• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.2019-2024
• /
• 2021

For evaluating the radiological safety of dismantled concrete, the process of disposal and recycling of the radioactive concrete generated during the dismantling of Kori Unit 1 is analyzed. Four scenarios are derived based on the analysis of the concrete recycling and disposal process, and the potential exposure to the workers and public during this process are calculated. VISIPLAN and RESRAD code are used for evaluating the dosages received by the workers and public in the following four scenarios: concrete inspection, transport of concrete by the truck driver, driving on a recycled concrete road, and public living near the landfilled concrete waste. Two worker exposure scenarios in the processing of concrete and two public exposure scenarios in recycling and disposal are considered; in all the scenarios, the exposure dose does not exceed the annual dose limit for each representative.

• Safety and Health at Work
• /
• v.8 no.1
• /
• pp.105-115
• /
• 2017

Background: The goal of this study is to develop a general population job-exposure matrix (GPJEM) on asbestos to estimate occupational asbestos exposure levels in the Republic of Korea. Methods: Three Korean domestic quantitative exposure datasets collected from 1984 to 2008 were used to build the GPJEM. Exposure groups in collected data were reclassified based on the current Korean Standard Industrial Classification ($9^{th}$ edition) and the Korean Standard Classification of Occupations code ($6^{th}$ edition) that is in accordance to international standards. All of the exposure levels were expressed by weighted arithmetic mean (WAM) and minimum and maximum concentrations. Results: Based on the established GPJEM, the 112 exposure groups could be reclassified into 86 industries and 74 occupations. In the 1980s, the highest exposure levels were estimated in "knitting and weaving machine operators" with a WAM concentration of 7.48 fibers/mL (f/mL); in the 1990s, "plastic products production machine operators" with 5.12 f/mL, and in the 2000s "detergents production machine operators" handling talc containing asbestos with 2.45 f/mL. Of the 112 exposure groups, 44 groups had higher WAM concentrations than the Korean occupational exposure limit of 0.1 f/mL. Conclusion: The newly constructed GPJEM which is generated from actual domestic quantitative exposure data could be useful in evaluating historical exposure levels to asbestos and could contribute to improved prediction of asbestos-related diseases among Koreans.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.2
• /
• pp.226-235
• /
• 2020

Objectives: This study was to investigate the signs and notations of skin absorption, carcinogenicity, germ cell mutagenicity, and reproductive toxicity in the occupational exposure limits of Korea and of other advanced countries. Methods: Information on occupational exposure limits in Korea, the USA, the UK, Germany, and Japan was investigated through the Internet, and items marked as carcinogenicity and skin absorption were compared by country. Results: Legal occupational exposure limits have been greatly simplified. However, in the case of HSE WEL, skin absorption, carcinogenicity classification, sensitization, and in the case of DFG MAK, skin absorption, carcinogenicity, pregnancy risk group, germ cell mutagenicity, airway and skin sensitization, photo contact sensitization, and vapor pressure were provided. Conclusions: It is desirable to indicate the carcinogenicity and skin absorption within permissible limits, and to include information on critical effects in chemical substance exposure limits to uphold the right to know of industrial hygienists and workers in Korea. It is also necessary to clarify the precautions, limitations and protections for skin absorption.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.135-141
• /
• 2012

This study was conducted to evaluate the characteristics of exposure to asbestos for ship repair workers in Korea by a systematic review. The number of articles studying asbestos exposure levels from ship repair workplaces was found to be 4. All asbestos concentration reported as either geometric mean and geometric standard deviation or ranges were transformed to arithmetic mean to estimate exposure level. In addition, weighted arithmetic means(WAMs) were calculated by weighing of the different number of samples. The WAM concentrations were 2.746 f/cc during asbestos dismantling work, 0.034 f/cc before asbestos dismantling work and 0.065 f/cc after working respectively. The maximum airborne concentration of asbestos during asbestos removal work was 7.02 f/cc which was 70 times higher than the occupational exposure limit of Korea, 0.1 f/cc. This study recommends that retrospective exposure to asbestos based on various ship types and operations should be assessed.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.3
• /
• pp.349-356
• /
• 2022

