• Journal of Korean Society of Forest Science
• /
• v.89 no.5
• /
• pp.677-684
• /
• 2000

This study was conducted to investigate the relationship of development of root and soil condition and also to elucidate the difference between stands for mechanical and physical stability according to distribution of roots in the Norway Spruce (Picea abies [L.] Karst.) stands of 30 to 40 year of ages with different soil condition. In the root structure, remarkably different root pattern was shown among the three stands; Eberg$\ddot{o}$tzen stand showed large number f roots with much fine roots which deeply in vertical direction while Barbis stands had thicker root and small number of root than Eberg$\ddot{o}$tzen stand. The Weidenbrunnen stand showed differently half-vertical and plate root structure and the root developed not to be deeply compared to the other two stands. In the total number of root, Eberg$\ddot{o}$tzen stand had the most number of 74 and Barbis stand 33, Weidenbrunnen stand 57 respectively. Eberg$\ddot{o}$tzen stand had much more number of vertical root with 57 than the other two stand; Barbis 21 and Weidenbrunnen 36. In the total length of root, Weidenbrunnen stand showed to be longer than the other two stands and the length of horizontal root also showed longer. Regarding to the rates of horizontal root against vertical root, Eberg$\ddot{o}$tzen stand showed comparatively higher value as 1,2 than other two stands(0.5). In the total weight of root, Weidenbrunnen stand showed very high value compared with the other stands and ratio of vertical root against horizontal root was 0,16 which is very lower than the other two stands(0,4). The remarkable differences of root pattern of Norway spruce stands appeared in this study are through to be caused more by chemical property of soil such as acidity den the mechanical or physical factor of soil conditions.

• Asia pacific journal of information systems
• /
• v.24 no.3
• /
• pp.255-279
• /
• 2014

It is not too much to say that smartphones have become an essential part of our lives due to their versatility. Nevertheless, they still have less overall capabilities than their desktop counterparts. Specifically, they have small screens and low resolutions, which make their applications difficult to have a usable interface. To account for these limitations, the interface of smartphone applications should be designed carefully and properly. Good interface design to any application is critical. However, a comprehensive information systems (IS) literature review found that there has been little research on the user interface design of smartphone applications. More specifically, there has been little empirical evidence and understanding about how metaphors, an imaginative way of describing objects and concepts, in the user interface of smartphone applications affect users' intention to use the applications. Thereby, the research goals of this study are to examine 1) the effects of the metaphors in the user interface of smartphone applications on the interaction between users and applications and 2) the effects of mediating variables including the interaction between users and applications, users' beliefs and attitudes, on users' intention to use the applications. A survey was conducted to collect data. University students and practitioners participated in the survey. A 24-item questionnaire was developed on a 5-point Likert-type scale. The measurement items were mostly adapted from the previous studies in the IS literature and modified to fit the context of this study. First, a principal component factor analysis was performed to explore the inter-relationships among a set of variables. The analysis showed that most of the items loaded quite strongly on the six components. The analysis also revealed the six components with eigenvalues exceeding 1, explaining a total of 70.7 per cent of the variance. The reliabilities of the items were also checked. Most Cronbach alpha values were above 0.8, so the scales were considered reliable. In sum, the results of the analysis support the decision to retain the six factors for further investigation. Next, the structural model was analyzed with AMOS structural equation modeling. The values of GFI, AGFI, NFI, TLI, CFI, and RMSEA were checked. The values showed that the research model considerably have a good fit in general. Next, the convergent and discriminant validities of all constructs were examined. The values for the standardized regression weights and critical ration (CR) indicated sufficient convergent validity for all constructs. In addition, the square root of the average variance extracted (AVE) of each construct was compared with its correlations with all other constructs. The results supported discriminant validity for all constructs. In sum, the results of analysis demonstrated adequate convergent and discriminant validities for all constructs. Finally, path coefficients between the variables were examined. Methphor was found to have an impact on interaction (${\beta}$ = .457, p = .000). There were also significant effects of the interaction on perceived usefulness (${\beta}$ = .273, p = .000) and ease of use (${\beta}$ = .405, p = .000). User attitude was significantly influenced by these two beliefs, perceived usefulness (${\beta}$ = .386, p = .000) and ease of use (${\beta}$ = .347, p = .000) respectively. Further, the results of analysis found that users' intention to use smartphone applications was significantly influenced by user attitude (${\beta}$ = .567, p = .000). Based upon the analyses, all hypotheses were supported. This study found that the metaphors used in the interface of smartphone applications affect not only the interaction between users and applications, but also users' intention to use the applications through the mediating variables, perceived usefulness and ease of use. These findings imply that if the metaphors used in the user interface of application are easy enough to understand for smartphone users, then the application can be perceived useful and easy to use, which in turn make users to have an intention to use the application. In conclusion, this study contributed not only to validate and extend Technology Acceptance Model (TAM) partially, but also to develop the construct of metaphor in smartphone settings. However, since a single empirical study cannot be enough to validate the findings, some limitations should be considered.

