• The Korean Journal of Pesticide Science
• /
• v.3 no.3
• /
• pp.54-59
• /
• 1999

The objective was to know if corn growers at Hongchcel County, Kangwon-do, where corn is the major agricultural product, control weeds effectively and use herbicides properly to control weeds. Sixty-eight corn growers at Hongchon were participated in this survey. Corn growers have noxious weeds, such as hairy carbgrass, common purslane, lambsquarters, Asiatic dayflower, mugwort and barnyard grass in their corn fields. Forty-four percents of the answered corn growers control weeds by hand weeding, and the others by a combination of physical and chemical methods. Corn growers have a preference of paraquat and alachlor for a pre-emergence treatment (94% of the answered) and of paraquat, glufosinate, glyphosate and fluazifop-P-butyl for a post-emergence treatment (87% of the answered). Corn growers did not select and use herbicides in a proper manner. fifty-four percent of the answered corn fevers selected herbicides by their own experience and 18 percent by neighbors recommendation. Herbicides were not selected and used in a proper manner by corn growers: 54 percent of the answered selected herbicides by the experience of growers and 18 percent by the recommendation of neighbors. In addition, a half of the answered applied over two-fold higher amounts of herbicides than the recommended rate. With these improper- selection and use of herbicides, 37 percent of the answered have experienced the crop damage and 42 percent the herbicide poisoning. We conclude that the development of the educational program for the proper selection and use of herbicides is needed for corn growers in Kangwon-do.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.2 no.1
• /
• pp.28-36
• /
• 2003

Purpose: To determine and to compare the effects of cyclic loading on the fixation strength of different femoral fixation methods in ACL reconstruction. Materials and Methods: Biomechanical test using an Instron(R) machine (Model No.5569. Mass, U.S.A) were carried out to compare the pull out strength of six different femoral fixation techniques after a cyclic loading in 72 Yorkshire pig knees. The graft-bone complex was cyclically loaded between 30N and 150N at 50 mm/min rate for 1000 cycles and maximal tensile testing was performed. A preload of 30N was applied to the graft along the axis of the tunnel 15 minutes. ANOVA and the Duncan multiple comparison test was used for the statistical analysis. Results: The mean maximum tensile strength of femoral fixation before and after the cyclic loading test were 1003.4$\pm$145N and 601.1$\pm$154N in hamstring-LA screw(R) group, 595.5$\pm$104N and 360.7$\pm$56N in hamstring-Bioscrew(R) group, 1431.7$\pm$135N and 710.7$\pm$114N in hamstring-Semifix(R) group, 603.6$\pm$54N and 459.1$\pm$46N in hamstring-Endobutton(R) fixation group, 1067.4$\pm$145 and 601.8$\pm$134N in the BPTB-Titanium interference screw group, and 987.1$\pm$168N and 588.7$\pm$124N in the BPTB-Bioscrew(R) group. And these data illustrated that cyclic loading reduces the maximum tensile strength by 40 $\%$, 39 $\%$, 50 $\%$, 24 $\%$, 44 $\%$, 40 $\%$ respectively. Conclusions: With the results of these experiments it should be emphasized that rehabilitation exercises after anterior cruciate ligament reconstruction should be executed with precaution as the repetitive flexion and extension of the knee would compromise the maximum tensile strength of the graft tendon.

• Weed & Turfgrass Science
• /
• v.7 no.3
• /
• pp.191-199
• /
• 2018

This study was to investigate the occurrence patterns of paddy weeds, their resistance levels to an ALS inhibiting herbicide, and to estimate the areas of resistance in these paddy fields. We used soil collected from 358 paddy fields of Jeonnam province in 2017. Based on their life cycles, weeds were 96% annuals and 4% perennial. Additionally, according to morphological classification, 59% were broad leaves, 28% were sedges and 13% were grasses. Different areas within Jeonnam province contained different numbers and occurrence rates of weed species. However, generally, we observed Lindernia dubia var. dubia, Monochoria vaginalis var. plantaginea, Ludwigia prostrata, L. procumbens, Cyperus difformis, Scirpus juncoides, Eleocharis Kuroguwai, Echinochloa oryzoides, and E. crus-galli var. echinata. We also observed seven weeds resistant to an ALS inhibiting herbicide. They were M. vaginalis, S. juncoides, C. difformis, L. dubia, Ludwigia prostrata, E. oryzoides, and E. crus-galli var. echinata. Although there were differences in the number and occurrence rate of resistant weed species to an ALS inhibiting herbicide among areas in Jeonnam province, the M. vaginalis, C. difformis, and S. juncoides occurred in 23 cities and counties in Jeonnam including Gwangju metropolitan city. Based on the rates (52%) of resistant occurrence to an ALS inhibiting herbicide in Jeonnam province, the area of weed resistant paddy fields was estimated to be 91,543 ha.

