• Archives of Plastic Surgery
• /
• v.32 no.2
• /
• pp.205-213
• /
• 2005

There are several characteristics of the nose of orientals. The dorsum of nose is flat and low, the skin is thick with severe tension, the nasal tip is bulbous, the nostril is wide, and the projection of the nose is limited due to a poorly developed alar cartilage with a short columella. In order to improve these untoward characteristics of the nose of Orientals aesthetically, plain augmentation of the dorsum and tip-plasty with conventional methods has been performed by many plastic surgeons. However these conventional rhinoplasty is not enough to obtain satisfactory results when transforming into a more beautiful and aesthetically charming appearance. In order to produce the optimal nasal shape and profile, it is extremely important to consider the aesthetic surgical factors, which are; the position of the nasion, the optimal nasolabial angle(95-100 degree in Orientals), the natural exposure of infra-tip lobule with and columella, the position of the tip defining point in harmony with the dorsal profile and the smooth and natural silhouette of the lateral nasal profile as it descends into the inferior portion of the nose. From April, 2003 to August, 2004, a total of 52 patients underwent open rhinoplasty, adhering to the strict aesthetic principles considered and described priorly. Surgical approach was done through a transcolumella incision and an alar rim incision. The nasal dorsum was augmented with a silicone implant and the shape of the columella and the nasolabial angle were finessed with a silicone strut implant which was placed in between the medial crurae in a manner of a non-visible graft. The nasal tip was corrected by alar cartilage suture technique and onlay graft of shield shaped Alloderm and Gore-Tex. Author obtained the optimal nasal shape and profile aesthetically, and the results, considered satisfactory in all patients without any complications, are as follows; 1. the average increase in nasal length was 2.5 mm, 2. the average decrease in nasal width was 2.1 mm, 3. the average increase in nasal tip projection was 3.2 mm, 4. the changes of nasolabial angles were from 85.5 degree to 94.7 degree, 5. the changes of the angle between the long axis of the external naris was from 101.3 degree to 89.5 degree. In conclusion, this surgical procedure is an effective, reliable and a valuable method in improving the nasal shape, tip projection, nasolabial angle and especially, the lateral facial profile of Orientals aesthetically.

• Journal of the Korean association of regional geographers
• /
• v.17 no.6
• /
• pp.710-725
• /
• 2011

The purpose of this study is to analyze both residential conditions and the resident impressions of the transition zone of central Daegu. The results drawn from a questionnaire survey of the residents are summarized as follows: 1) The proportion of people over the age of 60 living on a low income is high and consists mostly of retired citizens who have lived in the transition zone, in their own homes, for an extended length of time 2) The condition of infrastructure in the transition zone is very poor, however, despite the housing deterioration, the internal repair and maintenance of houses is more satisfactory than their external appearance. 3) Residential satisfaction received high ratings in every category except pollution and housing price. This response appears to stem from the easy commute of residents as well as the ready availability of facilities in the city center. 4) In terms of residential satisfaction, the residents can be divided into two groups. The first, with a high satisfaction rate, consists mainly of senior citizens who possess both personal homes and a stable living, having resided in the city center for most of their lives. The second, with a lower satisfaction rate, is composed mostly of younger residents who have lived temporarily in inexpensive rental homes. As a results, the residential area in the transition zone of central Daegu does not appear to be a problematic area like the slum of the West, but instead a stable settlement for its residents.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.2
• /
• pp.18-26
• /
• 2000

