• Transactions on Electrical and Electronic Materials
• /
• v.6 no.4
• /
• pp.135-139
• /
• 2005

In this paper, negative SU-8 photoresist processed at low temperature is characterized in terms of delamination. Based on a $3^3$ factorial designed experiment, 27 samples are fabricated, and the degree of delamination is measured for each. In addition, nine samples are fabricated for the purpose of verification. Employing the. neural network modeling technique, a process model is established, and response surfaces are generated to investigate degree of delamination associated with three process parameters: post exposure bake (PEB) temperature, PEB time, and exposure energy. From the response surfaces generated, two significant parameters associated with delamination are identified, and their effects on delamination are analyzed. Higher PEB temperature at a fixed PEB time results in a greater degree of delamination. In addition, a higher dose of exposure energy lowers the temperature at which the delamination begins and also results in a larger degree of delamination. These results identify acceptable ranges of the three process variables to avoid delamination of SU-8 film, which in turn might lead to potential defects in MEMS device fabrication.

• Corrosion Science and Technology
• /
• v.22 no.3
• /
• pp.175-186
• /
• 2023

Effects of high-temperature environment and low-temperature environment on corrosion behaviours of 18Cr stainless steels (type 304L, type 441) in simulated selective catalytic reduction (SCR) environments were studied using weight loss test in each environment and rust analysis. With time to exposure to the high-temperature environment, type 441 was more resistant to corrosion than type 304L due to both higher diffusivity of Cr and lower thermal expansion coefficient in α-iron. The former provides a stable protective Cr₂O₃ layer. The latter leaded to low residual stress between scale and steel, reducing the spallation of the scale. With time to exposure to the low-temperature environment, on the other hand, type 304L was more resistant to corrosion than type 441. The lower resistance of type 441 was caused by Cr-depleted zone with less than 11% formed during the pre-exposure to a high-temperature environment, unlike type 304L. It was confirmed by results from the crevice corrosion test of sensitised 11Cr steel. Hence, to achieve higher corrosion resistance in simulated SCR environments, ferritic stainless steels having lower thermal expansion coefficient and higher diffusivity of Cr but containing more than 18% Cr are recommended.

• Journal of Korean Living Environment System
• /
• v.24 no.1
• /
• pp.95-106
• /
• 2017

The purpose of this study was to evaluate comfort functions while wearing firefighters' protective gloves in dry and wet conditions at $70^{\circ}C$ air temperature with radiant heat. Four types of firefighting gloves from Korea, Germany, United States, and Japan were evaluated in both dry and wet conditions by eight male firefighters. Firefighters put their hands and forearms wearing gloves into a hands-radiant chamber that maintained at an air temperature of $70{\pm}2^{\circ}C$ ($T_a$) and globe temperature $106^{\circ}C$ ($T_g$). During the exposure, subjects followed a fixed protocol of manual movements and stopped the exposure when they felt being intolerable. Results showed that completion time was extended by 6 min on average when gloves got wet and 15 min for the Japanese gloves was extended when compared to its dry condition (p<.001); microclimate humidity on the palm at the last stage was greater for wet conditions than dry conditions in the all gloves; and skin temperatures on mid-fingertip, palm, and hand were significantly lower for wet conditions than dry conditions especially for Japanese gloves (p<.001). These results indicate that the exposure time without thermal pain to radiant heat could be extended by wetting gloves during the low radiant heat exposure.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.5
• /
• pp.742-747
• /
• 2007

In order to investigate the mechanism of adaptation to long-term heat stress, six female buffalo calves of about 7 to 8 months age, were exposed to the cool-comfort environment (THI 65) for 21 days to obtain normal values of blood acid-base. An adaptive response of acid-base regulation was determined to long term (21 days) exposure of buffalo calves to hot-dry (THI 80) and hot-humid (THI 84) conditions. Higher rectal temperature and respiratory rate was recorded under hot-humid exposure compared to hot-dry. Significant reduction in the rectal temperature and respiratory rate on day 21 of hot-dry exposure indicated early thermal adaptation compared to hot-humid. Decreasing rectal temperature and respiratory rate from day 1 to 21 was associated with concurrent decrease in blood pH and pCO2. Increased plasma chloride concentration with low base excess in blood and in extracellular fluid suggested compensatory response to respiratory alkalosis. Reduced fractional excretion of sodium with increased fractional excretion of potassium and urine flow rate indicated renal adaptive response to heat stress.

