• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.6
• /
• pp.27-37
• /
• 2019

This study focused on the possibility of reducing the cooling load through the change of micro climate in the outdoor space during summer season. This study proposes an efficient planning model by comparing the effects of urban heat island mitigation through wind path planning, outdoor space vegetation, and exterior material change by using the basic model of the street-oriented block housing proposed in the previous research by the same author. As a result, the most effective wind path planning strategy in the street-oriented block housing was the change of the air flow through the mass height adjustment. When the tall building masses were staggered and arranged in a balanced manner, the overall wind environment could be improved. The greater the height difference between low and high masses, the better the air flow was shown. It was also important to arrange the building masses so that the inlet of the main wind was open and to allow the external space to connect to the adjacent block to create a continuous flow. The change of outdoor space vegetation and flooring, and the formation of wind paths through the opening of lower part also showed the effect of heat island reduction. In addition, the change of PMV in summer was the biggest influence of shadow by tall building mass. Attention should be paid to the fact that high-albedo exterior materials are adversely affected by multiple reflections in dense street-oriented block housing. The use of albedo of the exterior material showed that it is necessary to pay attention to apply in the high density block housing. This is attributed to the rise of the temperature due to the absorption of energy into the low-albedo flooring, where the high-albedo exterior causes multiple reflections.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.4
• /
• pp.71-81
• /
• 2020

The purpose of this study is to propose the planning methods for pollution prevention in the initial design stage by identifying the pollution phenomena on the exterior of the building. It is important to catch the problem early on because exterior troubles begin with an initial design defect and causes rapid aging. The scope of this study is seoul public borough offices that should be sustainable for long as landmark located at the center of the district. Field survey was conducted three times in six months. Twenty-six borough offices were diagnosed with three levels of contamination through visual inspection and the contaminated locations, types, materials, and characteristics were checked. Fourteen common contaminated locations were identified in the first and intensively rechecked in the second. Five locations vulnerable to contamination were designated and the contamination and cleanliness situations were checked by location in the third. As a result, main polluted types and locations are sloping wall, upper wall, protruded wall, canopy, and wall under window. The key to avoiding these pollution problems is to minimize the horizontal plane on which dust can be deposited. In other words, it can be considered variously by shape and location, such as the slope of the horizontal plane, the floating of the surface, the installation of the roof surface, and the vertical louvers. And throating plans and material plans suitable for each location are presented. Various methods of the shape and location, material are expected to use as useful basic data for preventing pollutions during the initial design stage.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.12
• /
• pp.149-156
• /
• 2019

Recently, skyscraper building and apartment fires, which were rapidly spread out from a low floor to a rooftop, have become a frequent occurrence in mass media. This fire problems have a fatal disadvantage that the exterior wall finish of the building emits toxic gas in case of fire by using dry bit method or organic insulating material. Therefore, in order to remedy these problems, many exterior wall finishing construction methods have been proposed, but the current trend is to use existing construction methods due to problems such as economy, weight, and durability. On the other hand, in countries such as Germany and Japan, ceramic sidings are used as exterior finishing material for buildings, which is environmentally friendly, excellent natural beauty, long life, easy maintenance and high-quality exterior materials. However, those ceramic sidings have still the problems such as manufacturing cost and weight problem because of boosting the sintering temperature up to 1,350℃ or more. Also, conventional CRC, MgO, FRP sidings which are composed of pulp, glass fiber and organic materials, have been reports of deformation due to ultraviolet rays, discoloration, corrosion and scattering, surface rupture, lifting and peeling. Therefore, in this study as an alternative to solve this problem, halosite nano kaolin produced in Sancheong in Korea and frit flux were used to satisfy the required properties as ceramic siding using low temperature sintering (below 1,000℃) and lightweight materials such as pearlite. This study aims to design the optimal formulation and process of materials and to study the characteristics of nano-coated ceramic siding material development and to present relevant basic data. The findings show that ceramic siding for nanocoated building materials is excellent as a natural ceramic siding building material. The fire resistance of natural minerals and nano particle refining technology satisfy the bending strength of 80kgf / cm2, the volume ratio of 2.0 and the absorption rate of less than 10.0%.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.2
• /
• pp.301-309
• /
• 2006

In this paper, we show the improved fuzzy c-means clustering method. To improve, we use the double clustering as principal component analysis from objects which is located on common region of more than two clusters. In addition we use the degree of membership (probability) of fuzzy c-means which is the advantage. From simulation result, we find some improvement of accuracy in data of the probability 0.7 exterior and interior of overlapped area.