Nuclear power plant decommissioning generates significant concrete waste, which is slightly contaminated, and expected to be classified as clearance concrete waste. Clearance concrete waste is generally crushed into rubble at the site or a satellite treatment facility for practical disposal purposes. During the process, workers are exposed to radiation from the nuclides in concrete waste. The treatment processes consist of concrete cutting/crushing, transportation, and loading/unloading. Workers' radiation exposure during the process was systematically studied. A shielding package comprising a cylindrical and hexahedron structure was considered to reduce workers' radiation exposure, and improved the treatment process's efficiency. The shielding package's effect on workers' radiation exposure during the cutting and crushing process was also studied. The calculated annual radiation exposure of concrete treatment workers was below 1 mSv, which is the annual radiation exposure limit for members of the public. It was also found that workers involved in cutting and crushing were exposed the most.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.112-124
• /
• 1999

The purposes of this study were to provide the data for composition of ethylene glycol ethers and 2-ethoxyethyl acetate(EEA) exposure assessment of workers in various industrial operations. In this study, 80 thinners were analyzed to identify their composition and the air concentration of 2-ethoxyethyl acetate(EEA) and urinary 2-ethoxyacetic acid(EAA) were measured. In this study the subjects were the total of 183 drawn from 98 workers who were occupationally exposed to EEA and 85 workers who were not. The results were as follows: 1. There were found average 4.2 components in each thinner. 2. There were 90 components(26.9%) in ethylene glycol ethers of total of 334 detected organic solvents 3. Ethoxyethyl acetate, ethoxyethanol, buthoxyethanol, methoxy-ethanol were found in 30(37.5%), 27(33.8%), 19(23.8%), 2thinners(2.5%), respectively and their contents were average 18.5%. 4. Benzene was found 8 thinners(10.0%) of the total 80 surveyed. 5. In the electronic painting workers EEA exposure concentration was the highest, as showed 2.88ppm(0.01~15.1ppm), cases of exceeded threshold limit value(TLV=5ppm) were 7(10.6%) workers among the total of 98 exposed workers. 6. The geometric mean of urinary EEA in exposed workers was 1.61 mg/gcreatinine, and was higher than that of workers who were not exposed. In the electronic painting workers and offset printers, the geometric mean of urinary EAA was the highest showing 2.8 mg/gcreatinine. 7. The correlation coefficient between urinary concentration of EAA and air concentration of EEA was 0.90(P<0.05). The present results suggest that composition of ethylene glycol ethers in thinners must be evaluated when industrial hygiene surveys and biological monitoring are performed.

• Journal of Environmental Health Sciences
• /
• v.34 no.4
• /
• pp.279-284
• /
• 2008

This paper aims to provide basic data for work environment control, prevention of worker exposure to asbestos and improvement of air quality to protect workers ‘health after measuring the level of airborne asbestos and workers' exposure in a shipbuilding repair businesses. For this study, a total of 27 samples were collected from 27 workers who had been exposed to asbestos during engine, piping, boiler and other manufacturing processes in 'A' Shipbuilding Repair Company in Gyeongnam. This research was conducted from Oct. 1 to 30, 2007 and had the following results: The target group (27 workers) consisted of all men with an average age of 35.9 years and 6.6 years of work on average. Among them, fifteen 15 (55.6%) were smokers. In terms of their duties at work, there were 12 plumbing repair engineers (44.4%), 8 boiler repair engineers (29.6%) and 7 engine engineers (25.9%). The geometric mean concentration of airborne asbestos was 0.004 f/cc. A total of 4 samples exceeded the exposure limit. In particular, three exceeded the legal limit by more than double, which means that some workers have been highly exposed to asbestos. In terms of the concentration of asbestos fibres by work process, plumbing repair was the highest (0.0071 f/cc($0.001{\sim}0.57\;f/cc$)) while boiler was the lowest (0.0015 f/cc($0.001{\sim}0.007\;f/cc$)). Based on this study, proper action needs to be taken as soon as possible to protect workers from the threat of asbestos.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.1
• /
• pp.13-20
• /
• 2019

