• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.3
• /
• pp.279-292
• /
• 2022

Unexpected anomalies in the geotechnical investigation at design stage may cause problems during tunnel excavation. Therefore, it is important to predict the ground condition ahead of a tunnel face during tunnel excavation in order to prevent tunnel collapse. Despite the fulfillment of an electrical resistivity survey at the tunnel face, the existing electrical resistivity survey program can produce distorted results by the limitation of tunnel modelling. In this background, this study develops a modelling program for an electrical resistivity survey considering the tunnel shape. Numerical simulation and inverse calculation were performed for the electrical resistivity survey in the tunnel using the developed program. As a result, it was proved that the developed program could predict accurately the anomalous object's location and condition ahead of the tunnel face.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.1
• /
• pp.1-16
• /
• 2023

The current study aims to analyze the vegetation characteristics of the rocky slopes in expressway applied by different types of greening work. A field survey on the current status of vegetation were conducted in 50 rock slopes along 13 expressways in two years, 2020 to 2021. Specifically, the type of implemented greening and slope stabilization work, the soil properties, the vegetation coverage, and the emerged species were investigated on a every single slope. As the result of the implemented work types, the soil-media hydroseeding and the gabion work appeared to be the most implemented greening and slope stabilization work, respectively. As a result of the vegetation survey, 126 classification groups (42 families, 93 genera and 126 species) were identified in total and it was observed 26 IAP species and 5 invasive species were growing. The longer the time after greening work, the more frequent appearance of IAP species were observed. Woody species such as Robinia pseudoacacia and Lespedeza bicolo, and perennial herbs such as Artemisia princeps, Erigeron annuus, and Festuca arundinacea were appeared with high frequencies at the rocky slopes in expressway. It was also observed Pinus densiflora, Quercus dentata, Rubus crataegifolius and Miscanthus sinensis which had invaded from the adjacent forests naturally, and the largest number of species were invaded between 5~10 years usually after greening work in this study.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.4
• /
• pp.63-77
• /
• 2023

This study applies reinforcement learning to effectively operate expressway hard shoulder running (HSR). An HSR algorithm was developed, and its effectiveness was evaluated using the VISSIM microscopic simulation program. The simulation evaluated two aspects: mobility and safety. The DQN-based HSR algorithm found speed improvement of up to 26 km/h. Compared to the current method, the difference in the number of conflicts was not significant. Considering the results, a DQN-based HSR operation has a clear effect, and it is necessary to consider adjusting the current operational criteria.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.569-579
• /
• 2010

Tolerable vertical displacement of a bridge is dependent on the superstructure-type, slope, span, and etc.. In the design stage, however, resultant force of cross section is examined supposed that the settlement is 1 cm at the bearing point. And the 1cm is sometimes considered as if the criteria of allowable foundation settlement. It is needed to establish the criteria of the tolerable displacement for the small and middle bridges which are widely used in domestic area. The design data of domestic bridges including expressway bridges were collected and analyzed according to the types of superstructures and foundations. And numerical simulations were conducted for RC rigid frame bridges, PSC girder bridges, IPC girder bridges, PSC box girder bridges, and steel box girder bridges to examine the tolerable displacements.

• Journal of information and communication convergence engineering
• /
• v.18 no.2
• /
• pp.88-93
• /
• 2020

The IEEE 802.11p-based wireless access in vehicular environments (WAVE) [1] communication is a method used exclusively for wireless communication on the road. This technique enables information sharing not only among moving vehicles but also between vehicles and infrastructure [2]. As part of WAVE communication, data is transmitted to and from vehicles in motion; in this case, it is difficult to determine the channel accurately in an outdoor environment owing to the Doppler shift [3]. This paper proposes a new channel estimation scheme for enhancing the reception performance of the IEEE 802.11p-based WAVE system. The proposed technique obtains the initial channel value by estimating the least square in the time domain by inserting a pilot signal for channel estimation into the IEEE 802.11p virtual subcarrier. Subsequently, a least mean square algorithm is applied to the initial channel value to update the estimated channel value. The simulation results obtained using the proposed channel estimation technique confirm its remarkable efficiency.

• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.119-126
• /
• 2014

PURPOSES: Used in transportation planning and traffic engineering, almost traffic simulation tools have input variable values optimized by overseas traffic flow attribution because they are almost developed in overseas country. Thus, model calibration appropriated for internal traffic flow attribution is needed to improve reliability of simulation method. METHODS : In this study, the traffic flow model calibration is based on expressways. For model calibration, it needs to define each expressway link according to attribution, thus it is classified by design speed, geometric conditions and number of lanes. And modified greenshield model is used as traffic flow model. RESULTS : The result of the traffic model calibration indicates that internal congested density is lower than overseas. And the result of analysis according to the link attribution indicates that the more design speed and number of lanes increase, the lower the minimum speed, the higher the congested density. CONCLUSIONS: In the traffic simulation tool developed in overseas, the traffic flow is different as design speed and number of lanes, but road segment don't affect traffic flow. Therefore, these results need to apply reasonably to internal traffic simulation method.

• Journal of Navigation and Port Research
• /
• v.37 no.5
• /
• pp.535-541
• /
• 2013

Expressways are built to provide for high levels of safety and efficiency in the movement of large traffic volumes at high speeds. However, Gyeongbu and Namhae expressways in the country which are often suffering from the transportation problems with increased import and exoprt cargo trucks including the container vehicles are the major expressways having the Busan Port as the origin and destination regions, and are required to study the expressway traffic characteristics for reducing the transportation problems. We therefore attempted to suggest the expressway density predictive model through the correlation analysis between lane occupancy and mean density at the 8-lane basic segments of the above major expressways in the country.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.5
• /
• pp.13-21
• /
• 2020

In this study, the reliability of the lateral spring constant (k1) applied during design of pile foundation for bridge abutment was evaluated. To do this, the reliability of the factors related to the prediction of the lateral displacement of the abutment pile foundation, which was designed based on the displacement method proposed by Chang (1937), was analyzed. The data used for analysis were the design statements of ◯◯ bridge and ◯◯ IC2 bridge. Then, it was derived by comparing with the numerical analysis (p-y analysis) based on the basic data.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.4
• /
• pp.169-178
• /
• 2020

In a previous paper, ambient vibration tests were conducted on a cable stayed bridge with resilient-friction base isolation systems (R-FBI) to extract the dynamic characteristics of the bridge and compare the results with a seismic analysis model. In this paper, a nonlinear seismic analysis model was established for analysis of the bridge to compare the difference in seismic responses between nonlinear time history analysis and multi-mode spectral analysis methods in the seismic design phase of cable supported bridges. Through these studies, it was confirmed that the seismic design procedures of the "Korean Highway Bridge Design Code (Limit State Design) for Cable Supported Bridges" is not suitable for cable supported bridges installed with R-FBI. Therefore, to reflect the actual dynamic characteristics of the R-FBI installed on cable-supported bridges, an improved seismic design procedure is proposed that applies the seismic analysis method differently depending on the seismic isolation effect of the R-FBI for each seismic performance level.

• Geomechanics and Engineering
• /
• v.21 no.2
• /
• pp.215-226
• /
• 2020

The magnitude and distribution of tunnel deformation were widely discussed topics in tunnel engineering. In this paper, a three-dimensional (3D) finite element program was used for the analysis of various horseshoe-shaped opening expressway tunnels under different geologies. Two rock material models - Mohr-Coulomb and Hoek-Brown were executed in the process of analyses; and the results show that the magnitude and distribution of tunnel deformation were close by these two models. The tunnel deformation behaviors were relevant to many factors such as cross-sections and geological conditions; but the geology was the major factor to the normalized longitudinal deformation profile (LDP). If the time-dependent factors were neglected, the maximum displacements were located at the distance of 3 to 4 tunnel diameters behind the excavation face. The ratios of displacement at the excavation face to the maximum displacement were around 1/3 to 1/2. In general, the weaker the rock mass, the larger the ratio. The displacements in front of the excavation face were decreased with the increasement of distance. At the distance of 1.0 to 1.5 tunnel diameter, the displacements were reduced to one-tenth of the maximum displacement.