• Fisheries and Aquatic Sciences
• /
• v.18 no.2
• /
• pp.195-202
• /
• 2015

The effects of waterborne arsenic (As) exposure on bioaccumulation and antioxidant defenses were examined in the liver and gills of tilapia, Oreochromis niloticus, under thermal stress. Tilapia were exposed to different As concentrations (0, 200, and $400{\mu}g\;L^{-1}$) at three water temperatures (20, 25, and $30^{\circ}C$) for 20 days. After As exposure, higher levels of As accumulation were observed in the gills compared with the liver in elevated water temperatures. In terms of the antioxidant response, glutathione (GSH) levels and the activities of glutathione reductase (GR), glutathione peroxidase (GPx), and glutathione S-transferase (GST) significantly decreased in the liver and gills of tilapia exposed to As for 20 days, regardless of the As concentration (200 and $400{\mu}g\;L^{-1}$) or water temperature. These enzyme activities exhibited greater fluctuations in the liver and gills of tilapia after As exposure in water warmer than $20^{\circ}C$. The present findings suggest that the simultaneous stress of temperature change and As exposure can accelerate As accumulation and alter the antioxidant enzymes activities of tilapia.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.6
• /
• pp.149-156
• /
• 2017

In this paper, we propose to enhance a Physical working conditions to decrease absence from work. we demonstrated the correlation of worker's absence with various environmental factors in workplace by surveying 6,962 workers. As result, first, concerning exposure to physical work factors, most of them complained of vibration, and concerning exposure to improper working posture, most of them complained of repetitive arm and hand motions. Second, the absence experience had correlations with age, monthly income, smoking, number of employees, long term working, and shift work, and of the physical factors, hand vibration, noise, high temperature, low temperature and improper working posture had correlations with physical pain posture, movement of people and carrying heavy materials. Third, experience of exposure to hand vibration, noise and low temperature of the physical factors had impact on absence, and of the improper working posture, physical pain posture and carrying heavy stuff had impacts on absence. Through this study, it was found that of the work factors of Korean workers, physical factors and improper working posture had impacts on absence. The results of this study confirmed that physical factors and inappropriate working posture among work factors influenced the absenteeism. Therefore, it is required to improve the work environment regarding physical risk factors and prepare a systematic management plan.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.175-182
• /
• 1996

This paper deals with the properties of water permeability and porosity of cement mortar substrate coated with siliceous slurry coating under the exposure environment. Conditions of exposure enviornment are four kinds of in constant temperature water and humidity box, in indoor and outdoor exposure. Coated mortar substrate was expected continually increase in water and humidity condition, but was not in dry condition. Watertightness effect of siliceous coating was better in the condition of humidity then the dry condition, and the pore volume was decreased in that condition.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.3
• /
• pp.357-362
• /
• 1994

