving the outer look and creating attractive contents. The following are the merits of Granville Island that Korean traditional markets should note. First, they kept the whole area clean and hygienic. Second, merchants are well educated, business-savvy, and consumer-oriented. Third, the area's total environmental designs were done by professionals of a high caliber. Fourth, the city government and the merchants'association were collaborating well in their efforts to accommodate the changing needs of consumers. Conclusions - This study made the following suggestions as a conclusion. First, it will be a very powerful tool to rejuvenate the traditional market if we can discover unique cultural resources and develop them as cultural products, experiences, and events. Consumers of the 21st century have a strong tendency to consume not only material products, but also the experiences and memories attached to them. Second, in order to maintain the unique characteristics of traditional markets, fostering the viability of the merchants' association and local residents' society would be essential. Third, it is necessary to make the traditional market into a cultural place not only for the shopping patronage of local residents, but also for attracting tourists to increase sales. Finally, professional management and design approaches are needed in order to make the traditional market a pleasant space from a visual merchandising standpoint.

• Journal of Digital Convergence
• /
• 제15권12호
• /
• pp.127-136
• /
• 2017

The purpose of this study is to explore some directions and alternatives for reforming the school education system, which is one of the core policy agendas of the Korean society that has met the upcoming 4th industrial revolution era and intelligence information society. Korean school education is a supplier-oriented system that does not take into consideration student's individual needs and aptitudes, and maintains uniform educational and learning practices while strengthening the characteristics of factory school model of the early 20th century. Especially, according to the excessive follow-up of the college entrance examination of the people the de-contextualization of knowledge and the instrumentation and learning of the education has been deepened. For the reform of the education system, first, it should transform the curriculum delegation system from the current administrative to teacher-based system. Second, we need to dismantle the bureaucratic corps of teacher that erodes the autonomy of the teacher and should establish the professional teacher system. Third, we should overcome egoism of each curriculum territory and reform the teacher education system. Fourth, it is necessary to overhaul the system of education and administrative bureaucracy as well as to overhaul the system of educational law. Fifth, it is necessary for the school administration to provide more effective communication between learners and teachers.

• Korean Chemical Engineering Research
• /
• 제44권2호
• /
• pp.149-159
• /
• 2006

This research is a development of useful S/W program for real industry about optimal product scheduling in real plant for manufacturing polymer products. For this, we used a fine model with total amount of losses in weight(ton) as an objective for optimal scheduling and a genetic algorithm for optimization in this factory they manufacture three different products. Major products are A and B but the product which can be process in the period of products change over. They also sells them as a chap product in market. The major products have several types of packing process-bulk, pack for domestic market, pack for export. The demands of product with each packing type are increased, and frequently they failed keep the deadline for sail. Based on realistic production situation, we composed a fine modeling for optimal scheduling. And we also develop a S/W program for optimal scheduling which can be used by non-specialist in scheduling problem. We used a modified genetic algorithm and it gave us a better solution in process. We can have a result of reducing the total amount of losses in weight by half compared with the losses when existing production schedule.