• Journal of Navigation and Port Research
• /
• v.42 no.4
• /
• pp.245-252
• /
• 2018

A method of transmitting an alert signal in case of man-overboard (MOB) systems in a small fishing vessel navigating within coastal area is being operated as VHF-DSC equipment via a distress alert button and V-P ass Equipment via alert button or beacon separation. However, a small fishing vessel with a couple of crews on board is an inappropriate way to alert a man-overboard condition. However, internationally, MOB equipment using VHF-DSC, AIS, and Bluetooth technologies is used to transmit alert signals directly to the mother ship and other radio stations. In order to analyze the performance and technology of the MOB equipment operating in foreign countries, it was confirmed that the alarm signal can be received within a maximum of one nautical mile when the MOB device is on the water surface. An MOB device that meets domestic conditions needs to send an alarm signal to a station within the VHF communication range. However, in order to reduce the false alert signal, it is most appropriate to operate the VHF-DSC radio equipment installed on the ship remotely. Analysis of various technologies connecting the MOB and the VHF-DSC revealed that the Bluetooth system has advantages such as device miniaturization. When an emergency signal is transmitted from the MOB device, it can be received by a dedicated receiver and recognized through an external input terminal of the VHF-DSC equipment generating its own alarm. If the emergency situation cannot be processed at the mother ship, a distress alert is sent to all radio stations via VHF-DSC for response under emergencies faced by small fishing vessels.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.2
• /
• pp.124-134
• /
• 2005

To investigate the exposure effect of polynuclear aromatic hydrocarbons (PAHs), we measured airborne total PAHs as an external dose, urinary 1-hydroxypyrene (1-OHP) as an internal dose of PAHs exposure, and analyzed the relationship between urinary 1-OHP concentration and PAHs exposure. The study population contained 44 workers in steel-pipe coating and paint manufacture industries. The airborne PAHs was obtained during survey day, and urine were sampled at the end of shift. Personal information on age, body weight, height, eniployment duration, smoking habit, and alcohol consumption was obtained by a structured questionnaire. Airborne PAHs were analyzed by the gas chromatograph with mass selective detector. Urinary 1-OHP levels were analyzed by the high performance liquid chromatograph with ultraviolet wavelength detector. For statistical estimation, t-test, ${\chi}^2$-test, analysis of variance, correlation analysis, arid regression analysis were executed by SPSS/PC (Windows version 10). The mean of environmental total PAHs was $87.8{\pm}7.81{\mu}g/m^3$. The mean concentration ($526.5{\pm}2.85{\mu}g/m^3$) of workers in steel-pipe coating industries using coal tar enamel was the higher than that ($17.5{\pm}3.36{\mu}g/m^3$) of workers in paint manufacture industries using coal tar paint. The mean of urinary 1-OHP concentration ($51.63{\pm}3.144{\mu}\;mol/mol$ creatinine) of workers in steel-pipe coating industries was the higher than that ($2.33{\pm}4.709{\mu}\;mol/mol$ creatinine) of workers in paint manufacture industries. The mean of urinary 1-OHP concentration of smokers was the higher than that of non-smokers. There was significant correlation between the urinary concentration of 1-OHP and the environmental concentration of PAHs (r=O.S48, p<0.001), pyrene(r=0.859, p<0.001), and urinary cotinine (r=0.324, p<0.05). The regression equation between the urinary concentration of 1-OHP in ${\mu}g/g$ creatinine($C_{1-OHP}$) and airborne concentration of PAHs (or pyrene) in ${\mu}g/m^3$ ($C_{PAHs}$ or Cpyrene) is: Log ($C_{1-OHP}$)=-0.650+0.889×Log($C_{PAHs}$), where $R^2=0.694$ and n=38 for p<0.001.Log ($C_{1-OHP}$)=1.087+0.707${\times}$Log(Cpyrene), where $R^2=0.713$ and n=38 for p<0.001. From the results of stepwise multiple regression analysis about 1-OHP, significant independents were total PAHs and urinary cotinine (adjusted $R^2=0.743$, p<0.001). In this study, there were significant correlation between the urinary concentration of 1-OHP and the airborne concentration of PAHs. The urinary 1-OHP was effective index as a biomarker of airborne PAHs in workplace. But it was influenced by non-occupational PAHs source, smoking.

