• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.1
• /
• pp.110-118
• /
• 2009

The PB/MC-CDMA(Partial Block Multi Carrier Code Division Multilple Access) system can improve the performance by reducing the ICI(Inter-Code Interference) between users. Also, this system can achieve the frequency diversity gain by avoiding ISI(Inter Symbol Interference). Therefore, the performance of PB/MC-CDMA system is better than that of conventional MC-CDMA(Multi Carrier Code Division Multiple Access) system. However, similarly to other multi-carrier systems, it still has a PAPR(Peak to Average Power Ratio) issue. In this paper, we propose a peak power reduction technique involving optimized spreading code selection without side information for the PB/MC-CDMA. The PB/MC-CDMA system in each block of units reuses the code so the extra code will be remained. This extra code is divided into several groups to calculate the PAPR and solving the PAPR problem by transferring the selected code which has minimum peak power.

• 한국연소학회:학술대회논문집
• /
• 2004.06a
• /
• pp.207-214
• /
• 2004

Extra heavy vacuum residue oil has advantage as the fuel of a power plant in reducing the cost of power generation. Numerical study is conducted by the KIVA code to understand combustion, heat transfer and flow field characteristics in the test reactor. The combustion model of pulverized coal particles is adopted as the combustion process of extra heavy oil is similar to that of coal. As an initial phase of investigation parametric study is performed with respect to SMD and spray angle of injected spray droplets.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1408-1414
• /
• 2015

The renewable energies such as photovoltaic power, wind power and biomass have grown to a greater extent as decarbonization techniques. The renewable energies are interconnected to power systems (or electrical grids) in order to increase benefits from economies of scale, and the extra attention is focused on the Grid Code. A grid code defines technical parameters that power plants must meet to ensure functions of power systems, and the grid code determined by considering power system characteristics is various across the country. Some TSO (Transmission System Operator) and ISO (Independent System Operator) have issued grid code for wind power and the special requirements for offshore wind farm. The main purpose of the above grid code is that wind farm in power systems has to act as the existing power plants. Therefore wind farm developer and wind turbine manufacturer have great difficulty in grasping and meeting grid code requirements. This paper presents the basic understanding for grid codes of developed countries in the wind power and trends of those technical requirements. Moreover, in grid code viewpoint, the active power control of wind power is also discussed in details.

• The KIPS Transactions:PartA
• /
• v.14A no.1 s.105
• /
• pp.31-38
• /
• 2007

Code Optimization is converting to a code that is equivalent to given program but more efficient, and this process is processed in Code Optimizer. This paper designed and processed Code Optimizer Generator that automatically generates Code Optimizer. In other words Code Optimizer is automatically generated for DFA Pattern Matching which finds the optimal code for the incoming pattern description. DFA Pattern Matching removes redundancy comparisons that occur when patterns are sought for through normalization process and improves simplification and structure of pattern shapes for low cost. Automatic generation of Code Optimization for DFA Pattern Matching eliminates extra effort to generate Code Optimizer every time the code undergoes various transformations, and enables formalism of Code Optimization. Also, the advantage of making DFA for optimization is that it is faster and saves cost of Code Optimizer Generator.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10c
• /
• pp.263-266
• /
• 2007

We introduce a vision-based hand gesture recognition fer understanding musical time and patterns without extra special devices. We suggest a simple and reliable vision-based hand gesture recognition having two features First, the motion-direction code is proposed, which is a quantized code for motion directions. Second, the conducting feature point (CFP) where the point of sudden motion changes is also proposed. The proposed hand gesture recognition system extracts the human hand region by segmenting the depth information generated by stereo matching of image sequences. And then, it follows the motion of the center of the gravity(COG) of the extracted hand region and generates the gesture features such as CFP and the direction-code finally, we obtain the current timing pattern of beat and tempo of the playing music. The experimental results on the test data set show that the musical time pattern and tempo recognition rate is over 86.42% for the motion histogram matching, and 79.75% fer the CFP tracking only.

