• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2023년도 임시총회 및 춘계학술대회
• /
• pp.42-42
• /
• 2023

Paeonia lactiflora roots (PLR) are a traditional medicinal plant used to treat inflammatory diseases. Recently, PLR has been reported to increase the secretion of immune regulatory factors and enhance phagocytic activity in macrophages. Therefore, in this study, we compared the macrophage activation induced by PLR under different extraction conditions. PLR extracts at temperatures ranging from 4℃ to 60℃ increased the secretion of immune regulatory factors, but the secretion slightly decreased at 80℃. Under time-based extraction conditions at 60℃, immune regulatory factor secretion by PLR extracts was similar from 1 to 24 hours. Therefore, considering the overall results of this study, extracting PLR at 60℃ for 1 hour is considered the optimal condition for macrophage activation.

• 자원리싸이클링
• /
• 제26권1호
• /
• pp.37-42
• /
• 2017

이산화탄소 저감을 위한 유효한 방법 중의 하나로 칼슘규산염 광물의 간접탄산염화 공정이 보고되고 있다. 이 공정은 염산, 질산 등의 산에 의하여 칼슘규산염으로부터 칼슘성분을 침출하는 단계와 이산화탄소에 의한 침출용액의 탄산염화 단계의 두 과정으로 구성된다. 침출용매로 초산수용액을 사용하는 경우에는 침출용액을 이산화탄소로 탄산염화 하는 과정에서 초산이 재생성 되어 침출단계로 순환되어 침출용매로 재사용될 수 있다. 제철 및 제강슬래그와 같은 산업부산물은 칼슘규산염을 많이 함유하고 있어 간접탄산염화공정의 원료로 사용될 수 있다. 본 연구에서는 초산수용액에 의한 국내 전기로제강슬래그의 침출효율을 조사하기 위하여, 초산수용액 농도, 침출온도 및 침출시간 등의 침출조건 변화에 따른 침출실험을 수행하였다.

• 한국식품영양학회지
• /
• 제35권1호
• /
• pp.62-73
• /
• 2022

Omija seed oil was extracted from Omija seeds, a by-product of Omija, using an eco-friendly pressed extraction method. Physicochemical properties and antioxidant activities of 12 extracts using different combinations of seed moisture content (5, 7.5, and 10%) and extraction temperature (25, 49, 75, and 100℃) were then investigated. The highest extraction yield was 31.33% at moisture of 5% and temperature of 75℃. The lowest acid value was 4.18±0.25 at moisture of 5% and temperature of 49℃or moisture of 7.5% and temperature of 25℃. Peroxide value, iodine value, and saponification value were the lowest at 0.64±0.56 meq/kg, 159.38± 6.03, and 57.60±9.40, respectively, at moisture of 5% and temperature of 25℃. The content of total polyphenolics was the highest at 4,413±125 mg TAE/100 g when the moisture content was 10% and the extraction temperature was 25℃. DPPH radical scavenging activities of oil extracts at 20~100 mg/mL were 28.68±7.30~87.65±2.20%. The maximum antioxidant activity and IC₅₀ were 87.65±2.20% and <20 mg/mL, respectively, for extract obtained at moisture of 10% and temperature at 100℃. As a result, the extraction yield, acid value, peroxide value, iodine value, saponification value, and so on were excellent at moisture content of 5% and extraction temperature of 25℃ or 49℃. However, the content of total polyphenolic compounds and antioxidant activity were the highest at moisture of 10% and extraction temperature of 100℃. In conclusion, extracting Omija seed oil from Omija seeds, a by-product of Omija, is effective with a pressed extraction method.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.119.1-119.1
• /
• 2014