• Radiation Oncology Journal
• /
• v.11 no.1
• /
• pp.97-102
• /
• 1993

A retrospective analysis of various characteristics in 32 limited stage small cell lung cancer patients treated at the Department of Therapeutic Radiology in Kangnam St. Mary's Hospital, Catholic University Medical College from April 1983 to September 1991, was carried out to identify factors which had prognostic significance for survival from initiation of radiation therapy. There were 26 men and 6 women. Median age was 63 years (range: 24-78 years). The follow up duration was 1.5 to 44 months (median: 9 months). External radiation therapy was done with daily 160-180 cGy,5 fraction/week, total of 1000-6660 cGy (median: 4500 cGy) to the mediastinum by 6 MV linear accelerator. Of 32 Patients, 27 ($84.4{\%}$) patients were treated with combined modality (chemotherapy plus radiation therapy), and 5 ($15.6{\%}$) patients were treated with radiation therapy only. Complete responders were 12 patients ($37.5{\%}$), partial responders were 11 ($34.4{\%}$), and no responders were 9($28.1{\%}$). Karnofsky performance status over 70 (p<0.04), chemotherapy regimen (CAV, PV, and CAV+PV) (p<0.04),6 or more cycles of chemotherapy (p<0.007), radiation therapy over 4500 cGy (p<0.03), and radiation therapy responder (CR+PR) (p<0.003) showed a significantly favorable influence on 1 year survival rate. Age (p=0.545), sex (p=0.666), presence of superior vena cava syndrome (p=0.719), prophylactic cranial irradiation (p=0.217), and radiation therapy duration (p=0.491) had no effect on survival. Radiation induced side effects were transient esophagitis in 11 ($34{\%}$), general weakness in 9($28{\%}$), gastrointestinal symptoms in terms of nausea, vomiting and indigestion in 5 ($15{\%}$) and leukopenia in 1 ($3{\%}$).

• Korean Security Journal
• /
• no.18
• /
• pp.73-99
• /
• 2009

There are three assassination and treatening cases in this thesis introduced as analysis data. They are shooting accidents of the U.S.A's President Reagun (1981,3.30), and the President Park Jeong Hee of South Korea(1974.8.15), assassination of the Prime Minister Lavin of Israel (1995.11.4) In March 30, 1981, there was an accident where criminal, Hinckley, fired ball cartridges right before the President Reagan got into the car to move to White House after completing the announcement of Hilton Hotel of Washington. As a result, the chest of president was shot and public information secretary and safeguard were wounded. In August, 15, pm 10:23, where the 29th 8.15 independent anniversay event was being celebrated by the people at the National theater in Jangchungdong, Seoul, the criminal Moon Sekwang fired ball cartridges, he failed to assassinate the President Park Jeong Hee of Korea, but shot the First lady Yuk Young Soo. She was wounded right part of head and died. In November 4, Saturday, pm 22:00 the Prime Minster Lavin had finished the supporting event of Middle Asia's Peace project and was taking on the car when he was killed by the criminal Amir's shooting, The accidents left very important lesson from the aspect of security analysis and it has been frequently used as a material for the education and training of safeguard organization. In Korea, as well as Presidential Security Service, national security departments have selected it as an important model for the subjects such as 'Security Analysis, 'Security Practice' and 'Security Methodology'. In the performance of security duty, security skill is the most important matter. Moreover, it has a close relationship with politics, society and culture. The purpose of this study is to analyze and reevaluate the case, which has been treated as a usual model from the aspect of security analysis, beyond its introduction. Attempted assassination of President Reagan was evaluated as a positive success example because of its rapid response of adjacent guards to evacuate Reagan, who is a guard target, within 10 seconds after the shot. When comparing it to President Kennedy Assassination of 1963, it was evaluated that guards were significantly specialized. In the study, however, it was possible to found many problems such as carelessness of guard, who is in charge of external area of event place, idle attitude for frequently used event place, confusion of wireless communication, risk of wireless security disclose, insufficient provision of compulsory record file, insufficient profiling of dangerous person and unsecured hospital and first-aid room.