• International Journal of Aeronautical and Space Sciences
• /
• v.1 no.2
• /
• pp.17-21
• /
• 2000

In order to correct the strut interference in wind tunnel tests, image methods are conventionally used. Because of their excessive extra runs, some alternatives have been tried to reduce the extra runs. In this study, these alternatives were reviewed and checked by the strut interference evaluation with the panel code, CMARC. The present work shows that the strut interference is free from neither model configuration nor model attitude. This dependency makes the alternatives to the image method unfeasible. The 3-run image method was also evaluated. It worked well even for the exaggerated windshield. At this point, reducing the image runs by neglecting parameters affecting minor influence would be best.

• Wind and Structures
• /
• v.15 no.2
• /
• pp.177-188
• /
• 2012

The meteorological events that cause most strong winds in Brazil are extra-tropical cyclones, downbursts and tornadoes. However, one hurricane formed off the coastline of southern Brazil in 2005, a tropical storm formed in 2010 and there are predictions that others may form again. Events such as those described in the paper and which have occurred before 1987, generate data for the wind map presented in the Brazilian wind loading code NBR-6123. This wind map presents the reference wind speeds based on 3-second gust wind speed at 10 m height in open terrain, with 50-year return period, varying from 30 m/s (north half of country) to 50 m/s (extreme south). There is not a separation of the type of climatological event which generated each registered velocity. Therefore, a thunderstorm (TS), an extra-tropical pressure system (EPS) or even a tropical cyclone (TC) are treated the same and its resulting velocities absorbed without differentiation. Since the flow fields generated by each type of meteorological event may be distinct, the indiscriminate combination of the highest wind velocities with aerodynamic coefficients from boundary layer wind tunnels may lead to erroneous loading in buildings.

• Journal of the Microelectronics and Packaging Society
• /
• v.5 no.2
• /
• pp.53-58
• /
• 1998

Sintering and dielectric characteristics of substrates were estimated by mixing rate of alumina and potashborosilicate glass(PBSG) powders. PBSG powders were used 7761(corning code)and alumina powders were used in extra pure rate(99.9%) and had 0.1 ${\mu}$m mean size. After ball milling with organic additives green sheets which were casted by doctor blade machine were sintered at 800$^{\circ}C$ for 1∼3hrs. Microstructure, linear shrinkage and dielectric constant of substrates were surveyed in order to fabricate low-dielectric and low tem-perature sintering substrate.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.130-135
• /
• 2017

Normally, in data transmission, extra parity bits are added to the input message which were derived from its input and a pre-defined algorithm. The same algorithm is used by the receiver to check the consistency of the delivered information, to determine if it is corrupted or not. It recovers and compares the received information, to provide matching and correcting the corrupted transmitted bits if there is any. This paper aims the following objectives: to use an alternative error detection-correction method, to lessens both the fixed number of the required redundancy bits 'r' in cyclic redundancy checking (CRC) because of the required polynomial generator and the overhead of interspersing the r in Hamming code. The experimental results were synthesized using Xilinx Virtex-5 FPGA and showed a significant increase in both the transmission rate and detection of random errors. Moreover, this proposal can be a better option for detecting and correcting errors.

• Journal of Communications and Networks
• /
• v.12 no.1
• /
• pp.1-4
• /
• 2010

As a countermeasure to simple power attack, the unified point addition codes for the elliptic curve cryptosystem were introduced. However, some authors proposed a different kind of power attacks to the codes. This power attack uses the observation that some internal operations in the codes behave differently for addition and doubling. In this paper, we propose a new countermeasure against such an attack. The basic idea of the new countermeasure is that, if one of the input points of the codes is transformed to an equivalent point over the underlying finite field, then the code will behave in the same manner for addition and doubling. The new countermeasure is highly efficient in that it only requires 27(n-1)/3 extra ordinary integer subtractions (in average) for the whole n-bit scalar multiplication. The timing analysis of the proposed countermeasure is also presented to confirm its SPA resistance.