In order to improve the quality of Kamju(sikhae), Korean traditional sweat fermentated rice drink, Kamju made with laboratory fermenting from both covered barley malt and that added to commercial $\alpha-amylase$ and commercial sikhae can were investigated and analyzed ad follows 1. The amylase activities in L-malt(laboraory made malt), C-malt(commercial malt) were 25,065 units, 20,498 units at $60^{\circ}C$ and when heating at $60^{\circ}C$ for one hour their heat stability was getting lower and while at $70^{\circ}C$ after 2 hours both their heat stability was under 21%. 2. The external appearance, of all samples, in beating test, flipper, springer and leaker test were excellent and good valued. On the open test of sample can, head space was 7.9~9.0mm, net weight 247~250g, 432~435g, pH 4.96-5.76, Brix 13.2~14.0 and vacuum degree was 29~35cmHg. 3. The sucrose content of sample 1~5 was 8,57~10.01% highest ammount than sample 6(0.91%) 7(0.43%) and maltose content of sample 1~5 was 0.65~1.41% lower than 6 was 7.91% and 7 was 8,36%. The good traditional flavor texture and saccharides components content of glucose of sample 1~5 was 1.09~1.51, 6(3.86%), 7(3.97%), fructose content of sample 1~5 was 0.45~0.95%, 6(2.76%), 7(2.81%), maltotriose and raffinose of sample 1~5 were 0.04~0.291, 6(0.61%), 7(2.81%), and solid content of sample 1~5(3.1~3.8) was lower than 6(10.25%), 7(10.09%). 4. The result of sensory test as measured as lemone yellow of sample 6 and milky of sample 7, and weetness, flavor, color, traditional texture and sensory value for sample 1~5(3.1~3.8) was lower degree than that for 6(4.5), 7(4.0). 5. Among the heavy metals analyzed from sample cans, tin, iron and lead content for sample 1~5 were 31.95~36.71ppm, 5.84~6.39ppm and 0.075~0.09ppm while their content of sample 6.7, tin, 32.91ppm, 32.87ppm, iron 5.51ppm, 5.41ppm and lead, 0.074ppm, 0.079ppm.

• Journal of Sasang Constitutional Medicine
• /
• v.19 no.3
• /
• pp.30-50
• /
• 2007

1. Objectives Facial features are the important personal characteristics. As a study of all the standardization research about the morphology of face and head, this study was carried out to find the differences according to sex, age. 2. Methods We have collected 1140 cases of patients of the Sasang constitutional Department of Kyung-Hee Medical Center and Kangnam Kyung-Hee Oriental Hospital. we took pictures their frontal view, lateral view of face and measured height, breaths and projected length of face with Face Features Measurement Program(FFMP) and analyzed shape differences of face according to sex, age. 3. Results We got the morphologic characteristics of face according to sex, age. And we will upgrade the Sasangin Classification System by this Morphologic study of Head and Face. 4. Conclusions 1) The morphologic characteristics of face according to sex (1) A man's head is longer and wider than a woman's in most measurement. (2) A woman's eye is bigger in height than man's. (3) A woman's face is looked full-filled than man's. (4) A man's polion is higher than pupil but a woman's polion is lower than pupil. 2) The morphologic characteristics of face according to age (1) Young age's forehead is longer and higher than old age's. (2) Young age's eyebrow is wider than old age's (3) Young age's eye is bigger in height than old age's (4) Old age's nose is longer, wider and lower than young age's (5) Old age's ear is longer than young age's (6) Old age's bigonial breath is wider than young age's (7) Old age's low face is extinguished than you age's

• The Korean Journal of Zoology
• /
• v.26 no.4
• /
• pp.235-251
• /
• 1983

Several approaches have been made to access the mechanism of fusion in chick myoblast in vitro. Lactoperoxidase-catalyzed iodination was applied to labell cell surface proteins during myogenesis. Quantitative as well as qualitative changes were observed in $^131$I surface components of prefusion and postfusion cells. Two proteins with a molecular weight of 165K and 93K daltons were observed to appear at the onset of fusion as compared to prefusion stage. At the same time, 245K dalton protein decreased whereas the low molecular weight proteins increased consistently. The decrease of high molecular weight proteins appears to be associated with the cell cycle of myoblast during differentiation. The increased appearance of low molecular weight proteins might be due to the proteolytic cleavage of the high molecular weight proteins. Examination of intracellulr cAMP levels during fusion has revealed that a large but transient increase in cAMP occurs before the onset of fusion. This result suggests a causal relationship between the increase of cAMP and the onset of fusion, and further, that differentiating myoblasts are synthronized to a high degree. During the course of myoblast differentiation, at least four lowe molecular weight proteins, which different from major surface proteins iodinated, were identifiable in the culture medium. These proteins could be ascribed to be released from the membrane by proteolytic cleavage of surface proteins in the course of myoblast fusion. The significance of cell surface alterations and the released proteins during the fusion, the involvement of cAMP in the onset of fusion and the possibility that fusion is promoted by external factor(s) are discussed.