• Clinical and Experimental Pediatrics
• /
• v.46 no.11
• /
• pp.1061-1066
• /
• 2003

Purpose : The rising prevalence of childhood obesity may be due to an energy imbalance between food intake and energy expenditure. Recently, consumption of beverages in children has increased. The aim of this study is to provide useful information for the prevention and the control of childhood obesity by assessment of variable beverage consumption. Methods : Fight hundred seventy seven children(M : F=1 : 1.02, mean age; 9.7 years) from two primary schools in Seoul in May 2003 were enrolled. Body mass index(BMI) was calculated and the degree of obesity was classified into normal, overweight and obese groups by BMI percentile. Parental BMI, socio-economic factor, 3-day dietary intake, calory intake and beverage intake were examined by questionnaires. We researched beverages and classified them into six categories, milk, other milk products, soda, sports beverage, other beverage. Results : The prevalence of obesity was 7.2%. The parental BMI of the obese group were higher than those of the other groups. There was no significant difference in birth weight, or parents' intellectual and economic levels between the obese group and the other groups. There was no significant difference in daily total calory intake between the obese group and the other groups. The obese group of 7-9 year-old-males was higher than the other groups in sodas, and sports beverages intake. The obese group of 10-12 year-old-males was higher than the other groups in total beverage intake and other beverage intakes. The obese group of 10-12 year-old-females was higher than the other groups in other milk products. Conclusion : Excessive intake of beverages is associated with childhood obesity. Efforts to decrease intake of beverages may be important approaches to counter the rise in the prevalence of obesity.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.10 no.2
• /
• pp.185-192
• /
• 2007

Purpose: This study was conducted to evaluate the role of adiponectin, leptin, and tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$) in the pathogenesis of non-alcoholic fatty liver disease (NAFLD) in obese children, and to elucidatethe relationship between these adipokines and insulin resistance. Methods: A total of 61 obese children (M : F=42 : 19, mean age 11.2${\pm}$1.3 years) admitted to our facility between March 2004 and June 2005 were included in this study. Patients were divided into three groups based on their NAFLD status obese children without fatty liver (N=23); obese children with simple steatosis (N=20); and obese children with non-alcoholic steatohepatitis (NASH) (N=18). The serum levels of adiponectin, leptin, and TNF-${\alpha}$ were measured, and insulin resistance determined by homeostasis model assessment (HOMA-IR) was calculated to estimate insulin resistance. In addition, the VSR (visceralsubcutaneous fat ratio) was estimated using abdominal computed tomography. Results: There was no difference in serum TNF-${\alpha}$ and leptin levels observed between the 3 groups (22.13${\pm}$6.37 vs. 21.35${\pm}$6.95 vs. 25.17${\pm}$9.30; p=0.342 & 20.29${\pm}$8.57 vs. 16.42${\pm}$6.85 vs. 20.10${\pm}$7.86; p=0.330). However, the serum adiponectin level was significantly lower in children with non-alcoholic steatohepatitis (NASH) than in the other two groups (6.08${\pm}$1.38 in children without steatosis vs. 5.69${\pm}$0.79 in simple steatosis vs. 4.93${\pm}$1.75 in NASH; p=0.026). In addition, the VSR was significantly increased in the NASH group (0.31${\pm}$0.08 vs. 0.32${\pm}$0.11 vs. 0.47${\pm}$0.14; p=0.001), and HOMA-IR revealed a significant difference among the three groups (4.77${\pm}$3.67 vs. 6.89${\pm}$7.05 vs. 10.42${\pm}$6.73; p=0.000). However, there was no significant correlation observed between the adiponectin levels and the HOMA-IR or the VSR (r=-0.117; p=0.450 & r=-0.106; p=0.499). Conclusion: Insulin resistance may affect the development of hepatic steatosis and steatohepatitis in children, and the results of this study suggest that, of several adipokines evaluated, adiponectin is important in the progression of steatosis to steatohepatitis in obese children.

