• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.3
• /
• pp.163-169
• /
• 2017

Objectives: This study was conducted toestimate quartz concentrations and contents in the airborne respirable dust from various industries. Methods: A total of 818 samples were collected from 174 industries. Respirable dust samples were collected using a cyclone equipped with a 37 mm, $5{\mu}m$ pore size PVC filter. The quartz concentrations were identified using the intensity of the absorption peak of quartz at $799cm^{-1}$ by Fourie Transformed Infrared Spectroscopy(FTIR). Results: The respective geometric means for quartz concentrations in the respirable dust were 0.0050, 0.0049, 0.0025, and $0.0019mg/m^3$ in foundries, ceramics, construction, and cement/stone. The geometric mean of quartz contents analyzed by FTIR were respectively 3.43, 1.99, 1.04, and 0.82% for ceramics, foundries, cement/stone, and construction. The rate of exceeding the Korean Occupational Exposure Limit($0.05mg/m^3$) was 2.03%, but rate of exceeding the American Conference of Governmental Industrial Hygienist(ACGIH) Threshold Limit Value($0.025mg/m^3$) was 7.12%. Conclusions: Given that foundries had a higher quartz concentration, there is a need to reduce respirable dust, such as through wet operation. In order to protect the health of workers exposed to mineral dust, it is necessary to actively consider strengthening the Korean Occupational Exposure Limit.

• Korean Journal of Environmental Agriculture
• /
• v.41 no.3
• /
• pp.153-157
• /
• 2022

BACKGROUND: The residue dissipation pattern of pesticides for agricultural products during the pre-harvest period after the final application is important to prevent the maximum residue limit (MRL) violations in domestic and export markets. The MRL violations of carbendazim are observed more often in chamnamul by pesticide residue management surveys by the Ministry of Food and Drug Safety. The residue level at the pre-harvest interval (PHI) and the residue dissipation constant from the critical good agricultural practice (cGAP) trials could be estimated to meet the MRL and pose a health risk to consumers. METHODS AND RESULTS: Chamnamuls were harvested at 0, 1, 3, 5, 7, 10, and 14 days after application of carbendazim in accordance with critical GAP. The residue analysis in chamnanul was performed by HPLC-DAD with the C₁₈ column. The limit of quantitation of carbendazim was 0.04 mg/kg, and the recoveries were 74.4 - 95.8% at the two spiked levels (LOQ and 10LOQ) of carbendazim. The dissipation rates in chamnamul were calculated from the residues at the sampling days by statistical method at a 95% confidence level. The biological half-lives of residual carbendazim in the field trials 1 and 2 were 4.9 and 4.4 days, respectively. CONCLUSION(S): In this dissipation study, the residue concentrations at the recommended PHI were higher than the established MRL in Korea. Therefore, the MRL is proposed based on the residue data sets from the trials conducted at the same cGAP and the dietary exposure assessment.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.06a
• /
• pp.326-329
• /
• 2005

A worker who grinded the inner parts of camshafts for automobile engines using water-soluble metalworking fluid (MWF) for 14 years was diagnosed with sinusitis. We postulated that the outbreak of sinusitis could be associated with exposure to microbes contaminated in water-soluble MWF during the grinding operation. To suggest responsible agents for this outbreak, quantitative exposure assessment for chemical and biological agents and prevalence of work-related respiratory symptoms by questionnaire were studied. The exposure ranges of MWF mist (0.59 $mg/m^3$to 2.12 $mg/m^3$) measured during grinding exceeded 0.5 $mg/m^3$ of the recommended exposure limit (REL). Grinder's exposures to bacteria, fungi and endotoxins were also generally higher than not only the proposed standards, but also those reported by several studies to identify the cause of respiratory effects. Statistical test indicated that the prevalence rate of reported symptoms related to nasal cavities showed no significant differences among the operations. Evaluation on grinding operation characteristics and quantitative exposure assessment indicated that repeated exposure to MWF mist including microbes contaminated from the use of water-soluble MWF may cause respiratory diseases like sinusitis or at least increase susceptibility to the development of sinusitis

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.1
• /
• pp.19-40
• /
• 2017

A scientific and objective sound exposure criterion for underwater sound damage on fish has been required since there has been many disputes between an underwater sound maker and a fish damage receiver. The existing criteria are still incomplete scientifically owing to a degree of variability of underwater sounds, diversity of fish hearing sensitivity and damage types, etc. This study reviews existing studies on a hearing mechanism of fish species, manmade underwater sound characteristics and sound exposure assessment parameters, and recent sound exposure criteria. A governing equation for damage coverage estimation and damage coverage dependency on sound source level, ambient noise and transmission loss are also reviewed and interpreted based on sound exposure environments. The foreign and Korean (National Environmental Dispute Medication Commission) criteria are reviewed and compared based on scientific aspects. In addition, the deficit and limit of Korean criteria are presented. The objective of this study is to give a direction for related researches and legislation of sound exposure criteria on fish.

