• Korean journal of food and cookery science
• /
• v.29 no.5
• /
• pp.533-541
• /
• 2013

The purpose of this article was to study the influence of tangible clues of raw-fish restaurants on consumers' emotional responses and repurchasing behavior in eastern area of Kangwon-province. In this study frequency analysis, reliability analysis, factor analysis and path analysis(SEM) were applied to analyze the data. Through path analysis tangible clues' performances had generally significant influences upon consumers' emotional responses to buy products of raw-fish restaurants. According to the results, exterior facility had positive influence on pleasure(p<0.001) and arousal(p<0.01). Interior facility had positive influence on pleasure(p<0.001) and arousal(p<0.001), but negative on dominance(p<0.01). And the others had positive influence on pleasure(p<0.05). Press copy had positive influence on pleasure(p<0.001) and arousal(p<0.001). And Pleasure and arousal had positive influence on repurchasing behavior(p<0.001). But Dominance didn't have significant influence on repurchasing behavior. As a result, we studied that the tangible clues was an effective marketing tactic to maintain and increase consumers' positive emotional reponses to repurchase at restaurants. Therefore it is finally needed that dining-out corporations manage tangible clues in a customer-maintaining without additional costs, and especially to use mixing tangible clues each other in some suitable condition.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.1
• /
• pp.83-96
• /
• 1991

The use of SPOT Imagery is a growing trend in the field of small and middle scale mapping, as well as in establishing topographic database. This study is about 3-D positioning using the SPOT Imagery, where the accuracy and the gemetric characteristics of SPOT photos are analysed according to the preprocessing level (level 1AP,1B). As a result of this study the following could be determined, i. e 1) the geometric characteristics of SPOT Imagery according to the preprocessing level, 2) the optimal polynomial type for exterior orientations of each preprocessing level, and 3) the type of significant additional parameters. It was found that both the geometric precision and accuracy of level 1AP is higher than those of level 1B, which implies that level 1AP is more suitable for precise 3-D positioning and map production.

• The Research Journal of the Costume Culture
• /
• v.23 no.3
• /
• pp.400-411
• /
• 2015

Successful use of displays in stores arouses consumers' curiosity, and induces them to purchase a product after a visit. Facade is a word meaning an external front wall of a building, and is usually the first point of visual contact for the consumers. The present study is an empirical investigation of external appearance of a clothing store, with a $2{\times}2{\times}2$ factorial design of facade, show window, and wall surface material designed for the purpose of the study. Dependent variables were store image variables and attitude toward store. A total of 320 questionnaires from male and female consumers were used for the analysis. Facade type and material had significant main and interaction effects, while show window type had no meaningful effects overall. A facade of irregular design prompted significantly higher levels of perceived 'elegance', 'uniqueness', and 'attractiveness' of the store. Material itself did not have significant influence but did have significant interaction effect with facade design. The interaction effect was found in store attitude as well. In order to create a positive store attitude, a concrete material facade should have an irregular design. Companies owning fashion brands should carefully select facade type and wall surface material in the visual merchandising strategies of a store.

• Corrosion Science and Technology
• /
• v.15 no.2
• /
• pp.78-83
• /
• 2016

The e-coating to inhibit induced corrosion can deposit a coating not only on the exterior surface but also on the inside of whole metallic components of body-in-white (BIW). But it is difficult to deposit paint films on the inside area because metallic components are multi layered. It may cause shortness of e-coating thickness. The only way to properly verify e-coating thickness is by performing the use of tear-down prototypes. When paint films' thickness is inadequate, a structural modification on each metallic component is needed. Verification of the thickness improvement for a structural modification requires much manual effort and leads to increasing development time. Recently, the simulation technology has been developed to predict the e-coating thickness in e-coating field. By applying the simulation to BIW, improvement in paint thickness quality and shortening of development period are expected. The paper explains a validated solution that allows simulating the effect of design changes to the e-coating thickness and current density, thereby delivering results within a time frame of a few days.

• KIEAE Journal
• /
• v.9 no.6
• /
• pp.13-18
• /
• 2009

Korean traditional houses have been developed in harmony with natural environment and comfortable indoor condition by using the natural resources including building layout, space composition and materials. Originally Korea traditional architectures have used wood lintel constructions and loess walls through the many years. Theses loess have many strength such as highly heat capacity, controling of humidity, a deodorant than any other materials. Nowaday it is recommended to use exterior and interior walls in loess wall to meet the eco-friendly materials to improve our residental environmental. Thus this study aims to research the sound insulation performance of traditional loess brick wall varied with thickness, thermal insulation materials and cavity wall. The sound insulation performance of these loess walls are compared with other masonry wall's and sound insulation performance of th walls were tested in anechoic laboratory to measure the sound transmission loss of these walls. The loess brick wall with 75mm thickness of cavity is shown the sound insulation performance with Rw 57 which is nearly same performances of 1B brick wall and cement 8' block wall, The improving effect of insulation materials is shown in the high frequency bandwidth. Especially, there is improving as much as 11 dB using the extruded poly stylene form(75mm) and poly ethylene film(0.7mm).

