• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.796-805
• /
• 2020

Purpose: A static loading test was performed to evaluate the ultimate flexural strength of a girder in which 80MPa high-strength concrete was synthesized on the compressive flange of the I-shape steel girder. Method: This test is designed and fabricated two types of specimens with different shear-connection specifications, and evaluated their ultimate flexural behavior until reaching the extreme event limit states. In addition, the ultimate strength was evaluated by comparing the test results and the results of the strain compatibility method. Result: By confirming the displacement within 0.02mm as a result of the relative slip measurement, it was verified that the two specimens secured perfect bonding. Therefore, the difference in the shear specification does not have a great effect on the stiffness, and if the specimens are completely synthesized, there is no difference in the behavior until it reaches the extreme-event limit states. Conclusion: The girder to be tested has a working load within the elastic range and meets the usability requirements for allowable deflection. Therefore, even if a part of the casing is subjected to the tensile force at the level of cracking, the deck will first reach the compression failure due to the role of the reinforcing bar.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.2 s.31
• /
• pp.193-204
• /
• 1997

In order to quantify the relationships of the important physical factors relating failure to strong earthquake loading, the plastic fatigue problems for structural components under repeated loading were reviewed first. A new concept of very low cycle fatigue failure for structural components under severe cyclic excitations as in strong earthquakes was represented. Also, an experimental study was made of the very low cycle fatigue failure of structural steel elements. It was attempted to realize the ultimate failure in the course of loading repetitions of the order of several to twenty. The test specimen had a form of rectangular plate, representing a thin-plated element in a steel member as wide-flange cross section. It was subjected to uniaxial loading repeatedly, until complete failure takes place after undergoing inelastic buckling, plastic elongation and/or their combination. It was seen as a result that the state of the ultimate failure is closely related to the maximum strain at the extreme fiber in the cross section.

• Korean Journal of Microbiology
• /
• v.53 no.4
• /
• pp.242-250
• /
• 2017

Actinobacteria tolerating extreme conditions can be a rich source of bioactive compounds and enzymes. In this study filamentous actinobacteria were isolated from soils of Ulleung Island, and their physiological properties were examined. Soil samples were collected, serially diluted and spread on various agar media. The average viable counts of total bacteria were $1.28{\times}10^7CFU/g$ for soil sample 1 (ULS1) and $2.05{\times}10^7CFU/g$ for soil sample 2 (ULS2). As a result, 34 strains of actinobacteria were isolated and assigned to the genera Streptomyces (16 strains), Isoptericola (5 strains), Rhodococcus (4 strains), Agromyces (3 strains), Micrococcus (2 strains), Arthrobacter (1 strain), Williamsia (1 strain), Microbacterium (1 strain), and Oerskovia (1 strain) based on 16S rRNA gene sequence analysis. Enzyme activity and plant growth promoting potential were tested for representative isolates. Multiple strains of Streptomyces degraded starch, casein and Tween 80. As for plant growth promoting potential, strains of Oerskovia, Williamsia, Isoptericola, and Streptomyces solubilized phosphate, and those of Agromyces, Oerskovia, Micrococcus, Rhodococcus, Streptomyces, and Isoptericola produced 3-indole-acetic acid (IAA), respectively. Selected strains of Streptomyces exhibited strong antagonistic activity against Staphylococcus aureus and Bacillus subtilis as well as Candida albicans. This study confirms that actinobacteria from Ulleung Island can be a good source of novel bioactive compounds.

• Structural Engineering and Mechanics
• /
• v.72 no.5
• /
• pp.569-583
• /
• 2019

Tubular steel sections are widespread all over the world because of their strength and aesthetic appearance. Tubular steel members may exhibit local buckling such as elephant foot or overall buckling under extreme compression load. Recently, external bonding of fiber reinforced polymers (FRP) sheets for strengthening these members has been explored through experimental research. This paper presents three-dimensional nonlinear finite element analysis (FEA) to investigate the structural behavior of strengthening tubular steel members with FRP against local and overall buckling phenomena. Out-of-roundness and out-of-straightness imperfections were introduced to the numerical models to simulate the elephant foot and overall buckling, respectively. The nonlinear analysis preferences such as the integration scheme of the shell elements, the algorithm for solution of nonlinear equations, the loading procedure, the bisection limits for the load increments, and the convergence criteria were set, appropriately enough, to successfully track the sophisticated buckling deformations. The agreement between the results of both the presented FEA and the experimental research was evident. The FEA results demonstrated the power of the presented rigorous FEA in monitoring the plastic strain distribution and the buckling phenomena (initiation and propagation). Consequently, the buckling process was interpreted for each mode (elephant foot and overall) into three sequential stages. Furthermore, the influence of FRP layers on the nonlinear analysis preferences and the results was presented.

• Journal of Applied Biological Chemistry
• /
• v.50 no.2
• /
• pp.46-51
• /
• 2007

Lipases are industrially useful versatile enzymes that catalyze numerous different reactions. Among lipases functioning under extreme conditions, alkaline lipase is useful in detergent industry. Lipase from yeast strain Yarrowia lipolytica NRRL Y-2178 was most active under alkaline condition, and initial medium pH for most lipase production was also alkaline [Lee et al., 2007, J Microbiol Biotechnol, 17(6)]. High lipase production was achieved using Y. lipolytica NRRL Y-2178. Optimal incubation time for lipase production at $25^{\circ}C$ was 72 h. Optimal temperature, when incubated for 72 h, was $27.5^{\circ}C$. Lipase production but not cell growth was very sensitive to concentrations of glucose and glycerol as efficient carbon sources, showing optimal concentrations of 1.0 and 1.5% (w/v), respectively. Lipase production was highly stimulated by $Ca^{2+},\;K^+,\;and\;Na^+$, but was inhibited by $Co^{2+},\;Cu^{2+},\;Mn^{2+},\;Na^+,\;and\;Fe^{2+}$. Maximum lipase production at 0.1 mM $Ca^{2+}$ for 72 h incubation at $27.5^{\circ}C$ was 649 units/mL.