• Conservation Science in Museum
• /
• v.17
• /
• pp.55-68
• /
• 2016

Conservation and research efforts are currently underway at the National Museum of Korea on a series of artifacts excavated from Tomb No. 9 at Seogam-ri nearly a century ago by an archaeology team from the institution's colonialera predecessor. Among these objects are a number of bronze and gilt bronze buttons. The present study explores the production techniques used in making such buttons. Both bronze and gilt bronze buttons are hemispherical in shape and are similar in external appearance. However, their shanks differ significantly in size and cross-sectional shape, some with a round cross-section while others are square. The buttons, first sorted into two groups by each type of shank, were further subdivided by size. Analysis of round shanks has found variations in design and location as well as in shank thickness. In addition, the location where round shanks attach to buttons are usually irregular in surface. Square shanks, on the other hand, are more uniform in design and location. The shanks are typically located on the backs of buttons and attach to a groove which ostensibly serves to mark the correct position. X-ray imaging has revealed that round shanks have thick borders made from metal rather than dirt or other material. The buttons themselves appear to been cast using lost-wax technique. The ways in which each shank attaches to its respective button varies based on its cross-sectional shape.

• Food Science and Preservation
• /
• v.15 no.2
• /
• pp.225-230
• /
• 2008

We investigated the effect of modified atmosphere packaging (MAP) on the removal of astringency and overall quality of astringent persimmons (Diospyros kaki T. cv. Miryangbansi). Persimmons were packaged in 0.08, 0.10, or 0.12 mm low-density polyethylene film and then stored at $0^{\circ}C$ for up to 100 days. Concentrations of $O_2$ and $CO_2$ in the packaging maintained lower and higher as the film thickness increased Weight loss was strongly retarded by all three MAP films. Soluble tannin content decreased as the film thickness increased. The astringency of persimmons disappeared after 60-70 days in 0.12 mm film, after 80 days in 0.10 mm film, but did not disappear after 100 days in 0.08 mm film Loss of flesh firmness and decline in external appearance were slower in persimmons in 0.08 and 0.10 mm films than in those in 0.12 mm film. Our results show that 0.10 mm LDPE films can be effective for maintaining the quality and removal of the astringency of astringent persimmons.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.6
• /
• pp.498-510
• /
• 2001

Distraction osteogenesis refers to the biological process responsible for new bone formation between bone segments by gradual distraction after osteotomy. For the past several years, various inconveniences including a protracted consolidation period that requires patients to wear a distractor frame longer, as well as higher medical costs, have not been remedied by improvements in osteotomy, distraction rate and monitoring system. Furthermore, side effects such as pin tract infections and soft tissue swelling may arise due to the long treatment period. These drawbacks form the rationale of this study which purports to seek a method by which the consolidation period can be reduced. This paper examines how platelet-rich plasma(PRP), known to facilitate osteogenesis, influences bone formation when applied in distracted area. Ten mongrel dogs, which were made to wear external distractor frames after osteotomy in both sides of the mandible, were used as subjects. After a 7day period of latency, distraction was carried out at a rate of 1mm/day for 14 consecutive days. After the onset of distraction, 2ml of PRP and a mixture of calcium gluconate and thrombine were injected into the center of the distracted callus on the left side of the mandible. The left was injected with PRP while the right side was set as the control site without PRP treatment. Execution at the onset of distraction and in 2 weeks, 4 weeks and 8 weeks after the consolidation period, clinical and radiographic tests, bone mineral density examination, histological examination and histomorphometric analysis were conducted to compare both sides. The results are summarized as follows: 1. Based on the clinical examination at two weeks, more remarkable cortical bone formation was found on the buccal and lingual side of the distracted area in the PRP treatment site than in the control site. No visual difference was found between the PRP treatment site and the control site at four eight weeks. 2. Based on the radiological examination, a distinct increase in the radiopaque appearance of the PRP treatment site was revealed at two weeks, but this increase appeared to slow down at four and eight weeks. 3. Examination of bone mineral density revealed a significant difference at two weeks with the PRP treatment site yielding density two times higher than the control site. This difference lessened after four weeks, and disappeared at eight weeks. 4. The histomorphometric examination revealed that about 20% more bony trabeculae area(20%, higher) was formed in the PRP treatment site than in the control site. In conclusion, it can be said that PRPs effect on stimulating bone formation in the PRP treatment site manifest as early as two weeks. Trabeculae formation likewise increased throughout the whole period. If this result can be applied to humans, the consolidation period can be reduced by injecting PRP into the distracted area.

