• Journal of Environmental Science International
• /
• v.16 no.1
• /
• pp.39-44
• /
• 2007

This study was conducted to investigate the contents of residual solvents and mineral components(11 kinds) in ginseng extracts with different extracting conditions(5 types) and commercial ginseng extract products(domestic, imported). Fine root was extracted with solution having various ethanol concentration after hexane treatment. Among 5 type extracts, residual solvent(hexane) was detected ginseng extracts treated ethanol mixed with hexane. But extracts that dried after soaked in hexane wasn't detected hexane. Mineral components(Al, Mn, Fe, Cu and Zn) were detected in fine root and 5 types of extracts. The contents of mineral components between fine root and extracts with various extracting conditions were similar, however, extracts that dried after soaked in hexane showed the lower amount in Al, Fe, Pb than the others. In comparison with commercial ginseng ex-tract products(domestic, imported), the distribution pattern of mineral was similar but the contents were a little different.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.3
• /
• pp.406-412
• /
• 1998

Such extraction conditions as the kinds of solvent, extracting temperature, extracting time, ratio of material to solvent and particle size of material, were studied to maximize the extraction of oleoresin from chipi. Larger amount of soluble solids were extracted from seeds with nonpolar solvents (hexane, pentane, ether) for extraction, because the seeds contained large amount of crude fats and monoterpene(limonene) volatile compounds. Larger amount of soluble solids were extracted from peel with polar solvents(methanol, ethanol) of extraction because of large amount of water soluble colors, sugars and oxygenated terpene bolatile compounds in the peel. The application of the solvents in intermediate polarity (dichloromethane, acetone) resulted in more effective extraction of soluble solid and volatile compounds. Expecially, dichloromethane was an excellent solvent in extraction of volatile compounds. In the concern of volatile compound recovery yield, the optimum extraction conditions, such as temperature, time, mixing ratio of material to dichloromethane and mean particle size, were $25^{\circ}C$, 10min, 1:10(w/v), 355~250${\mu}{\textrm}{m}$ for chopi peels and 3$0^{\circ}C$, 10min, 1:8(w/v), 355~250${\mu}{\textrm}{m}$ for chopi seeds, respectively.

• Journal of Environmental Health Sciences
• /
• v.25 no.3
• /
• pp.103-107
• /
• 1999

Even if odorous compounds remain very low concentration in water, it cause strong odor. Because Geosmin and most of odorous compound had very low vaporization, those were difficult to analyze with GC/MSD and Purge & Trap. So, we needed pre-treatment method for decreasing amounts of extracting solvents, improving recovery efficiencies and increasing analytical efficiencies. This study developed efficient technology for analyzing odorous compounds, using various adsorbents and extracting solvents. The optimum adsorbent was XAD resins. Especially, XAD-2, XAD-7 and XAD-2010 were superior, but XAD-2 of these and the optimum extraction solvent is MTBE. Other extraction solvents' efficiency is in order of MTBE>Dichloromethane>n-Hexane>Diethylether. The optimum NaCl dosage for increasing efficiency is 5 g in liquid-liquid extraction method. The shaking time(0~24hr) has no concern with adsorption efficiency. The optimum adsorbent is XAD-2 resin and extraction solvent is MTBE. Dosing NaCl, adsorption efficiency is increased in liquid-liquid extraction method, but NaCl has no effect on liquid-solid extraction method. In this experimental results, this algae toxins(Mycrocystin, Anatoxin etc.).

• Korean Journal of Environmental Biology
• /
• v.21 no.3
• /
• pp.245-250
• /
• 2003

Composition of isoflavone in cotyledon and hypocotyl of soybean were detected using HPLC. Optimum conditions for extracting isoflavone from hypocotyl were studied as well. Contents of isoflavone in soybean cotyledon and hypocotyl were 482.5 mg 100 $g^{-1}$ and 3453.3 mg 100 100 $g^{-1}$, respectively. Hypocotyl contained 7~8 times move isoflavone than corresponding cotyledon of the soybean. Malonyl glycoside accounted for move than 70% of the total isoflavone, followed by glycoside, acetyl glycoside, and aglycone. Aqueous ethanol of 60~80% was the most suitable solvent for extracting isoflavone from the hypocotyl. Optimum temperature and time was $90^{\circ}C$, 1hr. Acetic acid, NaCl, and NaOH added to 80% ethanol suppressed extraction yield of the phytochemieal.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.1
• /
• pp.73-77
• /
• 1993

This study was intended to investigate the effects of solvents, particle size of a sample, sample to solvent ratio, temperature and time on the extraction of garlic oleoresin. Among eleven solvents used for oleoresin extraction from garlic, the optimal solvent was methyl alcohol. The most appropriate particle size of garlic, extracting temperature and mixing ratio of garlic to methyl alcohol were 20mesh, $25^{\circ}C$ and 1 to 3(w/w), respectively. On the basis of yield in oleoresin extraction, optimum extracting time was about 4 hours. The yield of oleoresin under the above-mentioned conditions was 21.3%. "L" and "b" as color appearance were decreased, whereas "a"was increased slightly during 60 days storage at 5$^{\circ}C$, $25^{\circ}C$ and 4$0^{\circ}C$. Changes in the pyruvate content showed close relation to pH value. During storage pyruvate content of garlic oleoresin was decreased as increasing storage temperature.