• Korean journal of applied entomology
• /
• v.48 no.2
• /
• pp.123-158
• /
• 2009

An attempt was made to stimulate future research by providing exemplary information, which would integrate published knowledge to solve specific pest problem caused by resistance. This review was directed to find a way for delaying resistance development with consideration of chemical(s) nature, of mixture, rotation, or mosaics, and of insecticide(s) compatible with the biological agents in integrated pest management (IPM). The application frequency, related to the resistance development, was influenced by insecticide activity from potentiation, residual period, and the vulnerability to resistance development of chemical, with secondary pest. Chemical affected feeding, locomotion, flight, mating, and predator avoidance. Insecticides with negative cross-resistance by the difference of target sites and mode of action would be adapted to mixture, rotation and mosaic. Mixtures for delaying resistance depend on each component killing very high percentage of the insects, considering allele dominance, cross-resistance, and immigration and fitness disadvantage. Potential disadvantages associated with mixtures include disruption of biological control, resistance in secondary pests, selecting very resistant population, and extending cross-resistance range. The rotation would use insecticides in high and low doses, or with different metabolic mechanisms. Mosaic apply insecticides to the different sectors of a grid for highly mobile insects, spray unrelated insecticides to sedentary aphids in different areas, or mix plots of insecticide-treated and untreated rows. On the evolution of pest resistance, selectivity and resistance of parasitoids and predator decreased the number of generations in which pesticide treatment is required and they could be complementary to refuges from pesticides To enhance the viability of parasitoids, the terms on the insecticides selectivity and factors affecting to the selectivity in field were examined. For establishment of resistant parasitoid, migration, survivorship, refuge, alternative pesticides were considered. To use parasitoids under the pressure of pesticides, resistant or tolerant parasitoids were tested, collected, and/or selected. A parasitoid parasitized more successfully in the susceptible host than the resistant. Factors affecting to selective toxicity of predator are mixing mineral oil, application method, insecticide contaminated prey, trait of individual insecticide, sub-lethal doses, and the developmental stage of predators. To improve the predator/prey ratio in field, application time, method, and formulation of pesticide, reducing dose rate, using mulches and weeds, multicropping and managing of surroundings are suggested. Plant resistance, predator activity, selective insect growth regulator, and alternative prey positively contributed to the increase of the ratio. Using selective insecticides or insecticide resistant predator controlled its phytophagous prey mites, kept them below an economic level, increased yield, and reduced the spray number and fruits damaged.

• Korean journal of applied entomology
• /
• v.53 no.2
• /
• pp.157-169
• /
• 2014

Between 2010 and 2012, diseases and insect pests of sweet persimmon were surveyed at sweet persimmon export complexes and non-export orchards in Suncheon, Jeonnam Province; Jinju, Changwon (Dongeup and Bukmyeon), and Gimhae, Gyeongnam Province; and Ulzu, Ulsan. The following diseases were found in the sweet persimmon orchards: angular leaf spot (Cercospora kaki), anthracnose (Colletotrichum gloeosporioides and Colletotrichum acutatum), circular leaf spot (Mycosphaerella nawae), powdery mildew (Phyllactinia kakicola), and gray mold (Botrytis cinerea). Circular leaf spot was the most frequent and serious disease, and C. gloeosporioides and C. acutatum were found on fruits. Thirty-three insect pest species that belonged to 32 genera of 20 families in 5 orders were found in the sweet persimmon orchards; the two-spotted spider mite, Tetranychus urticae, was also found in the surveyed orchards. Apolygus spinolae, Pseudaulacaspis cockerelli, and Adoxophyes orana were widely found in the surveyed orchards; Spodoptera litura and Homona magnanima were also recorded. Damage by insect pests was low, and the quarantine insect pests peach pyralid moth (Dichocrocis punctiferalis) and persimmon fruit moth (Stathmopoda masinissa) were rarely or not found in the sweet persimmon export complexes. In addition, other quarantine insect pests, such as persimmon false spider mite (Tenuipalpus zhizhilashviliae) and Japanese mealybug (Planococcus kraunhiae), were not detected. These quarantine insect pests were also not found in the sorting places, storage houses, and fruits for export; however, scale insects and two-spotted spider mites were found at a low rate. Although anthracnose (C. acutatum) infested fruit was found in the storage houses, only one in Jinju and Gimhae.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.4
• /
• pp.339-349
• /
• 2010