Toxic waste disposal: Many people think that when toxic waste is dumped into the ocean or into the air, it disappears. This belief is incorrect. Rather than disappearing, it accumulates over time and slowly destroys the environment. Ultimately, it leads to the destruction of human race. Plasma is environmentally friendly: Plasma is environmentally friendly because it is created and disappears. When plasma is formed on the earth, you need certain conditions such as accelerating electrons by an electrical discharge or a particle accelerator. When this is gone, plasma completely disappears, leaving no impact on the environment. Plasmas produce radicals: Even if plasma density is low at atmospheric pressure, many radicals (excited states of molecules) are created. These radicals are chemically very aggressive. So instead of using harmful chemicals, plasma can be utilized for less of an impact on the environment. Plasma can reach very high temperatures: Plasma is also useful because when you control the density, you can easily reach high temperatures up to $5000{\sim}6000^{\circ}C$ at atmosphere pressure. Because of this heat and the chemical aggressiveness of the plasma, there are many green applications for plasma technology. Pulsed power technology: Pulsed electric field for extraction, drying and killing bacteria. Treatment of biological tissue by pulsed electric fields: Extraction of substances from cells: Sterilisation, Medical applications, Growth stimulation, Food preparation. Each application has its specialities, especially with respect to pulse shape and electric field strength.

• 동아시아식생활학회지
• /
• 제16권1호
• /
• pp.107-112
• /
• 2006

This study analyzed the changes of chlorophyll and ascorbic acid contents according to the extraction temperatures and the number of soakings using five kinds of Korean and Japanese green tea(3 kinds of green tea and 2 kinds of tea bag) which were obtained from local markets in Korea and Japan. The findings are as follows: 1. The chlorophyll contents of Japanese green tea were $2\sim3$ times higher than those of Korean green tea. 2. The chlorophyll contents of Korean green tea in high and middle grades were increased with increasing temperature $(80>70>60^{\circ}C)$ but the contents in low grade were increased with decreasing temperature. The contents of chlorophyll in Japanese green tea were almost similar in low, middle and high grades. 3. Ascorbic acid content was higher in low grade Korean green tea but it was higher in high and middle grades of Japanese green tea. Chlorophyll contents of Japanese green tea were higher than those of Korean green tea but ascorbic acid contents of Korean green tea were higher than those of Japanese green tea.

• 열처리공학회지
• /
• 제5권2호
• /
• pp.111-121
• /
• 1992

For the purpose of investigating the effect of austenitizing temperatures on the mechanical properties of 0.23% C-13.6%Cr martensitic stainless steel, tensile properties, hardness, impact value and carbide extraction were examined after changing the austenitizing temperatures and tempering temperatures. The results obtained are summerized as follows. The carbide laminations formed from hot rolling before austenitization could not be eliminated after austenitizing at $950^{\circ}C$. With increasing austenitizing temperature, hardness increased and showed maximum value at $1050^{\circ}C$ and then slightly decreased. With increasing tempering temperature up to $500^{\circ}C$, impact value and elongation appeard to be decreased but hardness showed nearly unchanged at austenitizing temperature of $1150^{\circ}C$ due to the fine $M_7C_3$ carbides precipitation. The abrupt increase in impact value, hardness and elongation above the tempering temperature of $500^{\circ}C$ appeared to change in carbide structure from fine $M_7C_3$ to coarse $M_{23}C_6$.

• 한국식품영양학회지
• /
• 제28권5호
• /
• pp.766-773
• /
• 2015

This study analyzes the chemical composition of green tea, white tea, yellow tea, oolong tea and black tea with respect to extraction temperature and time. The optimum extraction conditions for these teas were determined by assessing the chemical composition of tea brewed at different temperature (50, 60, 70, $80^{\circ}C$) and extraction times (1, 3, 5, 10 minute). Catechins contents were the largest at 5 minutes and generally declined by 10 minutes. Green tea catechins contents were highest when brewed at $70^{\circ}C$ and besides other teas a change of the trend variation at 70 and $80^{\circ}C$. These temperatures did not extract theaflavins in green tea. Extract temperature and time did not significantly affect theaflavins content of white tea, yellow tea, and oolong tea. Black tea, however, was noticeably dependent on extract conditions, which were most effective at $70^{\circ}C$, brewed for 5 minutes. Caffeine content of green tea, yellow tea, and oolong tea was highest at 5 minutes, but temperature did not appear to affect the content. White tea and black tea caffeine content was highest when brewed at $70^{\circ}C$ for 5 minutes. Theobromine content of green tea, yellow tea, oolong tea, and black tea did not show major differences between the study times or temperature, though the content in white tea increased with higher temperatures when brewed for 5 minutes. The extraction of phenolic compounds increased until 5 minutes, and showed not further increase at 10 minutes. Antioxidant capacity of green tea, white tea, and yellow tea were maximized at $70^{\circ}C$ for 5 minutes or $80^{\circ}C$ for 3 minutes, while oolong and black tea were reached maximum antioxidants at $70^{\circ}C$ for 5 minutes. In general, to optimize the beneficial chemical content of brewed tea, a water temperature of $70^{\circ}C$ for 5 minutes is recommended.