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.59-60
• /
• 2019

Thermal bridge on a building envelope causes additional heat loss which increases the heating energy consumption. As the higher building insulation performance is required, heat loss through thermal bridge becomes higher proportion among total building heating energy consumption. For the exterior insulation and finish system, thermal bridge between window frame and concrete wall should be constidered as one of main reasons of heat loss. In this study, the thermal bridge barrier between window frame and concrete wall(STAR) was proposed as the best practice for reducing thermal bridge. The STAR was confirmed that the use of thermal bridge barrier imporved the annual heat energy capacity by 35% or more and the innitial construction cost by 7.4% or less because of additional interior insulation against condensation. Finally the life cycle cost during 20 year by heating energy of a building reduced by 25% or more compared with the exist technology. This STAR thermal bridge barrier will be used as the main technology to improve the energy efficiency of building.

• The Korean Journal of Community Living Science
• /
• v.20 no.4
• /
• pp.469-479
• /
• 2009

New rural village development programs have been implemented, and rural village land use is expanded to encompass green-tourism, citizen and silver domicile space because of the internal and the external changes in the agricultural environment. This study was conducted to propose the evaluation index for retiree rural village development project issued by Ministry for Food, Agriculture, Forestry and Fisheries. The evaluation index was consisted of four categories (population, economic, environment, and living), which were consisted of 35 variables. The relative weight for 35 variables was calculated based on the questionnaire survey from the experts and AHP (Analytical Hierarchy Process). Growth rate of population in population criteria, job creation by exterior inflow in economics criteria, improvement of exchange between urban and rural in life criteria, and the flood outbreak in environment criteria were the most important contents of 35 variables. These results are consistent with the objectives of retiree rural village development project, and indicate the need of prevention the negative sides by implementation of the project.

• Journal of architectural history
• /
• v.24 no.1
• /
• pp.7-16
• /
• 2015

The purpose of this study is to identify ways of remodeling from the traditional hanok to the modern local governmental facility in 1910s. Analysing architectural drawings in the National Archives of Korea, 58 hanok remodeling cases of 52 facilities were verified like the provincial office, county office, county court from 1907 to 1910s. Using hanok as the local governmental building, exterior walls were all changed to the scaled-wooden wall like one of western-wooden building in 1910s and the western-style entrance was set. Change of the plan caused by remodeling interior walls had an intention of the centralized closed plan. Remodeled semi-outer corridor using the space of the eave became changed to the inner corridor with expansion of space. Expansion of hanok for spatial demand was in three ways. First was the expansion towards the eave space, second was direct extension from hanok, and last was the use of external corridor to the new building. Using the eave space was simple but had limitation of space, it was planed with other expansion ways. The way of direct extension was usually used than the one with the corridor, because it was more economical way.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.3
• /
• pp.101-109
• /
• 2004

This research investigates the life-cycle energy consumption of the windows used for the building's exterior cladding, and its environmental potential aspects by utilizing the LCA. The research scope has taken account of the entire life-cycle of the windows from the extraction of raw materials to its disposal, of which given sample building type is an apartment building. Results gained from the LCA of the windows as one of the steps in analysis reflects the current global interest and analysis trend towards the world's environmental issue on all fields of industry including the architectural industry, of which its newly established standards of architectural windows can further promote more environmentally sustainable factor compared to the previous analysis (focused more on energy efficiency assessment of the use stage).

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2008.05a
• /
• pp.128-133
• /
• 2008

As societal development improves the quality of life and changes the structure of society, the needs of the residents have been varied. As a result, the spaces in Korean houses have also been varied. This phenomenon can be found in both external and internal spaces; a transitional space, which connects the outside space and the inside space, is formed as transition occurs at each phase of movement. As the importance of external and internal spaces is emphasized, and as internal spaces are extended to the exterior, various forms of transitional space are needed. In this study, the boundary types of internal/external spaces are analyzed through transitional spaces that are formed in relation with internal and external spaces. Based on the analysis, transitional spaces in modem Korean houses are classified into the addition type, the cutting type, and the connection type. The results of the study show that transitional spaces in detached houses tend to be placed closely to rooms and a public space, and in terms of material use, the externalization of internal spaces is occurring.