• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.199-204
• /
• 2003

The purpose of this study is to experimentally investigate the structural performance of concrete exterior beam-column joints confined by carbon sheet tube. Four specimens were produced with different numbers of carbon sheet and the other specimen was produced with reinforced concrete. A hydraulic dynamic actuator with 30tonf capacity was used to cyclic lateral loading test. The experimental results represent that the numbers of carbon sheet have an influence the load and displacement capacity. However, the bond length of carbon sheets for connecting beam and column has to be considered to improve the capacity of joint.

• Steel and Composite Structures
• /
• 제27권1호
• /
• pp.49-74
• /
• 2018

Generally, beam-column joints are taken into account as rigid in assessment of seismic performance of reinforced concrete (RC) structures. Experimental and numerical studies have proved that ignoring nonlinearities in the joint core might crucially affect seismic performance of RC structures. On the other hand, to improve seismic behaviour of such structures, several strengthening techniques of beam-column joints have been studied and adopted in practical applications. Among these strengthening techniques, the application of FRP materials has extensively increased, especially in case of exterior RC beam-column joints. In current paper, to simulate the inelastic response in the core of RC beam-column joints strengthened by FRP sheets, a practical joint model has been proposed so that the effect of FRP sheets on characteristics of an RC joint were considered in principal tensile stress-joint rotation relations. To determine these relations, a combination of experimental results and a mechanically-based model has been developed. To verify the proposed model, it was applied to experimental specimens available in the literature. Results revealed that the model could predict inelastic response of as-built and FRP strengthened joints with reasonable precision. The simple analytic procedure and the use of experimentally computed parameters would make the model sufficiently suitable for practical applications.

• Structural Engineering and Mechanics
• /
• 제46권6호
• /
• pp.809-825
• /
• 2013

In the present study, in reinforced concrete structures, beam-column connections are one of the most critical regions in areas with seismic susceptibility. Proper anchorage of reinforcement is vital to enhance the performance of beam-column joints. Congestion of reinforcement and construction difficulties are reported frequently while using conventional reinforcement detailing in beam-column joints of reinforced concrete structures. An effort has been made to study and evaluate the performance of beam-column joints with joint detailing as per ACI-352 (mechanical anchorage), ACI-318 (conventional hooks bent) and IS-456(full anchorage conventional hooks bent) along with confinement as per IS-13920 and without confinement. Apart from finding solutions for these problems, significant improvements in seismic performance, ductility and strength were observed while using mechanical anchorage in combination with X-cross bars for less seismic prone areas and X-cross bar plus hair clip joint reinforcement for higher seismic prone areas. To evaluate the performances of these types of anchorages and joint details, the specimens were assembled into four groups, each group having three specimens have been tested under reversal loading and the results are presented in this paper.

• 한국지진공학회논문집
• /
• 제14권4호
• /
• pp.29-36
• /
• 2010

국내 비내진 설계된 RC 골조 외부접합부의 횡저항 능력특성을 연구하기 위하여, 1988년 이후의 건물을 대상으로 실물 크기의 70%의 T형 보-기둥 실험체 4개를 제작하여 보에 횡력을 가력하여 실험을 수행하였다. 작용한 횡력은 총 9단계로 변위를 조절하여 최대 횡변위비 3.5%까지 가력하였고, 각 변위 단계마다 3싸이클의 반복하중을 가력하였다. 실제의 상황과 유사하게 하기 위하여 실험동안 기둥에 압축력을 지속적으로 작용하였다. 실험 결과, 부재가 휨 공칭강도에 도달하여야 하는 내력에 비하여 실험 결과는 85%이하로 나타났고 층간변위비 0.85% 미만에서 모든 실험체의 접합부에서 전단균열이 발생하여 국내 외부접합부가 취약함을 확인할 수 있었다. 또한 접합부 균열발생시 주응력-층간변위비는 Priestly의 제안식과 유사하게 나타났다.