• Journal of architectural history
• /
• v.1 no.2 s.2
• /
• pp.68-84
• /
• 1992

The development of Buddhist architectures of the Unified Silla period have been generally understood to have paired pagoda instead of one which had been popular until before the unification. Besides the stylistic categorization of paired pagoda system, there had been no further investigation reported concerning whether there was any detailed process of change within the development of paired pagoda style. This paper aims to identify such change inside the development of paired pagoda style, which, externally, seems to be the same pattern of site design maintained throughout the period of Unified Silla that lasted for about three centuries. Since the temple sites of study are in the same pattern of layout, the method of investigation has to be such that can identify the subtle changes that, in external appearance, are not easily discernible. Hence, this research compared the dimensions of important measurement of five temple sites to be able to clarify the process of minor changes. Among many sites of Silla temples, only five were suitable for the research since detailed measurement were possible through field research or the report of excavation. They are the sites of Sachonwang-sa, Mangduk-sa, site of Kunsuri, and Bulguk-sa. Although the five sites have the same style of paired pagoda, it is clear that there were consistant flow of change. Even though the motivation of such change were not strong enough to change the site pattern itself, it resulted continuous minor changes such as the size and location of architectures. The size of image hall, for example, was growing larger and larger as time goes on, while, the size of Pagoda was getting smaller. In the same way, the size of middle gate became smaller while the size of lecture hall became larger, although the rate of change in these cases were not as severe as that of image hall and pagoda. At the same time, pagoda was coming closer to the middle gate leaving larger space in front of the image hall. Such aspect is even more meaningful considering the fact that the pagoda, from the 8th century in Japan and China, moved outside of the major precinct. The image hall, too, moved toward the middle gate slightly so that the space in front of the lecture hall became more spacious. Such changes, of course, were not accidental but they are the same continuous motivation of change that caused the changes before the period of unification. Enlargement of image hall and reduction of pagoda, for example, represent the changing relative importance of religious meaning. Hence, it is evident that one can not easily imterprete the development of one style only by categorizing it to be one same style. In the veiwpoint of the underlying motivation of change, the fact that one style persisted for a certain period of time, does not mean there had been no change, but means that it was the time of motivational accumulation, causing minor changes within the same style, to be able to create major change coming after.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.2
• /
• pp.165-179
• /
• 1993

Dicor has not been prescribed routinely, in spite of many advantages, because of esthetic limitations by excessive translucency and external shading. In an attempt to solve these problems, the technique of veneering Dicor by aluminous poreclain has been used and recently Dicor Plus system was developed. The purpose of this study was to evaluate the compatibility between Dicor and several veneering porcelains by measuring the shear bond strength and observing the failure mode and interface appearance with SEM. Total 55 Dicor disks(10.0mm diam. X 3.0mm thickness) were fabricated by lost wax technique and divided into five groups of 11. Veneering porcelains such as Dicor Plus, Vitadur Alpha, Vitadur N, Vivodent, and Ceramco II were built up over the center of the treated Dicor surface using paper tube(5.0mm diam. X 4.0mm height) and fired according to the manufacturesr’instructions. A representative sample from each group was completely embedded in epoxy resin and crosssectioned, and remaining 50 samples were embedded in epoxy resin with the bonded area perpendicular to table base. The shear bond strengths were measured by applying the shear load parallel to Dicor surface close to the bonded area. Failure modes and interface appearances were observed using SEM at 15 and 1000 magnification respectively. The obtained results were as follows : 1. The mean shear bond strengths showed Dicor-Dicor Plus(10.53 MPa); Dicor-Vitadur Alpha(8.84 MPa); Dicor-Vitadur N(7.37 MPa); Dicor-Vivodent(4.28 MPa); Dicor-Ceramco II(0.89 MPa). 2. The shear bond strength of Dicor-CeramcoII was significantly decreased compared with Dicor-Dicor Plus(p<0.01), but had no significant difference compared with Dicor-Vivodent(p>0.01). 3. The shear bond strengths of Dicor-Vitadur Alpha and Dicor-Vitadur N were not significantly different compared with Dicor-Dicor Plus(p>0.01). 4. SEM examination of bond failure modes revealed that Dicor-Dicor plus, Dicor-Vitadur Alpha, Dicor-Vitadur N exhibited cohesive failure within Dicor and Dicor-Vivodent exhibited adhesive failure. And Dicor-Ceramco III exhibited adhesive failure and cohesive failure within CeramcoIII together. 5. SEM examination of interfaces revealed that Dicor-Dicor Plus exhibited the most tight contact and Dicor-Vitadur Alpha, Dicor-Vitadur N exhibited acceptible contacts. But Vivodent exhibited discontinuous gap and Ceramco II exhibited large continuous gap.