Five adult sheep were exposed to intermittent cold for 12 h (18:00-06:00) at an air temperature of $5{\pm}1^{\circ}C$ followed by 12 h (06:00-18:00) at $25{\pm}2^{\circ}C$ over a period of 8 days continuously. Carotid artery blood (Tc), mean skin (Ts) and mean body (Tb = 0.86 Tc + 0.14 Ts) temperatures, heat production rate (HP), respiratory evaporative heat loss, respiration rate (RR) and volume were measured before and after exposure. Tc during the 12 h cold period of intermittent cold exposure was similar to that during the corresponding period in the warm environment, while Tc in the $25^{\circ}C$ of intermittent cold was higher (p < 0.05) than that in the corresponding period in the warm environment. Ts during the cold period markedly decreased (p < 0.001) by about $9^{\circ}C$ when compared with that in the corresponding time period in the warm environment, while Ts during the $25^{\circ}C$ period of intermittent cold recovered to a similar level to that in the warm environment. Tb was lower (p < 0.001) during the cold period of intermittent cold, whereas a slight increase in Tb during the $25^{\circ}C$ period of intermittent cold was significant (p < 0.05) when compared with the value during the similar period in the warm environment. HP was greatly increased (p < 0.001) by cold exposure, followed by an immediate decrease during the first one hour of the 12 h warm period, reaching a similar level to that in the warm environment. A lower (p < 0.05) RR was observed during both the cold and $25^{\circ}C$ period of intermittent cold than during the corresponding periods in the warm environment. The results of the present investigation clearly show that the body temperature of sheep increased during a 12 h warm period following 12 h of exposure to cold. These results suggest that during a warm period of an intermittent cold exposure cycle, heat could be shored in the animal body.

• Safety and Health at Work
• /
• v.14 no.3
• /
• pp.325-331
• /
• 2023

Background: Heat stress is a harmful physical hazard in many occupational settings. However, consequences of occupational heat exposure among workers in a sugarcane factory in Ethiopia are not well characterized. This study aimed to assess the level of occupational heat exposure-related symptoms and contributing factors. Methods: In this cross-sectional study, five workstations were selected for temperature measurement. Heat stress levels were measured using a wet-bulb globe temperature index meter. A stratified random sampling technique was used to select 1,524 participants. Heat-related symptoms were assessed using validated questionnaires. Results: The level of occupational heat exposure was 72.4% (95% CI: 70.2%-74.8%), while 71.6% (95% CI: 69.3%-74.9%) of participants experienced at least one symptom related to heat stress. The most common heat-related symptoms were swelling of hands and feet (78%), severe thirst (77.8%) and dry mouth (77.4%). The identified risk factors were a lack of reflective shields (AOR: 2.20, 95% CI: 1.53, 3.17), not-enclosed extreme heat sources (AOR: 1.76, 95% CI: 1.23, 2.51), a lack of access to shade (AOR: 9.62, 95% CI: 6.20, 14.92), and inappropriate protective clothing provision (AOR: 1.58, 95% CI: 1.27, 2.71). Conclusions: The burden of occupational heat exposure and heat-induced symptoms was high. Lack of reflective shields, the absence of enclosed extreme heat sources, a lack of access to shade, and inappropriate protective clothing provision were considerable attributes of heat stress. Therefore, the use of mechanical solutions to stop heat emissions at their sources and the key factors identified were areas for future intervention.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.3
• /
• pp.583-597
• /
• 1998

The purpose of this study was to evaluate temperature change occurred in enamel, dentin and pulp due to the heat from cavity prepration with laser. We made three models had different cavity depth: cavity depth of model A was 3.52mm, model B was 2.32mm, model C was 1.16mm. We irradiated cavity base with thermal capacity of $30J,100J,300J/cm^2s$ during few seconds and studied the change of temperature in tooth during 10 seconds, and estimated change of thermal capacity by different irradiated site and exposure time. At $300J/cm^2$ irradiation for 2 seconds, the temperature of irradiated surface was elevated fast according to irradiated thermal energy during 1 second. In proportion to continuous exposure time, temperature elevated slowly. The surface temperature was $1370^{\circ}C$. After discontinue of thermal irradiation, the heat of irradiated surface was diffused in dentin and pulp and the greatest temperature was made. The greatest temperature was disappeared within 10 seconds The greatest temperature of the inner part of model brought about very severe change by different depth. Temperature in pulp was raised by the greater irradiated energy density and exposure time.