• Analytical Science and Technology
• /
• v.14 no.2
• /
• pp.103-108
• /
• 2001

Rare earth elements(REE) were separated by solvent extraction with tri-n-butyl phosphate(TBP) and $NaNO_3$, followed by back extraction with water. The method was applied to the determination of REE to circumvent the spectral interferences of ICP-AES analysis. The effects of the $NaNO_3$ concentration and the addition of hydrophobic solvents on the extraction efficiencies were investigated. Increases of the $NaNO_3$ concentration enhanced the extraction efficiencies of REE, and more than 95% recoveries were obtained at 5M of $NaNO_3$ concentration. On the other hand, addition of hydrophobic solvents lowered the extraction efficiencies. The method was applied to determine the REE in the monazite sample. But the precisions of the analytical results were more than 20%.

• Resources Recycling
• /
• v.24 no.5
• /
• pp.80-86
• /
• 2015

The separation of In from the synthesis solution with Ga, Fe, and Al has been studied by the solvent extraction using D2EHPA as an extractant. The effects as a function of the concentration of extractant and HCl on the extraction of In were investigated. The extraction of In and Ga increased with decreasing HCl concentration, but that of Fe and Al was independent. Separation factor between In and Ga of 115 was obtained at 1.0 M D2EHPA in the presence of 0.5 M HCl of feed solution. Consequently, this study shows that D2EHPA is suitable extractant for In extraction from the synthesis solution. Extraction efficiency and separation factor could be increased by controlling HCl and extractant concentration.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.5
• /
• pp.973-979
• /
• 1999

Volatile compounds from twigs, needles and sprouts in Pinus densiflora were extracted with n hexane, diethyl ether or ethanol for 24 hours, and the extracted compounds were separated and identified by gas chromatography and mass selective detector. The kinds and amount of volatile compounds extracted from three parts of Pinus densiflora were different in solvent extraction and the extraction by the modified Liken Nickerson apparatus. The contents of volatile compounds of twigs contained more than those of needles and sprouts, and the volatile compounds were extracted more in n hexane than the others. In the extraction with hexane, the main volatile compounds of twigs were 18.5% pinene, 14.5% limonene, 12.7% pinene and 3.2% myrcene. Sprouts were 16.8% limonene, 4.4% pinene, 4.3% pinene and 1.7% myrcene. Needles contained 14.7% pinene, 5.4% pinene, 2.2% limonene and 0.8% myrcene. The highest yield for pine aroma was shown in the extraction from pine twigs with n hexane, and in this extraction the amounts of pinene, pinene and limonene were 742 g, 1108 g and 922 g per gram sample, respectively.

• Resources Recycling
• /
• v.21 no.6
• /
• pp.3-11
• /
• 2012

Some methods used for the recovery of osmium and ruthenium from primary/secondary sources are reviewed. Both Ru and Os could form volatile oxides which enable their separation from the other PGMs by distillation as a traditional method. In hydrochloric acid solution, they also form chloro-complexes with different valence states. Amines or amine based mixture have been used to extract Ru. Solvating extractants are employed to separate Ru and Os. The detailed extraction and stripping conditions of several solvent extraction processes have been reviewed. As an alternative to solvent extraction, solid-liquid method can be applied to recover trace amount of these metals.

• Korean Journal of Organic Agriculture
• /
• v.20 no.1
• /
• pp.91-99
• /
• 2012

This study was conducted to develop a functional feed additive for pig with spent $Lycium$ $chinense$ Mill fruit. We investigated the optimum conditions for the extraction of polyphenol from spent $Lycium$ $chinense$ Mill using methanol. Methanol concentration as a solvent for extraction, extraction time and the volume of solvent per a gram of solid (ground spent Lyceum chinense Mill) were selected as parameters. Three levels of parameters were configured according to Box Behnken experiment design, a fractional factorial design, and total 15 trials were employed. Total polyphenol concentration from each trial was used as response from experiment system and effects of parameters on total polyphenol extraction efficiency were determined using response surface model. As a result, all terms in analysis of variance, regression ($p$ = 0.001), linear ($p$ = 0.002), square ($p$ = 0.017) and interaction ($p$ = 0.047) was significant and adjusted determination coefficient ($R^2$) was 94.7%. Total polyphenol extraction efficiency was elevated along increased methanol content and decreased solvent to solid ratio. However extraction time did not affect the efficiency. This study provides a primary information for the optimum extraction conditions to maximize total polyphenol recovery from spent Lycium chinens Mill fruit and this result could be applied to re-use of argo-industrial by-products and to develop of functional feed additives in organic farming.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.1
• /
• pp.28-32
• /
• 2023