• Journal of Life Science
• /
• v.28 no.4
• /
• pp.435-443
• /
• 2018

AMP-activated protein kinase (AMPK) functions as a metabolic master through regulating and restoring cellular energy balance. In skeletal muscle, AMPK increases myofibril protein degradation through the expression of muscle-specific ubiquitin ligases. Mori Folium, the leaf of Morus alba, is a traditional medicinal herb with various pharmacological functions; however, the effects associated with muscle atrophy have not been fully identified. In this study, we confirmed the effects of AMPK activation by examining the effects of 5-aminoimidazole-4-carboxamide ribonucleotide (AICAR), an activator of AMPK, on the induction of atrophy and expression of atrophy-related genes in C2C12 myotubes. We also investigated the effects of the ethanol extract of Mori Folium (EEMF) on the recovery of AICAR-induced muscle atrophy in C2C12 myotubes. It was found that exposure to AICAR resulted in the stimulation of Forkhead box O3a (FOXO3a); an up-regulation of muscle-specific ubiquitin ligases such as Muscle Atrophy F-box (MAFbx)/atrogin-1 and muscle RING finger-1 (MuRF1), and a down-regulation of muscle-specific transcription factors, such as MyoD and myogenin; with the activation of AMPK. In addition, AICAR without cytotoxicity indicated a decrease in diameter of C2C12 myotubes. However, treatment with EEMF significantly suppressed AICAR-induced muscle atrophy of C2C12 myotubes in a dose-dependent manner as confirmed by a decrease in myotube diameter, which is associated with a reversed stimulation of FOXO3a by the inhibition of AMPK activation. These results indicate that the activation of AMPK by AICAR induces muscle atrophy, and EEMF has preeminent effects on the inhibition of AICAR-induced muscle atrophy through the AMPK signaling pathway.

• The Korean Journal of Malacology
• /
• v.24 no.2
• /
• pp.121-130
• /
• 2008

In other aquaculture species, large improvements in growth have been achieved through selective breeding. Ezo abalone(Haliotis discus hannai) and disk abalone(H. discus discus) are major aquatic animals cultured in Asia, but selective breeding for the promotion of growth with these abalones has not been actively pursued. Recently significant efforts are being made to promote production of these species through selective breeding in Korea. The aims of this work were to estimate the general genetic parameters, heritabilities, and genetic and phenotypic correlations on growth-related traits at 1-year old in two Korean abalone subspecies, H. discus hannai and H. discus discus, by using multiple trait animal model. The data were collected from the records of 1,504 individuals produced from 22 sires and 26 dams in H. discus hannai and 297 individuals produced from 5 sires and 6 dams in H. discus discus, which evaluated by the Genetics and Breeding Research Center, National Fisheries Research & Development Institute(NFRDI). Genetic parameters were estimated for these abalone subspecies raised in Bukjeju branch, NFRDI, from May 20, 2004 to May 16, 2005, respectively. The heritability estimates obtained from restricted maximum likelihood(REML) were higher than expected, ranging from 0.40 to 0.43 for growth traits shell length, shell width and body weight in H. discus hannai and from 0.26 to 0.51 in H. discus discus, respectively. The heritabilities for shell shape and condition factor were lower than others of growth traits such as ranging from 0.09 to 0.19 in H. discus hannai and from 0.10 to 0.23 in H. discus discus, respectively. Genetic and phenotypic were > 0.93 between shell parameters and weight in two abalone species, respectively, indicating that breeding for weight gains could be successfully achieved by selecting for shell length.