• Journal of Food Hygiene and Safety
• /
• v.10 no.3
• /
• pp.139-145
• /
• 1995

In order to develop a natural food preservative, the root bark of Morus alba was extracted with several solvents, and then antimicrobial activity was investigated. The optimum extracting condition for the antimicrobial substance from the sample, minimum inhibitory concentration (MIC) of the extracted substance against microorganisms were also examined. The antimicrobial activity of the ethanol extract form the sample was stronger than those of the extracts by the other solvents such as water, methanol. ethyl acetate and acetone. The optimum extracting condition for antimicrobial substance from the sample was shaking extraction twice for 5 hours at room temperature in case of 7 times of absolute ethanol added to the crushed root bark of Morus alba. The ethanol extract from the root bark of Morus alba had strong B. cereus, L. monocytogenes and S. aureus. Especially, Bacillus species was the most susceptible to the extracted substance. The ethanol extract showed antimicrobial activity against Gram negative bacteria(MIC, 160~1600 ug/ml) and yeasts(MIC, 1600 ug/ml) such as C. albicans and S. acidifaeciens. The extract also showed growth inhibition against molds such as A. niger, A. parasiticus, A versicolar and T. viride.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.6
• /
• pp.603-608
• /
• 1991

To improve the utilization of red pepper, the extracting conditions of oleoresin, such as kind of solvents, particle sizes of a sample, sample to solvent ratios, extraction temperatures and times, were studied. Among eight solvents used for oleoresin extraction from red pepper, the optimal solvent was acetone. The most appropriate particle size of red pepper powder, extracting temperature and mixing ratio of red pepper to acetone were 100 mesh, $25^{\circ}C$ and 1 to 3(w/w), respectively. The basis of yield in oleoresin extraction, optimum extracting time was about 5 hours. The yield of oleoresin under the above-mentioned conditions was 18.7%.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1996.10a
• /
• pp.68-69
• /
• 1996

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.6
• /
• pp.1001-1007
• /
• 1994

In order to develop a natural food preservative, dried salviae miltiorrhizae radix (Salvia miltiorrhiza) was extracted with several solvents, and then antimicrobial activity was investigated. The optimum extracting condition for the antimicrobial sustance from the sample, minimal inhibitory concentration (MIC) of the extracted substance against microorganisms were also examined. Antimicrobial activity of the initial ethanol extract from the sample was the strongest compared to those of other solvent extracts such as n-hexane, acetone, butanol, methanol and water. the optimum extractingcondition for antimicrobial substance from the sample was shaking extraction for 2 hours at room temperature incase that 10 volumes of absolute ethanol was added to crushed Saliva Miltiorrhiza. The ethanol extract had strong growth inhibition activity against Gram-positive Bacteria (MIC, 3.13-50$\mu\textrm{g}$/ml) such as B. cereus, B, subtilis, L. minocytogenes, S. aureus, Sc. Mutans. Among Grampositive bacteria tested, Bacillus species was the most susceptibile to the extracted substance. The antimicrobial activity of the ethanol extract from the sample was weak to Gram -negative bacteria yeasts, for example MIC for Gram-negative bacteria and yeasts was 0.8mg/ml and 0.4-0.8mg/ml , respectively.

• Journal of Life Science
• /
• v.9 no.5
• /
• pp.575-580
• /
• 1999

Even if odorous compounds remained very low concentration in water, it caused strong odor. Because Geosmin and most of odorous compound had very vaporization, those were difficult to analyze with GC/MSD and Purge & Trap. So, we needed pre-treatment method for decreasing amounts of extracting solvents, improving recovery efficiencies and increasing analytical efficiencies. This study developed efficient technology for analyzing odorous compounds, using various adsorbents and extracting solvents. The optimum adsorbent was XAD resins. Especially, XAD-2, XAD-7 and XAD-2010 were superior, but XAD-2 of these and MTBE was the optimum extraction solvent. Other extraction solvent's efficiency was in order of MTBE>Dichloromethane>n-Hexane>Diethylether. The optimum NaCl dosage for increasing efficiency was 5g in liquid-liquid extraction method. The shaking time(0∼24hr) had no concern with adsorption efficiency. The optimum adsorbent was XAD-2 resin and extraction solvent was MTBE. Dosing NaCl, adsorption efficiency was increased in liquid-liquid extraction method, but NaCl has no effect on liquid-solid extraction method. In this experimental results, this method will apply to not only Geosmin but other well-known odorous compounds (2-MIB, IBMP, IPMP, TCA) and algae toxins (Mycrocystin, Anatoxin etc)