• 한국약용작물학회지
• /
• 제26권1호
• /
• pp.1-7
• /
• 2018

Background: Rehmanniae radix preparata (RRP) has been used as a traditional medicine and is one of the most important oriental herbal medicines. However, the physical characteristics of RRP are not suitable for use in industry. The present study was under-taken to determined the preparation method of RRP powder and the physicochemical characteristics of RRP powder by milling under different pre-freezing temperatures. Methods and Results: Moisture content, powder yield, particle size, bulk density, compressive stress, extraction yield, and 5-HMF content of PRR powders by milling with pre-freezing temperatures (-20, -40, -60, and $-80^{\circ}C$) were analyzed, and correlation among these factors was determined. Powder yield increased and particle size decreased in a pre-freezing temperature-dependent manner from -20 to $-60^{\circ}C$. The Hausner ratio increased from 1.186 to 1.225 with decreasing temperature from -20 to $-80^{\circ}C$, whereas compressive stress showed the opposite trend. Extraction yield and 5-HMF content were not significantly different between RRP powder. Significant correlations were observed among pre-freezing temperature and physical characteristics (e.g., yield, particle size, Hausner ratio, and compressive stress). Conclusions: These results suggest that the pre-freezing temperature is an important factor affecting the physical characteristics of PRR powder and applicable to the industrial production of RRP powder.

• 한국식품영양과학회지
• /
• 제20권6호
• /
• pp.603-608
• /
• 1991

고추의 효율적인 이용의 방안으로서 고추 oleoresin추출조건의 구명(究明)과 저장중인 품질변화에 대해서 실험하였다. 고추 oleoresin의 최적 추출용 매로는 사용한 8가지 용매중에서 acetone이 가장 좋았으며, 분쇄한 건조고추의 입자크기는 100 mesh, 시료중량에 대한 용매의 혼합비율은 1 : 3(w/w) 및 추출온도는 $25^{\circ}C$에서 가장 효과적으로 추출되었다. 추출수율을 기준으로 적정 추출시간은 5시간이였으며, 이상의 최적 추출조건에서의 oleoresin 수율은 18.7%였다.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.469-478
• /
• 2022

Tritium was extracted from tritium-contaminated aluminum samples by heating it in a high-temperature furnace at 200, 300, or 400 ℃ for 15 h. The extracted tritium was analyzed by using a liquid scintillation counter (LSC); the sample thicknesses were 0.4 and 2 mm. The differences in tritium extraction over time were also investigated by cutting aluminum stick samples into several pieces (1, 5, 10, and 15) with the same thickness, and subsequently heating them. The results revealed that there are most of the hydrated material based on tritium on the surface of aluminum. When the temperature was increased from 200 or 300 ℃-400 ℃, there are no large differences in the heating duration required for the radioactivity concentration to be lower than the MDA value. Additionally, at the same thickness, because the surface of aluminum is only contaminated to tritiated water, cutting the aluminum samples into several pieces (5, 10, and 15) did not have a substantial effect on the tritium extraction fraction at any of the applied heating temperatures (200, 300, or 400 ℃). The proportion of each tritium-release materials (aluminum hydrate based on tritium) were investigated via diverse analyses (LSC, XRD, and SEM-EDS).