We optimized ultrasound-assisted extraction to improve the extraction efficiency of bioactive compounds from the microalgae Acutodesmus reginae. To optimize this extraction process, we investigated the effects of solvent type, solvent concentration, extraction time, extraction number, and extraction power on the production of lutein, α-carotene, β-carotene, and chlorophylls a, and b. After sequential optimization of these main variables, the maximum amount of each compound was extracted at 30℃ with an ultrasound power of 80 W and using 99.5% methanol. Under these optimum conditions, the amount of lutein, α-carotene, β-carotene, and chlorophylls a, and b, were measured as 10.43, 8.66, 3.76, 15.43, and 6.39 mg/g dry matter respectively.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.6
• /
• pp.426-432
• /
• 2001

Perstractive fermentation is a good way to increase the productivity of bioreactors. Us-ing Propionibacteria as the model system, the feasibility of using supported emulsion liquid mem-brane(SELM) fro perstractive fermentation is assessed in this study. Five industrial solvents were considered as the solvent for perparing the SELM. The more polar a solvent, is the higher the par-tition coefficeint However, toxicity of a solvent also increases with its polarity. CO-1055(indus-trial decanol/octanol blend)has the highest partition coefficient toward propionic acid among the solvents that has no molecular toxicity toward Propionibacteria, A preliminary extraction study was conducted using tetradecane as solvent in a hydrophobic hollow fiber contactor. The results confirmed that SELM eliminates the equilibrium limitation of conventional liquid-liquid extrac-tion and allows the use of a non-toxic solvent with low partition coefficient.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.499-503
• /
• 1995

In order to study how and why the stabilities of lanthanoid(III) complexes in solutions vary across the series, the formation constants of the adducts of tris(2-thenoyltrifluoroacetonato)lanthanoids(III) with seven carboxylic acids in chloroform have been determined by solvent extraction technique at 298K. The formation constants with carboxylic acids generally decrease with increasing the atomic number, but in the middle of the series, they change only slightly. Such trends have been interpreted as related to a change of the coordination number in the middle of the series. It has been attempted to determine the number of water molecules coordinated to the adducts as well as $Eu(TTA)_3$ in chloroform by measuring the fluorescence life time of europium(III), to ensure the assignment of the coordination number.

• Analytical Science and Technology
• /
• v.30 no.1
• /
• pp.20-25
• /
• 2017

An analytical method for determining potential endocrine disruptors (bisphenol A, 2-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, pentachlorophenol, p-t-butylphenol, p-pentylphenol, p-hexylphenol, p-t-octylphenol, p-heptylphenol, nonylphenol) by solid-phase extraction (SPE) and High Perfomance Liquid Chromatography(HPLC) equipped with fluorescence and variable wavelength detector has been developed. The SPE process for sample concentration was performed on a commercially available Oasis HLB cartridge packed with polymeric sorbents. The effect of elution solvent and elution volume on the recoveries of the analytes were investigated with HPLC. Average recovery of >85% was achieved with 60mg sorbents using 5mL of methanol as elution solvent. Phenolic compounds in canned drinks, beverages and water samples were surveyed by this proposed method.

• Journal of the Korean Dietetic Association
• /
• v.4 no.1
• /
• pp.14-19
• /
• 1998

This study was designed to investigate the role of onion as a natural antioxidant. Onion was distinguished as yellow onion peel and onion flesh. Onion samples were extracted with 5 different kinds of solvents such as water, 70% ethanol, 99.9%ethanol, 99.9% methanol, and 96% butanol in order to select optimal extraction solvents, In this part of study linoleic acid was used s an model system for the purpose of determining the antioxidant activities. The optimal extraction rate of various solvents containing onion samples was determined by measuring extraction yield, electron donating ability(EDA), thiobarbituric acid(TBA), and thiocyanate, which are common methods for measuring activity. As a result 70% ethanol was shown as the most effective solvent.