• 콘크리트학회논문집
• /
• 제19권3호
• /
• pp.265-273
• /
• 2007

최근 우리나라의 공동주택 또는 주상복합 건물의 구조 시스템으로 상부 벽식 하부 골조의 복합구조 형태가 주로 사용되고 있다. 이와 같은 건물의 경우 상부층의 하중이 전이판 또는 깊은보의 형태를 띠는 깊은보를 통해 하부 골조로 전달되고, 횡력에 대해서는 하부 골조가 연층 또는 약층에 의한 파괴가 발생할 수 있기 때문에 횡력에 대한 깊은보와 기둥은 매우 중요하다. 본 연구에서는 이러한 깊은보와 하부 기둥이 만나는 부분에서 요구되는 강도, 연성 등을 파악하고자 깊은보-외부기둥 접합부에 대해 ACI의 중진지역 상세에 의한 방법과 Sheikh가 제안한 방법에 따라 기둥을 설계한 후, 1/2.5 축소 모델 실험에 대한 반복 횡하중 실험을 수행하였다. 그 결과는 다음과 같다. (1) Sheikh의 제안식에 따라 설계할 경우 요구 횡철근이 2.9배 증가하였으며, 이는 기둥의 연성이 증가하는 결과를 가져왔다. (2) 기둥 횡변 위는 대부분 소성힌지에서 휨변형, 접합부에서 휨변형, 그리고 들뜸에 의해 발생하였다. (3) 깊은보와 외부기둥이 접하는 경우 기둥의 상세 뿐만 아니라 접합부에서 과도한 변형을 방지하기 위해 접합부 내부에도 충분한 횡철근이 배근이 되어야 할 필요가 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.53-56
• /
• 2008

대부분의 철근콘크리트 라멘 구조물은 지진하중 작용 시 가장 취약한 부분인 보-기둥 접합부 영역에서 큰 피해를 유발할 수 있다. 이러한 피해를 방지하기 위하여 보수 및 보강에 관한 연구가 이루어지고 있으며, 전 세계적으로 내진규정이 강화되고 구조물의 내진성능이 중요시되면서 지진에 효율적으로 저항할 수 있는 성능을 확보한 재료 개발이 증가되고 있다. 변형경화형 시멘트 복합체(Strain-hardening cementitious composite, SHCC)는 연성능력이 우수하여 보-기둥 접합부 영역에서 상당한 보강효과가 기대된다. 따라서 본 연구에서는 SHCC로 접합부를 보강한 철근콘크리트 보의 보강특성을 평가하고자 총 3개의 실험체를 제작하였다. 실험을 통하여 균열 및 파괴양상에 대하여 휨거동 특성을 평가하고 섬유 혼입률에 따른 SHCC의 보강효과에 대한 강도를 비교하였다.

• 한국정밀공학회지
• /
• 제24권2호
• /
• pp.118-126
• /
• 2007

Most of materials receive forces in use so that the characteristics of materials must be considered in system design to prevent deformation or destruction. Mechanical properties of materials can be expressed as responsible level of material itself under the exterior operation. Main mechanical properties are strength, hardness, ductility and stiffness. Currently, among major measure facilities to measure the mechanical properties, advanced indentation technique has important use in industrial areas due to nondestructive and easy applications for mechanical tensile properties and evaluation of residual stress of materials. This study is to find the optimum experimental condition about residual stress advanced indentation technique for accurate analysis of the welded joint of steel materials through indentation load-depth curve obtained from cruciform specimen experiment. Optimum selection was applied to the welded joint of real steel materials to find out non-equi-biaxial stress state and the results were compared with general residual stress analyzing method fur verification.

• Journal of the Korean Statistical Society
• /
• 제22권2호
• /
• pp.339-345
• /
• 1993

It is well known that distribution of functions of eigen values and vectors of a certain matrix plays an important role in multivariate analysis. This paper deals with the transformation of a correlation-type random matrix to its eigen values and vectors. Properties of the transformation are also considered. The results obtained are applied to express the joint distribution of eigen values and vectors of the correlation matrix when sample is taken from a m-variate spherical distribution.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.221-222
• /
• 2023

In this study, the performance evaluation of waterproof sealant materials applied to the outer wall of PC apartment houses was conducted. The sealant for PC members must have resistance to movement, and since it is exposed to outside air, weather resistance and water resistance are required.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.506-509
• /
• 2004

This paper proposes Headed bar as reinforcement of beam-column joint, and proves seismic performance and reduction of reinforcement congestion. In these case, the use of Headed bars have obvious advantages. The greatest benefit of using Headed bars is not only improved structural performance of beam-column joints, but also the ease of fabrication, construction, and placement. Three-dimensional finite element analysis model is compared with test program which was fulfilled by the proposed model with Headed bar. Also, the plastic hinge region is relocated to the center of the longitudinal beam length according to the strong column-weak beam design philosophy, so Headed bar is used as the joint reinforcement. Therefore, this paper presents results of a computer analysis of a practical solution for relocating potential beam plastic hinge regions by the placing of straight - Headed bar.