• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.7
• /
• pp.946-950
• /
• 2009

Chemical components and antioxidative activities of white ginseng, red ginseng and extruded white ginseng (EWG) were evaluated. Extrusion condition was 20% moisture content, 100 and $140^{\circ}C$ barrel temperature. The results showed that total sugar and acidic polysaccharide contents of white ginseng powder were increased after extrusion treatment of which EWG at $140^{\circ}C$ barrel temperature had higher value than EWG at $100^{\circ}C$ barrel temperature. Free radical scavenging activity of EWG at $140^{\circ}C$ barrel temperature was 80.2 and 45.6% respectively. The butanol fraction of polyphenolic compound and acidic polysaccharide were $27.2{\pm}0.1\;mg/g$ and $217.6{\pm}0.7\;mg/g$, respectively. The ginsenosides were quantified by HPLC and the yield of ginsenoside-Rg3s and Rg3r were achieved by extrusion process.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.5
• /
• pp.899-904
• /
• 2004

The objectives of the experiment were to examine the effects of extrusion process variables on the yield of extruded ginseng extract and to determine the effect of ratio of extruded ginseng extract and microcrystalline cellulose on characteristics of spheronized granules by cold extrusion-spheronization process. Extrusion process variables observed were feed moisture (15, 22, 29%), die temperature (90 110 13$0^{\circ}C$) and screw speed (150 200, 250 rpm). The results showed that moisture content of dried ginseng significantly affected extraction yield (P<0.05). The less moisture content of the feed resulted in the higher yield of the extract. Moisture content of 15%, screw speed of 250 rpm and die temperature of 13$0^{\circ}C$ gave the highest yield of ginseng extract. Mean extraction yield of extruded ginseng using hot water extraction was greatly improved by extrusion process The extract yield of extruded ginseng was 43.5% which was higher than that of red ginseng (38.3%) and white ginseng (29.0%) produced by traditional process. It was possible to make from the mixture of microcrystalline cellulose (200 g) mixed with different concentration of 200 mL solution (0, 5, 20, 30 40 50 60% of ginseng extract with 59.2% dry solid) by using cold extrusion spheronization. When the concentration of ginseng extract Increased, the granulation yield was improved but friability and compression index were reduced. Ginseng extract such as saponin was completely released from spheronized granules in distilled water within 10 min. It can be concluded that spheroniged granule with ginseng extract could be packed in gelatin capsule since granules Possessed proper physical properties and quick release of saponin.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.7
• /
• pp.951-957
• /
• 2009

In this study, antibacterial activity of extruded ginseng extract by 60 and 80% Et-OH were investigated by agar diffusion assay against two bacteria causing dental caries (Streptococcus mutans and Lactobacillus casei). Extrusion conditions were 20% moisture content $100^{\circ}C$ and $140^{\circ}C$ barrel temperature. The inhibition effect of 60% Et-OH ginseng extract was higher than 80% Et-OH ginseng extract. The minimum inhibitory concentration (MIC) of 80% Et-OH extruded ginseng extract at 140 and $100^{\circ}C$ barrel temperature against L.casei were 100 and 150 mg/mL respectively using broth assay method. The amount of glucosyltransferase (GTase) inhibitory content was the highest in extruded ginseng at $140^{\circ}C$ barrel temperature with 60% Et-OH. Moreover, n-hexane and n-butanol fraction ginseng extract had potential against tested bacteria. Our results demonstrated that antibacterial activities of extruded ginseng extract at $140^{\circ}C$ barrel temperature were more effective than Ex-$100^{\circ}C$, RG and WG.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.9
• /
• pp.1211-1218
• /
• 2007

The aim of this study was to compare the fermentability and characteristics of fermented broths for white ginseng, red ginseng and extruded white ginseng at $110^{\circ}C$ (A), $120^{\circ}C$ (B) and $130^{\circ}C$ (C). The scanning electron microphotograph of B and C was uniform aircell distribution, but A had increased pore size and exploded some aircell's wall. Saccharification rate constant of C was the highest (10.123 $mg/mL·hr^{1/2}$). Fermentation temperature was $27^{\circ}C$ for 30 days and the cultivation was fixed with Saccharomyces cerevisiae, Aspergillus usamii, and Rhizopus japonicus. The pH of red ginseng fermented broth was 3.79, which was the highest among the fermented samples. The fermented broth of B had the highest acidity (4.46%). The fermented broth of A had the highest reducing sugar content in ginseng suspensions (32.36 mg/mL). In ginseng fermented broths, reducing sugar content was decreased rapidly during the initial 5 days and alcohol content was increased during the initial 5 days. On the fifth day, the fermented broth of C showed the highest alcohol content (5.20%).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.6
• /
• pp.921-927
• /
• 2015

The aim of this study was to investigate the effect of die temperature and repeated extrusion on physical properties of extruded white ginseng (EWG). The die temperature was adjusted to 100, 120, and $140^{\circ}C$, and extrusion was repeated under the same conditions with their corresponding samples. Specific mechanical energy input decreased as die temperature increased during extrusions. The secondary extruded white ginseng (SEWG) at a die temperature of $120^{\circ}C$ showed a higher expansion index than other extrudates. Elevation of both die temperature and repeated extrusion increased the specific length of extrudates. The highest apparent elastic modulus, breaking strength, and water solubility index obtained from SEWG at a die temperature of $100^{\circ}C$ were $7.53{\times}10^8N/m^2$, $7.49{\times}10^5N/m^2$, and 39.02%, respectively. When die temperature increased, water absorption index (WAI) decreased. The WAI of SEWG was higher than that of EWG. In conclusion, repeated extrusion affected physical properties of white ginseng and could be applied to produce improved quality of ginseng products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.1109-1113
• /
• 2005