• Journal of Environmental Science International
• /
• v.23 no.12
• /
• pp.2045-2056
• /
• 2014

In this study, pressure drop was measured in the pulse jet bag filter without venturi on which 16 numbers of filter bags (Ø$140{\times}850{\ell}$) are installed according to operation condition(filtration velocity, inlet dust concentration, pulse pressure, and pulse interval) using coke dust from steel mill. The obtained 180 pressure drop test data were used to predict pressure drop with multiple regression model so that pressure drop data can be used for effective operation condition and as basic data for economical design. The prediction results showed that when filtration velocity was increased by 1%, pressure drop was increased by 2.2% which indicated that filtration velocity among operation condition was attributed on the pressure drop the most. Pressure was dropped by 1.53% when pulse pressure was increased by 1% which also confirmed that pulse pressure was the major factor affecting on the pressure drop next to filtration velocity. Meanwhile, pressure drops were found increased by 0.3% and 0.37%, respectively when inlet dust concentration and pulse interval were increased by 1% implying that the effects of inlet dust concentration and pulse interval were less as compared with those changes of filtration velocity and pulse pressure. Therefore, the larger effect on the pressure drop the pulse jet bag filter was found in the order of filtration velocity($V_f$), pulse pressure($P_p$), inlet dust concentration($C_i$), pulse interval($P_i$). Also, the prediction result of filtration velocity, inlet dust concentration, pulse pressure, and pulse interval which showed the largest effect on the pressure drop indicated that stable operation can be executed with filtration velocity less than 1.5 m/min and inlet dust concentration less than $4g/m^3$. However, it was regarded that pulse pressure and pulse interval need to be adjusted when inlet dust concentration is higher than $4g/m^3$. When filtration velocity and pulse pressure were examined, operation was possible regardless of changes in pulse pressure if filtration velocity was at 1.5 m/min. If filtration velocity was increased to 2 m/min. operation would be possible only when pulse pressure was set at higher than $5.8kgf/cm^2$. Also, the prediction result of pressure drop with filtration velocity and pulse interval showed that operation with pulse interval less than 50 sec. should be carried out under filtration velocity at 1.5 m/min. While, pulse interval should be set at lower than 11 sec. if filtration velocity was set at 2 m/min. Under the conditions of filtration velocity lower than 1 m/min and high pulse pressure higher than $7kgf/cm^2$, though pressure drop would be less, in this case, economic feasibility would be low due to increased in installation and operation cost since scale of dust collection equipment becomes larger and life of filtration bag becomes shortened due to high pulse pressure.

• Women's Health Nursing
• /
• v.8 no.2
• /
• pp.232-243
• /
• 2002

The purpose of this study was to examine factors influencing the meaning of life for middle-aged women. The subjects for the study were 190 middle-aged women who live in Busan. Data were collected from May 25 to June 20, 1999. The instruments for this study were as follows : the meaning of life scale developed by Jung D. R(1978) ; the self-esteem scale developed by Ro, E. Y, Kwon, J. H.(1997) ; the volunteer activity scale developed by Park G. J.(1999), the marital satisfaction scale developed by Choi G. Y.(1999) ; and the health status scale developed by Kim S. Y. (1991). SPSS PC+ was utilized for data analysis. Data were analysed according to frequency and percentage, mean and standard deviation, t-test, ANOVA, Sheffe' s test and Pearson' s correlation coefficients and stepwise multiple regression. The reliability of the tools was tested by Cronbach's $\alpha$ : and it showed reliability scores of 0.88(for the meaning of life tool), 0.81(for the self-esteem tool), 0.94(for the marital satisfaction tool) and 0.78(for the health status tool). The results were as follows: 1) The scores showed that middle-aged women had a moderate level of meaning of life, with a mean of 30.31 and standard deviation of 6.24 (with values ranging from 12.00 to 48.00). The scores showed that middle-aged women had a moderate levels of self-esteem, with a mean of 28.92 and standard deviation of 4.67 (with values ranging from 10.00 to 40.00). The scores showed that middle-aged women had a very low level of volunteer activity, with a mean of 0.87 and standard deviation of 0.93(with values ranging from 0.00 to 1.00). The scores showed that middle-aged women had a moderate level of satisfaction in their marriages, with a mean of 31.99 and standard deviation of 7.84(with values ranging from 12.00 to 48.00). The scores showed that middle-aged women had a moderate level of health status, with a mean of 6.63 and standard deviation of 1.57(with values ranging from 3.00 to 9.00). 2) There was a statistically significant difference of the meaning of life of middle-aged women according to their religion(F=8.930, p=.000), christian ($31.94{\pm}5.96$) had more meaning th life than buddhists ($28.40{\pm}6.23$). 3) There was a statistically significant correlations between the subject' s self-esteem and the her meaning of life(r=0.477, p=0.000), the subject' s level of volunteer activity and meaning of life(r=.428, p=.000), her level of marital satisfaction and meaning of life(r=.417, p=.000), and her level of health status and meaning of life(r=.261, p=.000) among these middle-aged women. 4) Self- esteem was the highest factor influencing the level of meaning of life in middle-aged women. 40.0% of the total variance of levels of meaning of life by was dependent on self-esteem, volunteer activity, marital satisfaction and health status. In conclusion, the higher the self-esteem and levels of volunteer activity, marital satisfaction, and health status of middle-aged women, the higher the meaning of life for them. Therefore, it is necessary to elevate levels of the self-esteem and volunteer activity, marital satisfaction and health status in order to help middle-aged women have more meaning of life.

