• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1370-1376
• /
• 2018

The electronic structures, magnetic properties and half-metallicity in $Zr_2RuZ$ (Z = Ga, In, Tl, Ge, Sn, and Pb) alloys with $AlCu_2Mn-$ and $CuHg_2Ti$-type structures were investigated using first-principles density functional theory (DFT) calculations. The calculations showed that $Zr_2RuIn$, $Zr_2RuTl$, $Zr_2RuSn$, and $Zr_2RuPb$ compounds with $CuHg_2Ti$-type structures were half-metallic ferromagnets with half-metallic band gaps of 0.18, 0.24, 0.22, and 0.27 eV, respectively. The half-metallicity originated from d-d and covalent hybridizations between the transition metals Zr and Ru. The total magnetic moments of the $Zr_2RuZ$ (Z = In, Tl, Sn, and Pb) compounds with $CuHg_2Ti$-type structures were integer values of $1{\mu}B$ and $2{\mu}B$, which is in agreement with Slater-Pauling rule ($M_{tot}=Z_{tot}-18$). Among these compounds, $Zr_2RuIn$ and $Zr_2RuTl$ were half-metals over relatively wide regions of the lattice constants, indicating that these two new Heusler alloys are ideal candidates for use in spintronic devices.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.6
• /
• pp.11-21
• /
• 2022

Sorption of phenanthrene (PHE) and pyrene (PYR) in several sorbents, i.e., natural soil, BionSoil^®, Pahokee peat, vermicompost and Devonian Ohio Shale and a surfactant (hexadecyltrimethyl ammonium chloride)-modified montmorillonite (HDTMA-M) were investigated. Pyrene exhibited higher sorption tendency than phenanthrene, as predicted by its higher octanol to water partition coefficient (K_ow). Several sorption models: linear, Freundlich, solubility-normalized Freundlich model, and Polanyi-Manes model (PMM) were used to analyze sorption isotherms. Linear isotherms were observed for natural soil, BionSoil^®, Pahokee peat, vermicompost, while nonlinear Freundlich isotherms fitted for Ohio shale and HDTMA-M. The relationship between sorption model parameters, organic carbon content (f_oc), and elemental C/N ratio was studied. In the binary competitive sorption of phenanthrene and pyrene in natural soil, competition between the solutes caused reduction in the sorption of each solute compared with that in the single-solute system. The ideal adsorbed solution theory (IAST) coupled with the single-solute Freundlich model was not successful in describing the binary competitive sorption equilibria. This was due to the inherent nature of linear sorption of phenanthrene and pyrene in natural soil. The result indicates that the applicability of IAST for the prediction of binary competitive sorption is limited when the sorption isotherms are inherently linear.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2003.04a
• /
• pp.39-48
• /
• 2003

The ornamental industry encompasses cut flower, pot plant, turfgrass and nursery stock production and is an important part of the agricultural sector. As internationally traded commodities, cut flowers and plants are an integral part of the economy of a number of developing countries in South America, the Caribbean and Africa. Genetic modification (GM) is a tool with great potential to the ornamental horticulture industry. The rapid progress in our knowledge of plant molecular biology can accelerate the breeding ornamental plants using recombinant DNA technology techniques. Not only is there the possibility of creating new, novel products the driver of the industry but also the potential to develop varieties requiring less chemical and energy inputs. As an important non-food agricultural sector the use of genetically modified (GM) ornamental crops may also be ideal for the intensive farming necessary to generate pharmaceuticals and other useful products in GM plants. To date, there are only a few ornamental GM products in development and only one, a carnation genetically modified for flower colour, in the marketplace. International Flower Developments, a joint venture between Florigene Ltd. in Australia and Suntory Ltd.of Japan, developed the GM carnations. These flowers are currently on sale in USA, Japan and Australia. The research, development and commercialisation of these products are summarised. The long term prospects for ornamental GM products, like food crops, will be determined by the regulatory environment, and the acceptance of GM products in the marketplace. These critical factors will be analysed in the context of the current legislative environment, and likely public and industry opinion towards ornamental genetically modified organisms (GMO's).

