• Korean Journal of Organic Agriculture
• /
• v.20 no.3
• /
• pp.267-282
• /
• 2012

In this study, RPS system, one of the renewable energy support systems, is utilized for economic analysis of solar generation equipment and the fuel cost savings plan for controlled horticulture farms with high fuel-cost dependency and facility applicability were evaluated. On the exterior of the upper layer of glass greenhouse (9917$m^2$) of controlled horticulture farms using bunker C oil, half of the area (4958$m^2$) was utilized for theoretical installation and operation of 450kW-level solar power generator, and as the result, first, the effect of investment cost only of solar generation system was found to be quite excellent, but it was analyzed that there were limits to saving the fuel costs of the controlled horticulture farms. Second, when geothermal system was first introduced in the farm and solar system was additionally introduced, it was analyzed that the effect of introducing solar system was excellent. In order to apply such effects to the sites of farming, partial supplementation of RPS system which is being uniformly applied regardless of the purpose of renewable energy is necessary. When the subject of use directly install facilities where it is directly connected to national added-value such as food security created by the farming industry, it is necessary to introduce appropriate system that corresponds to such. Moreover, it was studied that the quick development of demonstrative complex that can practically evaluate the applicability of renewable energy in farming industry and interest and preparation of related institutions in financial support structure for its site application would lead to success.

• Journal of Sensor Science and Technology
• /
• v.9 no.1
• /
• pp.44-50
• /
• 2000

Every object emits some energy from its surface. The emission energy forms surface heat distribution which we can capture by using an infrared thermal imager. The infrared thermal image may include valuable information regarding to the subsurface anomaly of the object. Since a thermal image reflects surface clutter and subsurface anomaly, we have difficulty in extracting the information on the subsurface anomaly only with thermal images taken under a wavelength. Thus, we use visible wavelength images of the object surface to remove exterior clutter. We, therefore in this paper, visualize the infrared image for overlaying it with a visible wavelength image. First, we make an interpolated image from two ordinary images taken from both sides of an infrared sensor. Next, we overlay the intermediate image with an infrared image taken from the infrared camera. The technique suggested in this paper can be utilized for analyzing the infrared images on non-destructive inspection against disaster and for safety.

• Journal of the Korean Society of Safety
• /
• v.19 no.3 s.67
• /
• pp.32-39
• /
• 2004

This papers describes on the experimental consideration for the intrinsically-safe explosion-proof capability of rechargeable battery's body about main item rechargeable battery and cellular phone battery which is selling in domestic that IEC(International Electrotechnical Commission) recommend the measurement of ignition limit by short circuit of rechargeable battery and temperature increase test to use a explosion grade Group IIC type of explosion-proof type apparatus test an object of hydrogen gas. Because of that there are many different results for existence or nonexistence for ignition by different company and different types. It is concluded that the maximum of self temperature increasing by spark circuit of rechargeable battery is $180^{\circ}C$ in case of Nickel-Hydrogen and $110^{\circ}C$ in case of Nickel-Cadmium. The reaction of cellular battery for external temperature have following processes. It is confirmed that the temperature of reaction is rise slantly as the ambient temperature rising, then exterior shape of one is swell up and change when the temperature of ambient reach to about $130\~140^{\circ}C$, and when reach to about $160^{\circ}C$ the battery is blown up. Therefore, it is considered that have to be in considering selection of rechargeable battery using in itself due to different ignition limits of various rechargeable battery when the portable electric containing rechargeable battery are designed, produced and used, the characteristics and the proper safety factors of devices.

• Korean journal of food and cookery science
• /
• v.17 no.4
• /
• pp.399-404
• /
• 2001

The effects of dipping syrups prepared with oligosaccharides on Yackwa were examined. The dipping syrups were prepared by replacing sucrose with 50% isomaltooligosaccharide or fructooligosaccharide, and the physical and sensory characteristics of Yackwa dipped in above syrups were evaluated. Addition of oligosaccharides to dipping syrups increased the reducing sugar contents, dehydration rate and absorption rate of Yackwa. The exterior color of Yackwa dipped in oligosaccharides-containing syrup was darker, more reddish and yellowish than control. Use of oligosaccharides in dipping syrup increased the darkness, gloss, moistness and sweetness, and decreased the roasted taste of Yackwa as perceived by panels. Yackwa dipped in the syrups replacing sucrose with 50% oligosaccharides showed better acceptability than control. The acceptability was positively correlated with the gloss and cohesiveness. Above results suggested that oligosaccharides are good alternatives for sucrose in making dipping syrup for Yackwa.

• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.1-5
• /
• 2001

This paper presents an investigation into the operational comparison of SPOT triangulation to build GCP library by analytical plotter and DPW (digital photogrammetric workstation). GCP database derived from current SPOT images can be used to other image sensors of satellite, if any reasons, such as lack of topographic maps or GCPs. But, general formulation of a photogrammetric process for GCP measurement has to take care of the scene interpretation problem. There are two classical methods depending on whether an analytical plotter or DPW is being used. Regardless of the method used, the measurement of GCPs is the weakest point in the automation of photogrammetric orientation procedures. To make an operational comparison, five models of SPOT panchromatic images (level 1A) and negative films (level 1AP) were used. Ten images and film products were used for the five GRS areas. Photogrammetric measurements were carried out in a manual mode on P2 analytical plotter and LH Systems DPW770. We presented an approach for exterior orientation of SPOT images, which was based on the use of approximately eighty national geodetic control points as GCPs which located on the summit of the mountain. Using sixteen well-spaced geodetic control points per model, all segments consistently showed RMS error just below the pixel at the check points in analytical instrument. In the case of DPW, half of the ground controls could not found or distinguished exactly when we displayed the image on the computer monitor. Experiment results showed that the RMS errors with DPW test was fluctuated case by case. And the magnitudes of the errors were reached more than three pixels due to the lack of image interpretation capability. It showed that the geodetic control points is not suitable as the ground control points in DPW for modeling the SPOT image.