• Journal of Animal Science and Technology
• /
• v.51 no.4
• /
• pp.337-342
• /
• 2009

The feasibility of reutilization of magnesium ammonium phosphate (MAP) or struvite slurry recovered from the process through microwave irradiation was studied in this experiment. For this purpose, 4 different operations were performed with or without Mg source addition and different levels of MAP recycled in a batch reactor. Dissolution rate of MAP, ${NH_4}^+$ elimination pattern and physicochemical changes of MAP during microwave irradiation were also studied. The result showed that only 33% orthophosphate ($PO_4-P$) and 27% $NH_4-N$ removal occurred without adding any external Mg source (run A), whereas 87% $PO_4-P$ and 40% $NH_4-N$ removed when 1.0 M ratio of $MgCl_2$ (run B) was added based on $PO_4-P$ in influent. Although the addition of 1.0 molar ratio of microwave irradiated MAP (Run C) removed lower $PO_4-P$ and $NH_4-N$ than 1.0 M $MgCl_2$ (run B), $PO_4-P$ removal was double when compared with no Mg addition (run A). Addition of half MAP and half $MgCl_2$ (run D) showed the similar removal efficiency (88% $PO_4-P$ and 35% $NH_4-N$) with sole $MgCl_2$ addition (run B). Based on these results, the reutilization of MAP irradiated by microwave would be a feasible way to enhance the removal efficiencies of N and P, as well as curtail the Mg chemical usage. Track study showed that $NH_4-N$ gradually increased at initial stage of microwave irradiation of MAP, and then started eliminating from liquor as temperature increased over $45^{\circ}C$. Dissolution rate of ${PO_4}^{-3}$ during microwave irradiation was proportional to the initial MAP concentration, having $0.0091x^{0.6373}$ mg/sec. It was found from the scanning electron microscope (SEM) study that physical structure of MAP crystal started breaking down into small cube granules within very short time by electromagnetic vibration force during microwave irradiation and then gradually melted down into solution.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.1-12
• /
• 2016

This study is to make the liquid crystalline structure using sucrose distearate (Sucro-DS) emulsifier to create the hydrophilic type oil-in-water (O/W) emulsion, the droplets of the emulsion having a structure of a multi-lamellar structure. We have studied the physicochemical properties of Sucro-DS using those techniques. And it has been studied in the emulsion performance. In order to form the liquid crystalline structure applying 3 wt% of Sucro-DS, 5 wt% of glycerin, 5 wt% of squalane, 5 wt% of capric/caprylic triglyceride, 3wt% of cetostearyl alcohol, 1wt% of glyceryl mono-stearate, 78 wt% of pure water in mixture having the lamellar structure of stable multi-layer system was found to formed. By applying them, they were described how to create an unstable active material encapsulated cream. Further, the moisturizing cream was studied using this technique. It reported the results to the skin improvement effect by the human clinical trials. The pH range to produce a stable liquid crystal phase using a Sucro-DS was maintained in 5.2~7.5. In order to increase the stability of the liquid crystal, it was when behenyl alcohol containing 3 wt%, the hardness at this time was 13 kg/mm,min. Viscosity of the same amount was 25,000mPas/min. After a test for the effects of the emulsions, the concentration of 6 wt% Sucro-DS is that was appropriate, the particle size of the liquid crystal was 4~6mm. It was observed through a microscope analysis, reliability of the liquid crystal changes for 3 months was found to get stable at each $4^{\circ}C$, $25^{\circ}C$ and $45^{\circ}C$. In clinical trial test, before applying a moisturizing effect it was $13.4{\pm}7%$. Moisturizing cream liquid crystal was not formed in $14.5{\pm}5%$. Therefore, applying than ever before could see the moisture about 8.2% was improved. On the other hand, it was the moisturizing effect of the liquid cream is $19.2{\pm}7%$. The results showed that 43.3% improvement than that previously used. Applications fields, Sucro-DS emulsifier used liquid cream, lotion, eye cream and a variety of formulations can be developed, as well as the cosmetics industry is expected to be wide fields in the application of the external preparation for skin emulsion technology in the pharmaceutical industry and pharmaceutical industry.