• Current Optics and Photonics
• /
• v.7 no.2
• /
• pp.183-190
• /
• 2023

Three-dimensional (3D) displays provide a significant advantage over traditional 2D displays by offering realistic images, and table-style displays in particular are ideal for generating 3D images that appear to float above a table. These systems are based on multiview displays, and are typically operated using temporal or spatial multiplexing methods to expand the viewing zone (VZ). The VZ is an expanded space that results from merging the sub-viewing zones (SVZs) from which an individual view is made. To increase the viewing angle, many SVZs are usually required. In this paper, we propose a table-ornament electronic holographic display that utilizes 3f parabolic mirrors. In holography, the VZ is not simply expanded but synthesized from SVZs to implement continuous motion parallax. Our proposed system is small enough to be applied as a table ornament, in contrast to traditional tabletop displays that are large and not easily portable. By combining multiview and holographic technologies, our system achieves continuous motion parallax. Specifically, our system projects 340 views using a time-multiplexing method over a range of 240 degrees.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.2
• /
• pp.175-185
• /
• 2023

A hybrid supercapacitor is a promising energy storage device in view of its excellent capacitive performance. Commercial three-dimensional foam nickel (Ni) can be used as an ideal framework due to an interconnected network structure. However, its application as an electrode material for supercapacitors is limited due to its low specific capacity. Herein, we report a successful growth of MnO₂ on the surface of graphene by a one-step hydrothermal method; thus, forming a three-dimensional MnO₂-graphene-Ni hybrid foam. Our results show that the mixed structure of MnO₂ with nanoflowers and nanorods grown on the graphene/Ni foam as a hybrid electrode delivers the maximum specific capacitance of 193 F·g^-1 at a current density 0.1 A·g^-1. More importantly, the hybrid electrode retains 104% of its initial capacitance after 1,000 charge-discharge cycles at 1 A·g^-1; thus, showing the potential application as a stable supercapacitor electrode.

• Journal of Korean Society of Transportation
• /
• v.24 no.5 s.91
• /
• pp.35-44
• /
• 2006

Acceleration and deceleration curves have been used for design purposes worldwide. The curve in design level has been regarded as an single deterministic curve to be used for design of climb lanes. It should be noted that the curve was originally made using ideal driving truck and that the curve is applied during design based on the assumption of no difference between ideal and real driving conditions. However. observations show that aged vehicles and lazy behavioring drivers nay make lower performance of vehicles than the ideal performance. The present paper provides the results of truck speeds at climbing lanes then probabilistic variation of acceleration and deceleration corves. For these purposes. a study about identification of vehicle makers, and weights for trucks at freeway toll gates and then observation of vehicle-following speed were performed. The 85%ile results obtained were compared with the deterministic performance curves of 180, 200, and 220 Ib/hp. It was identified that the performance of 85%ile results obtained from vehicle-following-speed observations were lower than one from deterministic performance curves. From these results, it may be concluded that at the beginning Point of climbing lanes additional $16.19{\sim}67.94m$ is necessary and that at the end point of climbing lanes $53.12{\sim}103.24m$ of extension is necessary.

• Culinary science and hospitality research
• /
• v.16 no.4
• /
• pp.124-138
• /
• 2010

This study aims to investigate the effect of hotel and restaurant employees' eating habits on their dining-out behavior. 309 workers from die hotel and restaurant companies participated in the survey, and SPSS 14.0 was used to perform frequency analyses, factor analyses, f-tests, ANOVA and multiple regression analyses. An exploratory factor analysis revealed three eating habits; unhealthy, healthy and ideal eating habits with 62.250% of the cumulative variance explained. The factor analysis included the priority on menu items, atmosphere and location of a restaurant with 60.658% of the total variance explained The results of the t-tests gave partial supports for the hypothesized gender difference in eating habits and for the hypothesis that eating habits would differ according to marital status. The result of ANOVA gave a partial support for die hypothesized age difference in eating habits. The result of the multiple regression analysis showed that all eating habits, unhealthy($\beta$=0.326, p<0.000), healthy($\beta$=0.290, p<0.000) and ideal($\beta$=0.305, p<0.000), had a significant effect on the priority on menu items. Eating habits explained 13.1% of die total variance in the importance of restaurant atmosphere and location. The influence of unhealthy eating habits was not statistically significant ($\beta$=0.002, p<0.965) while the influence of healthy($\beta$=0.309, p<0.000) and ideal eating habits($\beta$=0.189, p<0.000) was statistically significant Consequently, there was a partial support for the hypothesis that eating habits would influence die priority of restaurant atmosphere and location as a factor when dining out.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.5
• /
• pp.62-70
• /
• 2007