• Korean Institute of Interior Design Journal
• /
• v.16 no.3 s.62
• /
• pp.10-20
• /
• 2007

The materials on the development of modern architecture in Korea are being collected and organized in a systemic fashion. However, this is not the case with the materials relative to interior design. They are gradually disappearing or being lost. In particular, no serious attempt has yet been made to determine the characteristics and historic value of the interior design of the modern bank buildings. The purpose of this study is to trace the disappearing legacy of the interior design of modern bank buildings by learning the inner space arrangements of these buildings and the characteristics of modern interior design in order to determine the historic significance of modern commercial interior design. Banks of relatively large scale were selected for the purpose of this study. They consisted of: Chosun Bank(1911) and its Andong, Wonsan and Cheongjin branches; Chosun Shiksan Banks and its Busan, Daegu and Pyongyang branches; the Busan branch of the 18 Bank; Dongil Bank, Chosun Savings Bank(1935) and their branches. The study focused on the space arrangements and design characteristics of these banks. Although they aimed at modernization in designingtheir interior spaces, the modern bank buildings were not representative of any particular style of interior design. While western style designs were prevalent, eclectic designs incorporating many different styles existed. The characteristics of the interior design of banks of the time included installation of such decorations and use of high quality construction materials for interior and exterior expressing the wealth as to create an aura of credibility for the banks, while the floor arrangements were relatively stereotyped and simplified.

• Korean Institute of Interior Design Journal
• /
• v.14 no.3 s.50
• /
• pp.84-94
• /
• 2005

The purpose of this study is to establish the identity of the traditional residential space in Korea and Japan as analyzing the spatial characteristics and sociocultural roles of the 'in-between space' shown in their traditional dwelling space. Although they share culture area, it is meaningful to clarify the identity of both countries with many differences as the point of localization In globalization and the point of presenting the current and future directions of residential culture in both countries. Records and field studies have been carried out for the spatial characteristics and the sociocultural role focused on Ma-dang and Dae-chung in case of the 'in-between space' in Korean traditional dwellings and Inner housing, Doma, and Engawa in Japan. According to these findings, the spatial characteristics in common between Korea and Japan are open, half-open, separation, mitigation, integration, variation, continuation, hierarchy, mediation, and expansion. The 'in-between space', built by the separate Chae and Kan, of Korean traditional dwellings shows the separation by closed walls and the exclusive use by the fixed walls. In case of Japan, the integrated in-between space built by the separation of Kan shows open and connective tendencies and the variableness of walls has the tendency making ambiguous space with spatial softness. The sociocultural role of the 'in-between space' in Korean traditional dwelling space functions as the mitigation between the interior and exterior of the house as well as the male and female. Because the conception for protecting the private life is too weak, the sociocultural role of the 'in-between space' in Japanese traditional dwelling space seldom forms the space for an individual or the specific person among family. The space to welcome a guest functions as the mitigation between residents and outsiders as it is located in the inside of the private dwelling space.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.734-736
• /
• 2016

Doors are in various buildings, such as large retail stores, hospitals, restaurants, government offices and is used as a door to provide convenience for customers, the convenience of security to control doors and exterior access Castle, etc. In the case of housing door facilities It has been used widely. However, the conventional automatic door controller Although the primary use of the PID control, the contact size and weight depending on the location to cause an instability in the system controller or the like, and disturbance of parameter variation and uncertain dynamics because of the wide variations. In this paper, we design a robust controller to compensate for uncertainties and to compensate for the disturbance.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1171-1176
• /
• 2005

The latest technical development of steel plate girder railway bridge are developing in ways to maximize its durability of materials in use of high strength steel and efficiency of maintenance and management by the introduction of simplified and standardization ideas. In addition to this, it is also expected to reduce the cost of bridge construction and to simplify the process of bridge manufacturing. Referring to this, composite few plate girder railway bridge is highly recommendable that is very economical with the fine exterior. In this paper, it will analyse the variation of dynamic behavior of existing composite few plate girder railway bridge with ballast caused by modified Slab Track through interpretation of limited enzyme in order to obtain the existing data for improvement of Slab Track system from Ballast Track system. Consequently, it can help maximize economic efficiency and structural capability. As a results, although the natural frequency by modified Slab Track are decreased, it is hardly influencing on the safety of railway bridges. It is also evident in the case of slab deck with a reduced scale in comparison with Ballast Track. Therefore, it is expected to reduce the cost of a railway bridge plan. And, it can expect the synergistic effect of the ensure long term durability of bridge caused by decreased stresses of bottom flange due to reduced dead load. As a result, the analytical study are carried out to investigate the composite few plate girder railway bridge could be the optimal design method for the dynamic safety of a girder section.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.12
• /
• pp.15-21
• /
• 2000

In this study, the electromagnetic coupling through a narrow slit in the upper wall of a short-ended parallel-plate waveguide(PPW) covered by a dielectric slab with a nearby conducting strip on the slab Is considered for the case that the TEM wave is incident in the PPW. Coupled integral equations whose unknowns are the slit electric field and the induced electric current over the strip are derived and solved numerically by use of the method of moments. From results, it has been observed that most of the incident power can be coupled exterior to the guide by appropriately setting the strip width and position, though the slit is very narrow. In addition, the differences between the radiation phenomena, observed in the cases that the conducting strip and the upper Plate of the PPW form a cavity and that strip behaves like a parasitic element, are discussed.