• Journal of the Korean Society of Costume
• /
• v.22
• /
• pp.135-158
• /
• 1994

The fashion industry of today is closely re-lated with the information activity. This study investigates now they take advantage of the fashion information by analysing some related fields including fashion design. Furthormore this study identify the factor which makes the design activity distinctive and predict and fu-ture trend in design. The purposes of this study through analysis are : to help find the way to facilitate the fashion industry and to develop the fashion merchandising in order to activate the re-cession of manufacturers and to improve competitiveness in the world market and to contribute to the academic achievement in the study of fashion merchandising. In the experimental approach the tasks of research are as follows: Research 1: The application of fashion infor-mation is discussed in terms of process and level. Research 2: The differences of the fashion design activities are captured on the basis of the characteristics of manufactures and fashion specialists and fashion information ac-tivities. The factors are identified which pre-dict and discriminate the results of fashion de-sign activities. The questionaire and interview were conduc-ted among women's clothing manufactures in Seoul and their fashion specialists in charge of merchandise development. The methods of survey were designed on the basis of theories developed so far and on he advice from the social scientists and fashion specialists. the methods were corrected and complemented through the 1st and 2nd preliminary investigations before their application For data analysis cronbach's a coefficient fre-quency percentage average standard devi-ation pearson's correlation coefficient were calculated and t-test F-test(ANOVA) Duncan's multiple range test regression and Discriminant analysis were conducted. The results of analysis throughout the experimen-tal studies were as follows: 1. The analysis of fashion in formation (1) the present application of information a. The source of information : Both the foreign and the domestic information came mostly from fashion journals magazines newspapers and other periodicals, the main source of market information was collected from the survey of popular items in recent years the data about the life-style of customers and their tastes for wearing were widely used as the information about consumers. b. The applicaton of information : The most widely used information was about fabrics. The foreign information was prefered on the whole. The domestic problems pointed out in this investgation were that the domestic journals showed the lack of specialty and the special organizations for fashion informatino were in urgent need. (2) The research of fashion information a. The various processes and levels of in-formation activities: Among the process of collection analysis and distribution the collec-tion process showed a good acheivement whereas the distribution whereas the distribution didn't. In levels of the systematic activities the acceptance of support and the utility of supported instruments the first indicated a high degree whereas the second showed lowest. b. The correlationship among subvariables : There was a significant correlation between the collection and the analysis process. The systematic activities revealed close relation-ship with the analysis process and the accept-ance of support with the distribution process. The close correlation was found between the utility of supported instruments and the analy-sis process. 2. The analysis of the fashion design activities (1) No significant differences were found in the design activities when the characteristics of companies were compared only. (2) According to the characteristics of fashion specialists the one with age experi-ence and high income showed rather good achievement but no significant differences were captured among sex department in charge title academic background education in abroad and field experience (3) The fashion information activities were strongly correlated with the design achieve-ment : The analysis process and the system-atic activity level had a great influence on the design activities. (4) In order to examine which cha-racteristics in (1-3) made it possible to pre-dct and discriminate the achievement in de-sign activities the Discriminant analysis was carried out. The results were as follows: the fashion information activities showed the highest discriminant rate. Next came the in-come level experience and age in that order Those four variables discrimated 37 from 50 who showed great achievement in design area (74%) and 51 from 83 in low achievement group (81%) Thus the total discriminant rate was 77.5%.