In this paper, the boost Power Factor Correction(PFC) technique for Direct Torque Control(DTC) of brushless DC motor drive in the constant torque region is implemented on a TMS320F2812DSP. Unlike conventional six-step PWM current control, by properly selecting the inverter voltage space vectors of the two-phase conduction mode from a simple look-up table at a predefined sampling time, the desired quasi-square wave current is obtained, therefore a much faster torque response is achieved compared to conventional current control. Furthermore, to eliminate the low-frequency torque oscillations caused by the non-ideal trapezoidal shape of the actual back-EMF waveform of the BLDC motor, a pre-stored back-EMF versus position look-up table is designed. The duty cycle of the boost converter is determined by a control algorithm based on the input voltage, output voltage which is the dc-link of the BLDC motor drive, and inductor current using average current control method with input voltage feed-forward compensation during each sampling period of the drive system. With the emergence of high-speed digital signal processors(DSPs), both PFC and simple DTC algorithms can be executed during a single sampling period of the BLDC motor drive. In the proposed method, since no PWM algorithm is required for DTC or BLDC motor drive, only one PWM output for the boost converter with 80 kHz switching frequency is used in a TMS320F2812 DSP. The validity and effectiveness of the proposed DTC of BLDC motor drive scheme with PFC are verified through the experimental results. The test results verify that the proposed PFC for DTC of BLDC motor drive improves power factor considerably from 0.77 to as close as 0.9997 with and without load conditions.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.3
• /
• pp.164-170
• /
• 2000

Neutron single crystal and powder diffraction techniques have been applied to the structure analysis of yttria-stabilized zirconium, Z $r_{0.73}$ $Y_{0.27}$ $O_{1.87}$., prepared by the skull-melting method. The crystal structure has been determined to be cubic symmetry, space group Fm/equation omitted/ with a=5.155(2)$\AA$, V=136.99(5)$\AA$, Z=4, and R(F)=5.65%, $\omega$R(I)=10.57% for 70 integrated intensities of Bragg Peaks observed from single crystal of Z $r_{0.73}$ $Y_{0.27}$ $O_{1.87}$. The stabilizer atoms randomly occupy the zirconium sites and there are displacements of oxygen atoms with amplitudes of $\Delta$/a~0.033 and 0.11 along <110> and <100> directions from the ideal positions of the fluorite structure, respectively. There are no significant differences in crystallographic data between the single crystal and powder studies. Diffraction pattern after Rietveld refinement, using neutron powder data, has shown the evidence of a tetragonal impurity phase, or a slight tetragonal distortion.

• Korean Journal of Environment and Ecology
• /
• v.31 no.4
• /
• pp.349-364
• /
• 2017

Duckweed family (Lemnaceae Martinov), including the genus Lemna L., is a typical floating aquatic perennial plant, and about five genera and 40 species in the family are in wide distribution around the world except the polar regions. The genus Lemna is the smallest and the simplest plant among the angiosperms. It has a characteristic of doubling every three days with fast vegetative propagation, which helps the organisms to increase in rapid growth. As such, the plant is ideal for environmental pollution assessment and toxicity test. Although taxonomists and scholars have used different scientific names for the species, many of them have agreed that there is only one member of species of the genus Lemna in Korea. Paying attention to the external morphological variation observed in the Korean genus Lemna, we conducted a molecular phylogenetic analysis to identify the entity of the Korean Lemna species and to investigate the possibility of two or more members of the species existing in Korea. We determined and aligned the DNA sequences of the atpF-H region of the chloroplast DNA in 37 populations of the nationally distributed Lemna species. The results showed that the sequence length of the cp DNA atpF-H region was 463-483 bp, the length of the aligned sequences was 488 bp, and the number of variation site in nucleotide sequences was 47. There were two types of aligned sequences of the cp DNA atpF-H region from 37 populations of Lemna species in Korea. The maximum parsimony analysis revealed that the Korean Lemna consists of two clades, and one of them had two subclades. The results suggest that, contrary to the general understanding, at least two taxa (L.aequinoctialis, L.minor) exist in Korea.