Objective: This study was performed to propose a domestic occupational exposure limit(OEL) following a health hazard assessment, calculation of a non-carcinogenicity reference concentration worker($RfC_{worker}$) value, and examination of international agencies' exposure limits. It also recommends legal management within the Occupational Safety and Health Act for PHMG-Phosphate(CAS No. 89697-78-9), It is a humidifier disinfectant that generated many lung injuries. Methods: We have investigated the recommendation or guidelines of foreign OEL for PHMG-Phosphate and the actual state of legal management in Korea. To examine the procedures and methods for recommendation OEL. Toxicological hazard and health hazard classifications were examined and a non-carcinogenicity $RfC_{worker}$ value was calculated for PHMG-Phosphate. An OEL and the necessity of legal management were recommended as well. Results and Conclusions: The OEL for PHMG-Phosphate is recommended to be $0.01mg/m^3$. The recommended OEL is close to 10 times the RfCworker value of $0.000833mg/m^3$ calculated from the chemical dose-response hazard assessment, which is a 2017 study. The CMIT/MIT(3:1) mixture, which was a social issue as a humidifier disinfectant substance, was also exposed to the same ratio in March 2018, establish the OEL. It is recommended to establish OEL for PHMG-Phosphate to prevent worker health hazards and for chemical safety management.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.148-155
• /
• 2013

Objectives: This study was performed in order to compare the average levels and similarity of occupational exposure limits in South Korea, the U.S., the E.U., Germany, Japan and Finland. Methods: In this study, occupational exposure limits (OELs) for one hundred and seventy seven hazardous substances which are managed in the workplace by the Occupational Safety and Health Act in South Korea were matched with those of other countries. The units for the exposure limits of the same substance (identical CAS number) were unified and the exposure limits in each country were compared with threshold limit values (TLVs) of the American Conference of Governmental Industrial Hygienists (ACGIH) using a geometric mean method. Geometric similarity was calculated to assess the association by each country. Results: The exposure limits according to ACGIH TLVs in South Korea, the E.U., Germany, Japan, and Finland were 148, 37, 76, 90, and 110, respectively. When using TLVs of ACGIH as a standard, the geometric mean ratios of Germany, Finland, the E.U., South Korea, and Japan were 0.79, 0.80, 0.82, 1.19, and 1.27, respectively. Geometric similarity with TLVs of ACGIH was highest in South Korea (0.75) followed by Japan (0.56), the E.U. (0.52), Finland (0.50), and Germany (0.46). Conclusions: Through the comparison of levels of OELs and similarities among South Korea, the U.S., the E.U., Germany, Japan, and Finland, we could better understand the characteristics of occupational exposure limits by country.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.2
• /
• pp.146-155
• /
• 2015

Objectives: The aims of this study were to set up benzene exposure matrices according to industry and process and to assess the risk of those occupational exposure to benzene. Methods: The benzene exposure matrices were assembled depending on industry and process, based on an exposure database provided by KOSHA(the Korean Occupational Safety and Health Agency), which was gathered from a workplace hazards evaluation program in Korea. These exposure matrices were assessed by Hallmark Risk Assessment tool. Results: The benzene was treated 412 industries sector(36%), 2,747 business places, and 471 industrial processes according to database. The arithmetic mean of past decade 8 hours time-weighted average of airborne benzene concentrations in the workplace was 0.10722 ppm. 1.07% of the total sample were greater than OEL, and 59.8% were showed less than the limit of detection. The highest risk values(Danger Value) were seen 36 industries including manufacture of general paints and similar product and 12 processes, such as other painting of manufacture of metal fabricated members. Exposure matrices based on employee exposure data base may provide exposure histories and can be used in epidemiological studies. Conclusions: It was found that more attentions should be paid to 36 among 412 industries and 12 of 471 processes, with a higher risk value.