The uses of the polypropylene bulk bags having the loading capacities more than 500 kg are increasing in Korea recently as a storage container for rough rice. This study was performed to obtain the basic information on the changes of temperature and relative humidity in the bulk-bag-stored high moisture rough rice during waiting for drying. At the moisture content more than 22% on wet weight basis of paddy, the bulk-bag inside temperature rose up to more than $40^{\circ}C$ and then slid down during storage. For example, in case of Hwaseongbyeo, 26.5% moisture content of rough rice (MCRR) harvested at 46 days after heading (DAH) showed $54.5^{\circ}C$ of peak temperature at 66.8 hours after bulk-bag loading, 22.5% MCRR harvested at 52 DAH exhibited $42.0^{\circ}C$ at 81.1 hours, and 19.7% MCRR harvested at 55 DAH displayed $38.9^{\circ}C$ at 119.0 hours. There were a good linear relationship between peak temperatures of bulk-bag inside and moisture contents of paddy ($r^2$=0.89 in 2005, and 0.87 in 2006), while the slope and intercept of the linear regression equation was affected by the environmental conditions such as ambient temperatures and microbial flora. The peak temperatures increased with the rate of about $2.74-3.33^{\circ}C$ per every 1% increase of moisture content at higher moisture contents of paddy than 19%. The relative humidity varied depending on bulk-bag inside temperature and rough rice moisture content, and showed the range of 94.2% to 99.9% in the central point of the bulk-bag. The results suggested that a rapid drying treatment as soon as possible was needed to produce a good quality of rice when the paddy of high moisture more than 22% on wet basis was harvested in a bulk-bag especially at high ambient temperature.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.2
• /
• pp.67-72
• /
• 2017

BACKGROUND:Cultivation of alternative crops in paddy fields is necessary because of the decrease in rice consumption and the increase in excess stock of rice. The study was conducted to investigate the effects of alternative crops cultivation in paddy fields on soil physico-chemical characteristics and crop yield. METHODS AND RESULTS: Soybean (Glycine max), red-clover (Trifolium pratense), and water convolvulus (Ipomoea aquatica) were selected for alternative crops in the first and/or second year and rice was planted in the third year. When alternative crops were cultivated in the previous year, soil bulk density, soil hardness, and water content were lower than those for rice cultivation. Water-depth decreasing rate and aggregate content were greater for the upland-upland-paddy cropping system than upland-paddy-paddy cropping system. Cultivation of red-clover and water convolvulus for two years resulted in the high soil organic matter content. In the third year, available phosphate, exchangeable potassium, and soil cation exchange capacity were relatively high when soybean was cultivated in the previous year. In the first year, water convolvulus cultivation showed greater productivity than red-clover cultivation while the opposite pattern was found in the second year. Rice yield in the third year was greater for soybean or red-clover as a previous crop than for water convolvulus as a previous crop. CONCLUSION: The results suggest that cultivation of alternative crops in paddy fields can improve soil physical properties including bulk density, hardness, water content, and aggregate content as well as rice productivity.

• Journal of Animal Science and Technology
• /
• v.51 no.4
• /
• pp.265-272
• /
• 2009