The objective of this study was to determine the effect of extrusion temperature on puffing of white and red ginseng powder. The extrusion variables were feed material (red and white ginseng powder) and die temperature $(100\;and\;115^{\circ}C)$. The analyzed characteristics of ginseng extrudates were sectional expansion index, microstructure and rheological properties. Most of biopolymer was highly puffed at higher extrusion temperature, but the cross-sectional expansion of white and red ginseng powder was higher at 1000e and longitudinal expansion seems to higher at $115^{\circ}C$. White and red ginseng powder were puffed inconsistently and discontinuously at $115^{\circ}C$. The scanning electron microphotograph of extruded white ginseng was uniform air cell distribution at 100oe, but pore size increased at $115^{\circ}C$ and had fine uniformity due to pore explosion. White ginseng and its extrudate were pseudoplastic. Intrinsic viscosity was lower as a result of increased die temperature. The cross-sectional expansion seems to be inconsistent and decreased due to decrease in melt viscosity at $115^{\circ}C$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.2
• /
• pp.258-264
• /
• 2014

This study investigated the effects of die temperature and repeated extrusion on the chemical components and antioxidant properties of extruded white ginseng (EWG). Die temperature was adjusted to 100, 120, and followed by repeated extrusion under the same conditions with corresponding samples. Secondary extruded white ginseng (SEWG) at a die temperature of $120^{\circ}C$ had the highest acidic polysaccharide content of all extrudates. Increasing die temperature and repeated extrusion both increased crude saponin content of the extrudate. Ginsenoside Rh1 was detected in the EWG ($140^{\circ}C$) and SEWGs, whereas ginsenosides Rg3s and Rg3r were only detected in SEWG ($140^{\circ}C$). The highest total phenolic content, DPPH radical scavenging activity, and reducing power obtained from SEWG ($140^{\circ}C$) were $8.55{\pm}0.03$ mg/g, $72.05{\pm}0.63%$, and $0.80{\pm}0.004$, respectively. In conclusion, repeated extrusion increases antioxidant activity and crude saponin contents for the development of improved ginseng products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.9
• /
• pp.1179-1186
• /
• 2009

This study was carried out to investigate the effect of saengmaec-san on the level of blood glucose and serum components in streptozocin (STZ)-induced diabetic rats. The experimental groups were divided into normal group (normal), diabetic control group (Dia-control), 10% saengmaec-san (white ginseng) group (DA), 10% saengmaec-san (fermented white ginseng) group (DB), 10% saengmaec-san (fermented red ginseng) group (DC), 5% saengmaec-san (extruded and fermented white ginseng) group (DDL), 10% saengmaec-san (extruded and fermented white ginseng) group (DDH). The body weight after induction of diabetes was 85.4% in the Dia-control group compared with the normal group. But in the DA group, the body weight showed clear sign of recovery almost normal level after administration of saengmaec-san for two weeks. The food efficiency ratios (FER) were 5.94% in the normal group. But it was significantly decreased in the Dia-control group (0.58%). All the treatment groups showed increase of FER compared with the Dia-control group. The level of blood glucose was significantly increased in the STZ-induced diabetes groups but it was decreased in all the treatment groups after administration for 2 weeks. Serum creatinine level were significantly higher in the STZ-induced diabetes groups and after administration of saengmaeg-san for 2 weeks while the level of serum creatinine was decreased 33.3% in the DB group. After administration of saengmaec-san for two weeks, serum total cholesterol level were significantly lower in all treatment groups than the first day of the total cholesterol level. The level of serum triglyceride was increased in all the treatment groups compared with the first day of triglyceride level. The level of serum HDL-cholesterol, after STZ-induced diabetes, was decreased in all treatment groups but particularly in the DDL and DDH groups increased HDL-cholesterol level compared with the first day of the saengmaec-san administration. Compared with the beginning of experiment, Atherogenic index (AI) were significantly decreased in all treatment groups than the Dia-control group and showed clear sign of recovery almost normal level. These results suggested that the saengmaec-san could be developed as an antidiabetic agent.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.544-548
• /
• 2005

The objective of this study was to determine the effect of die temperature and dimension on extraction pattern, extract yield, and crude saponin content of extruded white ginseng. The extrusion variables were die temperature $(110\;and\;120^{\circ}C)$ and die dimension (3 holes with 1.0 mm, 2 holes with 2.0 mm, and 1 hole with 3.0 mm diameter). The browness and redness were indicator of active components in ginseng extract. Both were used to evaluate the effect of die temperature and die dimension on release pattern and release rate constant. Browness and redness of extract achieved its lowest value at die temperature $110^{\circ}C$ and 2 holes with 2.0 mm diameter, indicating the lowest extraction rate constant. Extract yield highly increased by extrusion treatment. Extract yield and crude saponin content were the highest at die temperature $120^{\circ}C$ and 1 hole with 3.0 mm diameter. In conclusion, extrusion process has contributed significantly in improvement of release rate of its active components.