• Journal of the Korean Society of Costume
• /
• v.22
• /
• pp.263-276
• /
• 1994

The achievement of notable social reoforms attained during the period of 19th and 20th centuries needlessly speaking remodelded the social environmental into several different patterns such as :1) high industrialization 2) propensity to consume 3) up graded overall social stands. Accordingly the industrial world of the but-tons too established the mess production syhstem by breaking from convention of hand-craft work of 17th century. The raw materials used in the production line on buttons during the 20th century are almost all-kind of materials one can possibly named including cheap plastic which enabled production lines to produce cheaper but higher productivities of the buttons being produced, The design (incused design) used in the 19-20h centuries are : men landscape, sports features, birds, livestocks, bugs, or geomatric features, tec, 1, The classification o f the buttons by materials Techniques shapes colors marking (Incused design) used in the productionof buttons in the England United States of America Laska Italy france Denmark Japan and India are categolizzed as : natural raw materials and syntetical resines. 1) Of the natural raw materials used are : Matal Enamel Iodine Agate, Coral, Green jade(Jasper) Granite, Wood, Ivory, Horn and bone etc. 2) The sythetical resin used in the button in-dustries are : Artificial jewell glass Acrylic material Styroform Celluloid and Nylon etc. 2. The thecnique quoted in producing buttons are hand craft work inlay work precision casting press mosic dye etching, processing, engraving and embossed carving etc. 3. The major designs used in the buttons in -dustries are : Round shape however elliptical column angular and edge shape often used. 4. The colors used are : The multi-colors were highly used than mono-colored materials such as : Adjoining Color and Contrast Color. The highest consideration to be considered in choosing the colors for the buttons are harmonization and matching factor with the garment or dresses to be wore. 5. The major design(incused design) on the buttons are embodiment and the design were also used in order of abstractive-combination abstractive with has offers much surprising. The button industries during the 19th and 20th centuries were not only the determination factors those can judge the value of self-pride of Nation and which were far beyond the in-dustrial arts in those days but also highly refelected and influenced by cultural sense ideology and self-pride of the Nation of those period. The followings are details of the role of the buttons categolized in the order of functional ornamental and symbolical aspects : 1. The functional role : The functional role of the buttons were simply designed for dress how-ever the buttons beyond from this role of function now a days. 2. The ornamental role : The ornamental role of he button beyond from this role of the button were effectuated by : 1) shape materials colors 2) technique locations size and design (incused design) 3) The ramaterials used for buttons shall not be over looked because it is highly depends on the taste sense and combination of harmony with the garment to be wore. 4) The color of the buttons are made well contrasted with the color of garments just as in the case of other artistical area such as matchs with the color of garment of contrast with brigtness of colors contrasted as complementary color and so and so. 5) The technique being adoped are: precision casting press handcraft inlay work etching mosic etc,. Since the buttons are no longer a simple catching devise used to fasten together the different part of the dress but now it has formed own and occupied the independent role in the garment or dresses location can be de-termined and varying depending on the ideas of designers. The size of the buttons has no specific limits, However the variation has widely dependined on the entire circumperence rhythm contrast harmonization of the garments. 3. The symbolical role : Since the button is no longer a just a simple devise for catching and fastening device used fastening together the different part of the garments but now were built a independent area as major part of the Garment and well reflected all kinds of occupations political background cultural as-pect etc. on the buttons. The design of buttons in the western circles are more simplified but they are polished looks and their techniques of manufacturing are comination of both machanis and handcraft. The colors used in the buttons are pretty well harmonized with garment(dress). Almost all kind of materials can be used in the but-tons however materials used in the buttons are : Bone of livestocks ivory, turtle shell are no longer used because the prevention of cruely of animal. On the contraly the level of buttons indus-try of Korea is far to reach and catch up with the level of western circles. It is highly suggested therefore the but-tons industrial field of Republic of Korea shall place and encouragement in producing beter industrial environment of the buttons based on the traditional and cultural aspect of republic of Korea to produce both manufacturing of qulified and best designed and colored buttons.