• Journal of radiological science and technology
• /
• v.41 no.6
• /
• pp.603-610
• /
• 2018

This study examined the following: accuracy of the exposure conditions in the inverter device and three-phase device; output waveform over the exposure conditions; and average and standard deviation of the output waveform. After assessing whether the dose corresponding to the theoretical dose was presented, the following conclusions were obtained: 1. The accuracy of the tube voltage(kVp) and tube current(mA) exposure time(sec) was within the tolerable level prescribed in Korea's Safety Management Standards. In the error, Inverter device was large the tube voltage and exposure time, the three-phase device was large the tube current. 2. In terms of the output waveform of the exposure conditions and the average and standard deviation of the output waveform, the higher tube voltage and larger tube current resulted in greater standard deviation in pulsation. Moreover, the standard deviation of pulsation was shown to be greater in the inverter device than the three-phase device; there was also greater standard deviation in the inverter device considering the exposure time. 3. Regarding the exposure conditions over the output dose, all linearity showed the coefficient of variation which had an allowable limit of error within 0.05. Although the output dose ratio for the inverter device was 1.00~1.10 times no difference that of the three-phase device, there was almost no difference in dose ratio between the tube currents.

• Corrosion Science and Technology
• /
• v.17 no.6
• /
• pp.301-309
• /
• 2018

If galvanized steel is exposed to an outdoor environment, atmospheric corrosion will occur with time and red rust will form when the sacrificial protection capacity of zinc reaches its limit. With corrosion, the surface appearance of steel changes, and the properties of the exterior materials degrade. In this study, two kinds of galvanized steel, (GA and GI specimens) were subjected to an outdoor exposure test for 36 months in six regions of Korea. Chrominance (color, chroma, and brightness) and glossiness surface analyses were performed. The color change was not significant, regardless of the exposed area or the specimens tested. With increasing exposure times, the GA specimen became blackened by the formation of zinc oxide, and red coloration was increased by the formation of red rust. As the exposure time of GI specimen increased, the surface proceeded to blacken, but no red rust was formed and the color did not change significantly. Regardless of the outdoor exposure area or the specimen, longer exposure times led to lower glossiness, and this behavior appears to be influenced by the formation of zinc oxide.

• Safety and Health at Work
• /
• v.13 no.3
• /
• pp.308-314
• /
• 2022

Background: Occupational cancer is a global health issue. The Korean CARcinogen EXposure (K-CAREX), a database of CARcinogen EXposure, was developed for the Korean labor force to estimate the number of workers exposed to carcinogens by industry. The present study aimed to estimate the intensity of exposure to carcinogens by industry, in order to supply complementary information about CARcinogen EXposure intensity to the K-CAREX. Methods: We used nationwide workplace monitoring data from 2014 to 2016 and selected target carcinogens based on the K-CAREX list. We computed the 95th percentile levels of measurements for each industry by carcinogens. Based on the 95th percentile level relative to the occupational exposure limit, we classified the CARcinogen EXposure intensity into five exposure ratings (1-5) for each industry. Results: The exposure ratings were estimated for 21 carcinogenic agents in each of the 228 minor industry groups. For example, 3,058 samples were measured for benzene in the manufacturing industry of basic chemicals. This industry was assigned a benzene exposure rating of 3. Conclusions: We evaluated the CARcinogen EXposure ratings across industries in Korean workers. The results will provide information on the exposure intensity to carcinogens for integration into the K-CAREX. Furthermore, it will aid in prioritizing control efforts and identifying industries of concern.

• Fire Science and Engineering
• /
• v.10 no.2
• /
• pp.20-27
• /
• 1996

This paper discussed the limit of existing safety controls where the use of land around hazardous industry. There is a gap between engineering evaluation of acceptable criteria for loss reduction and risk exposure to the areas of high risk outside plants from the aspects of risk perception. The paper performed how land use safety could be designed between the density of uses with the duration of risk exposure by type of land use. It concluded the needs of multi-dimensional presentation for an appropriate risk controls on existing and future land use safety.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.7
• /
• pp.69-75
• /
• 1994

A very fine pattern formation process using double exposure is investigated, which can overcome the resolution limit of optical wafer stepper. The very fine pattern can be obtained by moving the edge profile of large pattern by means of moving the stepper stage. The simulation results show that the light transmittance decrease bellow 9%, and the contrast increase to 16.6% for the 0.3$\mu$m photoresist pattern exposeed by the double exposure using i-line wafer stepper. And the experimental results show that fine photoresist pattern as short as 0.2$\mu$m can be obtained without a loss of photoresist thickness. Also, it proves that the depth of focus for 0.3$\mu$m pattern is longer than $1.5\mu$m. And, the very fine negative photoresist pattern was formmed by using the double exposure technique and the image reversal process.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.455-458
• /
• 2001

In this paper, ISO2631-1(1997) was used to assess the vibration and shock transmitted by train seat with respect to possible effects on human health. Evaluations have been performed on the seat acceleration measured in two type of train, Saemaulho and Mugunghwaho. For each train, limiting daily exposure durations were estimated by comparing the frequency weighted root mean square(i.e., r.m.s) acceleration and the vibration dose values(i.e., VDV), calculated according to ISO2631-1(1997) with exposure limits, health guidance caution zones.