A total of 486 milk records were collected from 16 diary farms in Imsil-gun, Jeollabuk-do. Results obtained were as follows: The average 3MG (amount of milk within the first three minute) was 7.44 kg and 55% of total milk yield was produced within 3 min. The average of SPL (% of foam in milk) was 33.93% and the average of MNG (strip yield) was 0.14 kg, which was less than 1% of total milk yield. The averages of HMF (highest milk flow), HMG (maximum milk flow rate in one minute) and DMHG (average milk flow in the main milking phase) were 3.03 kg/min, 2.94 kg/min and 2.05 kg/min, respectively and the average milking speed in Imsil-gun was slower than other regions. The average of tS500(time to reach 0.5 kg/min at beginning) was 0.23min (about 14 seconds) and that of tMGG (duration of the total milking) was 7.75min. The average tMBG (duration of the dry milking phase) was 0.58 min (35 seconds) and that of tMNG (duration of the stripping phase) was 0.42min (14 seconds). The averages of ELHMF (electrical conductivity at highest milk flow) and ELAP (beginning peak level of the electrical conductivity) were 6.81 mS/cm and 7.58 mS/cm, respectively. The average of ELMAX (maximum electrical conductivity) was 7.48 mS/cm and that of ELAD (beginning peak difference of the electrical conductivity) was 0.61 mS/cm. While the total milk yields for DMHG, tMHG (duration of the main milking phase), tPL (duration of the plateau phase), tAB (duration of the descending phase) and tMGG were positively correlated (0.35~0.54), those for tMBG and SPL were negatively correlated (-0.11 and -0.27). As the DMHG increased, tMHG, tPL, tAB, tMGG and SPL decreased. While the cows with higher electrical conductivity at the beginning of milking had less somatic cell counts, cows with higher electrical conductivity after the peak of milk yield had more somatic cell counts. The results of this experiment indicated that through milking based on milking and lactating standards and the regular checking of milking status, the qualities of milk and milk yields could be improved.

• Culinary science and hospitality research
• /
• v.21 no.4
• /
• pp.1-15
• /
• 2015

For the consumption extension of Chinese artichoke(Stachys sieboldii MIQ), the quality characteristics and sensory evaluation of white pan bread prepared with different levels of added Chinese artichoke powder(0, 3, 6, 9, and 12%) were investigated. Volume changes of dough, moisture contents(p<0.001), and baking loss rate(p<0.001) decreased with increasing levels of Chinese artichoke powder. In addition, with an increase in the level of Chinese artichoke powder, the volume and specific volume of white pan breads significantly decreased(p<0.001 and p<0.001, respectively) whereas the weight of white pan breads significantly increased (p<0.001). In terms of color, the lightness(L) decreased, but the redness(a) and yellowness(b) increased with increasing Chinese artichoke powder levels(p<0.001). From the texture profile analysis(TPA) of white pan breads, hardness, chewiness(p<0.05), gumminess(p<0.001), and adhesiveness(p<0.001) increased whereas springiness and cohesiveness(p<0.01) decreased according to the levels of added Chinese artichoke powder. In the attribute difference test, crumb color(p<0.001), grain size(p<0.05) decreased whereas grain uniformity, yeast flavor, acridity flavor(p<0.001), plainer taste(p<0.05), sweet taste(p<0.01), acridity taste(p<0.001), firmness, springiness, moistness, softness, and chewiness increased in accordance with levels of added Chinese artichoke powder. Overall acceptability showed that the sample containing 9% Chinese artichoke powder had the highest score (p<0.001). As a result, the optimal ratio of Chinese artichoke powder for white pan bread was determined to be 9%.

• Journal of Embryo Transfer
• /
• v.29 no.3
• /
• pp.265-271
• /
• 2014

Implementation of smart embryo technologies in cattle e.g. ovum pick-up followed by in vitro embryo production (OPU-IVP). Seasonal variation is important factor for follicular growth, oocytes quality, quantity and developmental competence. Therefore the aim of present study was carried out to investigated whether the seasons (hot and cool) effect on follicular development, oocyte recovery and subsequent embryo development. Follicular oocytes were aspirated from Korean native cows (Hanwoo) by the ovum pick-up (OPU) method, which was performed 24 times during two different seasons, the hot (July to September) and cool (October to December), from OPU donors. The recovered oocytes were classified according to morphological categories and used for in vitro embryo production (IVEP). The mean number of total follicles was significantly higher (p<0.05) during the hot season ($18.32{\pm}2.26$) compared to cool season ($15.41{\pm}3.34$). Furthermore, seasons did not significantly effect on the number of oocytes recovered (hot season: 41.16% vs. cool season: 46.14%). However, the average number of Grade A oocytes was significantly greater during hot ($1.75{\pm}1.86$) season compared to the cool season ($1.00{\pm}1.46$), but there was no significant difference of other grades oocytes. The cleavage rate (hot: 66.67% vs. cool: 63.3%) and embryo development (hot: 58.95% vs. cool: 56.97%) did not differ significantly between the seasons. In conclusion, the results of present study suggest that the season (hot and cool) does not have effects on the oocyte recovery and embryo developmental competence of in vitro cultured embryos.