• Journal of Food Hygiene and Safety
• /
• v.29 no.4
• /
• pp.327-333
• /
• 2014

A method for analysis of five artificial sweetners (sodium saccharin, aspartame, acesulfame-K, sucralose, cyclamate) in beverage samples was developed using high-performance liquid chromatography/triple quadrupole mass spectrometry (HPLC/MS/MS). The method uses a single-step dilution for sample preperation. Seperation was achieved on a $C_{18}$ column ($2.1{\times}150mm$, $3.5{\mu}m$) with A- 2% methanol (1 mM ammonium acetate), B-95% methanol (1 mM ammonium acetate) as mobile phase with gradient mode. The quantitation of target compounds was performed by external calibration in selected reaction monitorning (SRM) mode. The coefficient of determination of calibration curve for sodium saccharin, aspartame, acesulfame-K, sucralose and cyclamate were 0.9957, 0.9991, 0.9943, 0.9982 and 0.9948, respectively. The limits of detection (LODs) and limits of quantitation (LOQs) were in the range of 0.001~0.022 mg/L and 0.004~0.073 mg/L, repectively. Recoveries for beverage samples were in the range of 92.76~113.50% with RSD < 10.91%. The method has applied to the determination of the five sweetners in 102 beverage samples. Three artificial sweetners-aspartame, acesulfame-K, sucralose were detected from 42 samples. Sodium saccharin and cyclamate were not detected in all samples.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.4
• /
• pp.188-205
• /
• 2001

Insurer's duty of declaration is based on reciprocity of principle of the highest good, and recently it is widely recognized in the British and American insurance circles. The conception of fiduciary relationship is no longer equity or the legal theory which is only confined to the nations with Anglo-American laws. Therefore, recognizing the fiduciary relationship as the essence of insurance contract, which is more closely related to public interest than any other fields. will serve an efficient measure to seek fair and reasonable relationship with contractor, and provide legal foundation which permits contractor to bring an action for damage against violation of insurer's duty of declaration. In the future, only when the fiduciary relationship is approved as the essence of insurance contract, the business performance and quality of insurance industry is expected to increase. Therefore, to keep well this fiduciary relationship, or increase the fiduciary relationship persistency rates seems to be the bottom line in the insurance industry. In this paper, we developed a fiduciary relationship maintenance ratio based on comparison by case, which is represented with usually maintained contract months to paid months, based on each contract of the basis point. In this paper we have developed a new business model seeking the maximum profit with low cost and high efficiency, management policy of putting its priority on its substantiality, as an improvement measure to break away from the vicious circle of high cost and low efficiency, and management policy of putting its priority on its external growth(expansion of market share).

• The Korean Journal of Air & Space Law and Policy
• /
• v.34 no.1
• /
• pp.159-201
• /
• 2019

Along with Annex 14 Volume I establishment in 1951 and the set-up of restriction surface around the runway, aeronautical technique and navigation performance achieved dazzling growth, and the safety and precision of navigation greatly improved. However, restrictions on surrounding obstacles are still valid for safe operation of an aircraft. Standards and criteria for securing safety of aircraft operating around and on airport is stated in Annex 11 Air Traffic Services and Annex 14 Aerodrome etc. In particular, Annex 14 Volume I presents the criteria for limiting obstacles around an airport, such as natural obstacles such as trees, mountains and hills to prevent collisions between aircraft and ground obstacles, and artificial obstacles such as buildings and structures. On the other hand, Annex 14 Volume I, in the application of the obstacles limitation surfaces, apply the exception criteria, as it may not be possible to remove obstacles that violate the criteria if the aeronautical study determines that they do not impair the safety and regularity of aircraft operation. Aeronautical study has been applied and implemented in various countries including United States, Canada and Europe etc. accordingly, Korea established and amended some provisions of the Enforcement rules of the Aviation Act and established the Aeronautical study guidelines to approve exceptions. However, because ICAO does not provide specific guidelines on procedures and methods of Aeronautical study, countries conducting aeronautical study have established and applied their own procedures and methods. Reflecting this realistic situation, at the 12th World Navigation Conference and at the 38th General Assembly, the contracting States demanded a reexamination of the criteria for current obstacle limitation surfaces and methods of aeronautical study, and the ICAO dedicated a team of experts to prepare new standard. This study, in line with the movement of international change in obstacle limitation surface and aeronautical study, aims to compare and analyze current domestic and external standards on obstacle limitation and height limits, while looking at methods, procedure and systems for aeronautical study. In addition, expecting that aeronautical study will be used realistically and universally in assessing the impact of obstacles, we would recommend the institutional improvement of the aeronautical study along with the development of quantitative analysis methods using the navigation data in the current aeronautical study.