• Journal of the Korean housing association
• /
• v.26 no.1
• /
• pp.43-51
• /
• 2015

The purpose of this study was to analyze the planning characteristics and it's application of container architecture as case study. Field survey was used to analyze the spatial planning characteristics in terms of development outline, appearance, exterior, floor plan and interior of eight famous cases in Berlin, Hamburg, Hannover, Amsterdam and Paris of Europe. The results of this study were as follows; Firstly, good examples of container architectures such as student housing, social service center, temporary medical facility and cruise terminal in Europe suggested the potential of domestic applicability in various purposes and development. Secondly, various types of freight container, building container and module frame system should be developed with their reprocessing environment. Thirdly, it is necessary for us to develop ISO type(20~40ft) container and standard plan with interior and storage design reflecting demands of residents. Finally, the use of container module will be an environmental-friendly alternative for its modularity and reusability, so it should be used as it is without severe deformation. The development of environmental friendly energy sources such as hydro and solar power is necessary for domestic container architecture as well. The container design should include the use of high quality of exterior finishing materials and the plan of aesthetical color planning to make the building a local landmark.

• KIEAE Journal
• /
• v.7 no.4
• /
• pp.23-30
• /
• 2007

In Korea, the top priority of the exterior space in the urban commercial street has been put on the road and parking for cars, not on the street for pedestrians, because of the lack of institutional urban planning, the land use of high density, the pursuit of maximum commercial profit, etc. Also, it is true that the form and facade of the street buildings which form the characteristics of the commercial street are regarded as the consumption-stimulating tool and, subsequently, are symbolized for commercial profit. This study starts from the recognition of reality, and, with the perspective of general plan for urban exterior space, tries to improve the environmental design of street space. Also, this study searches the ways to enhance the cultural, art, aesthetic and functional values of a city, as well as the ways to promote commercial activities and to perform commercial symbolism and pedestrian functions. This study aims at exploring the importance of street environmental design and the information of environmental design, so that the problems of current street environment, which generates the disorder and chaos of information, may be solved. Also, this study aims at promoting the continuous development for the future street environmental design and design plan.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.275-282
• /
• 2000

The seismic behavior of moment connections consisting of reinforced concrete columns and steel beams is investigated based on four 2/3 scale tests of exterior beam-column joints subject to reversed cyclic loading. The major test parameters were the number of hoops the isolated concrete contribution and the use of headed studs in the joint regions between columns and beams. Their influence on the seismic response of the connections is presented and compared. Among them the CF3 specimen containing two hoops each in the joint and column regions above and below exhibited the most favourable hysteretic response. This indicates that this type of joint details can be used in the low seismic areas such as Korea.

• Korean Institute of Interior Design Journal
• /
• v.13 no.3
• /
• pp.76-83
• /
• 2004

Nowadays, our societies use digital technology in new architectural shape and space design to transcend three dimension limit so the boundary of the imagination world and actuality world has been collapsed. Traditional spatial value has been collapsed. Also indetermination and temporary assumption in time, fluidness and dematerialized, simultaneity and reiteration in image are relative with this circumstances. In architectural shape, media characteristics which secede from traditional characteristics of place tectonic value have occurred. Therefore, indifference and interests in shape, inter-permeation in interior and exterior space, homogeneous equivalence spatial extension have occurred. The purpose in this study examines dematerialized in contemporary space design and light materials and also investigates general and architectural background. The results of this study are as follows. First, circumstances of human have changed from physically limited boundary to unfixed, nonphysical, lightness and vague things. Second, casting off volume in shape and also dissembling exclusive and constructive Third, interior and exterior space by transparency intimates media possibility of information screen. Fourth, seek information and organic response, ambivalent transformation, accumulation of image and new mutual understanding system.

• Korean Institute of Interior Design Journal
• /
• v.14 no.2 s.49
• /
• pp.55-62
• /
• 2005

In modern days when architectural materials have grave impacts on overall design expression, materials for architecture, modern architecture into the service facility for business, education, religion, cultural assembly and residence, and evaluates each finishing material mainly used in exterior, lobbies and entrances of the building since the 1970's. When being applied social images into firstly selected materials, the scopes for material selection will be more narrowed down in more practical way. High tensity materials are suitable for public and active space and low tensity are for private and static area. This principle enables us to use architectural materials as one of the important elements which express the whole characteristics of the area.

• Structural Engineering and Mechanics
• /
• v.13 no.1
• /
• pp.17-34
• /
• 2002

The use of local two-sided and three-sided jacketing for the repair and strengthening of reinforced concrete beam-column joints damaged by severe earthquakes is investigated experimentally and analytically. Two exterior beam-column joint specimens ($O_1$ and $O_2$) were submitted to a series of cyclic lateral loads to simulate severe earthquake damage. The specimens were typical of existing older structures built in the 1960s and 1970s. The specimens were then repaired and strengthened by local two-sided or three-sided jacketing according to UNIDO Manual guidelines. The strengthened specimens ($RO_1$ and $RO_2$) were then subjected to the same displacement history as that imposed on the original specimens. The repaired and strengthened specimens exhibited significantly higher strength, stiffness and better energy dissipation capacity than the original specimens.