• ALGAE
• /
• v.17 no.2
• /
• pp.117-125
• /
• 2002

Five microalgal species isolated from the Jeju coast and four microalgal stock strains in hatchery were cultured in order to investigate their adapation to extreme changes in environmental factors such as salinity, water temperatue, adn nutrients. In case of salinity variation, Nitzschia sp. of Bacillariophyceae, Isochrysis galbana of Haptophyceae and Tetraselmis gracilis of Prasinophyceae showed optimum growth at the low salinity of 20 and 25 psu. Amphora coffeaeformis and Chetoceros simplex of Bacillariophyceae, and Pavlova lutheri of Haptophyceae adapted well at the relatively high salinities of 30 and 35 psu. However Phaeodactylum tricornutum of Bacillariophyceae and Chlorella sp. of Chlorophyceae showed euryhaline property In case of water temperature variation, most of all the species studied wer inhibited at 10℃. C. simplex, Nitzschia sp., p. tricornutum, Chlorella sp. and T. gracilis grew well at above 20℃. A. coffeaeformis, I. galbana and P. lutheri adapted also at the high temperature of 30℃. Each microalgal strain showed different growth rates and its maximum biomass. Generally microalgal populations from the Jeju coast grow well in relatively high salinity and high water temperature. Their growth were inhibited at low water temperature, but not likely affected at low salinity. This study indicates that the microalgal populations could not be affected by abnormally low salinity phenomena, which have happened occasionally around the west Jeju coast in summer and have led macrobenthic animals to mass mortality.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.4
• /
• pp.1-8
• /
• 2020

Mechanical components that support structures in aerospace and power generation industries require high-strength materials. Particularly, in the aerospace industry, aluminum alloys, titanium alloys, and composite materials are increasingly used due to their high maneuverability and durability to withstand low temperature extreme environments; however, ultra-high-strength steel is still used in key components under heavy loads such as landing gears. In this paper, the fault cause analysis and troubleshooting of aircraft parts made of ultra-high-strength steel (300M) broken during normal operation are described. To identify the cause of the defect, a temporary inspection of the same aircraft was performed, and material testing, non-destructive inspection, microstructure examination, and fracture area inspection of the damaged parts were performed. Fracture analysis results showed that a crack in the shape of a branch developed from the tool mark in the direction of the intergranular strain. Based on the results, the cause of fracture was confirmed to be stress corrosion.

• Ocean Systems Engineering
• /
• v.3 no.2
• /
• pp.97-122
• /
• 2013

For the optimization design and strength evaluation of the umbilical cable, the calculation of cross section stress is of great importance and very time consuming. To calculate the cross section stress under combined tension and bending loads, a new integrated analytical model of umbilical cable is presented in this paper. Based on the Hook's law, the axial strain of helical components serves as the tensile stress. Considering the effects of friction between helical components, the bending stress is divided into elastic bending stress and friction stress. For the former, the elastic bending stress, the curvature of helical components is deduced; and for the latter, the shear stress before and after the slipping of helical components is determined. This new analytical model is validated by the experimental results of an umbilical cable. Further, this model is applied to estimate the extreme strength and fatigue life of the umbilical cable used in South China Sea.

• Advances in concrete construction
• /
• v.1 no.4
• /
• pp.289-304
• /
• 2013

A reliable concrete constitutive material model is critical for an accurate numerical analysis simulation of reinforced concrete structures under extreme dynamic loadings including impact or blast. However, the formulation of concrete material model is challenging and entails numerous input parameters that must be obtained through experimentation. This paper presents a damage scale analytical model to characterize concrete material for its pre- and post-peak behavior. To formulate the damage scale model, statistical regression and finite element analysis models were developed leveraging twenty existing experimental data sets on concrete compressive strength. Subsequently, the proposed damage scale analytical model was implemented in the finite element analysis simulation of a reinforced concrete pier subjected to vehicle impact loading and the response were compared to available field test data to validate its accuracy. Field test and FEA results were in good agreement. The proposed analytical model was able to reliably predict the concrete behavior including its post-peak softening in the descending branch of the stress-strain curve. The proposed model also resulted in drastic reduction of number of input parameters required for LS-DYNA concrete material models.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.659-672
• /
• 2020

The outbreak of a recent strain of Coronavirus, known as 'COVID-19', has spread sharply from China across the globe, resulting in a dramatic recession in the global economy. This uncertainty has therefore negatively influenced the business perspective and the various formulated strategies that may not considered such [extreme] circumstances. Using baseline analysis and archival data, this paper reports some of the major implications of COVID-19 on global business and strategy and puts forward suggested research agenda as potential future directions for organizations. In order to survive and remain sustainable, this paper argues that businesses need to revisit their strategies during current COVID-19 crises from three perspectives, including supporting human resources financial commitment, forming cross-functional teams and connecting with their supply chains, as well as investing in corporate social responsibility and doubling down efforts with regard to partnerships. The study also represents a preliminary analysis to the implications of COVID-19 on the business and strategies across the globe and is considered the first such in the field of business, as to date all research papers on COVID-19 have been published in medical-related journals. Directions for future research are also proposed at the end of this study.