• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1C
• /
• pp.78-83
• /
• 2002

Reachability analysis of finite state machines is very useful for many computer-aided design applications such as communication protocol or microprecessor design. We present new techniques to improve approximate reachability analysis. The key idea is to used an iterative approximate reachability analysis technique in which don't care sets derived from previous iterations are used to improve the approximation in subsequent iterations. Experimental results show that the new techniques can improve reachability analysis significantly compared to existing analysis techniques.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.5 no.2 s.13
• /
• pp.75-84
• /
• 2007

All styles began to coexist by recognizing diversity and changeability instead of an absolute value system of beauty or truth in the general culture field of modern society. In other words, the characteristic of deconstructism, which breaks down the boundary between order, balance, style and genre within the texture, is brought out. This characteristic is also having an effect on the field of up style in a hair genre to secure the beauty of incompletion as the beauty of the present time, involving the beauty of ugliness in the boundary of beauty. This study aims at presenting new vision by applying deconstuctism to the up style to express as an original and experimental formative art with various expressive methods. In addition, it aims at being perfect for presenting the creativity and artistry through expressive techniques by formative factor of deconstructive up style to find new methods and directions to design concept with main expressive ability of deconstructive up style.

• Journal of Sensor Science and Technology
• /
• v.11 no.2
• /
• pp.111-117
• /
• 2002

In this paper, we proposed calibration techniques to improve measurement accuracy in the characteristic analysis system for semiconductor devices. Systematic errors can be reduced using proposed calibration techniques. Also, error current reduction procedures including leakage current and offset current are proposed to measure low-level current in pA level. Calibration parameters are calculated and stored by microprocessor using least-square fitting with measured sample data. During measurement time microprocessor corrects measured data using stored calibration parameters. Experimental results show that current measurement error above nA level is less than 0.02%. And they also show that current measurement in pA level can be performed with about 0.2% accuracy.

• PNF and Movement
• /
• v.14 no.1
• /
• pp.59-65
• /
• 2016

Purpose: The purpose of this study was to review articles in order to establish optimal contraction intensity and duration in the performance of relaxation techniques for maximal increase in range of motion. Methods: The Cochrane, EBSCO, Embase, Medline, ProQuest, PubMed, ScienceDirect, and Scopus databases were used to search articles from 1990 to January 2016. The search terms were "contract relax," "hold relax," "muscle energy technique (MET)," and "proprioceptive neuromuscular facilitation (PNF) stretching." Only experimental human studies (randomized controlled trials) that compared the effects of varying intensity and duration of isometric contraction were included. Non-English language and unpublished studies were excluded. Results: A total of 2,156 articles were initially identified, with only five eventually meeting the inclusion and exclusion criteria. Three studies compared the effects of varying intensity in isometric contraction and two studies compared the effects of varying duration in isometric contraction with regard to range of motion (ROM). Two articles suggested that submaximal voluntary isometric contraction was more effective than maximum voluntary isometric contraction (MVIC) in the improvement of ROM. One article showed that a longer contraction time led to greater increases in ROM. Conclusion: Submaximal voluntary isometric contraction was recommended during contract-relax exercises in healthy people. Lack of evidence makes it difficult to suggest the optimal duration of isometric contraction during relaxation techniques. For future research, high-quality evidence will be needed to establish the optimal contraction intensity for maximum improvement of ROM.

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.6
• /
• pp.806-819
• /
• 2012

The objective of this study is to assess the effect of art activities of young children by utilizing the art therapy techniques on the daily stress and social competence of the young children. Out of children at the age of 5 in two classes of H kindergarten in P city, the study of 25 and controlling group of 25 are allocated to make a total number of 50 study objects. After pretests on the surveyed and controlling groups, 2-3times a week, totaling 12times of experimental treatments are made by selecting the art works of easy application on the education fields for the young children. The outcome of this study is as follow. First, the surveyed group participating in the art activities based on art therapy techniques gets lower points than the controlling group in criticism-attacking circumstance, anxious-frustrated circumstance, pride-deteriorated situation and the general daily stress. Second, the surveyed group participating in the art activities based on art therapy techniques gets higher points than the controlling group in positive-social activities, anxious-contracted activities, angry-aggressive activities and the general social competency.

• Journal of Power Electronics
• /
• v.13 no.6
• /
• pp.955-963
• /
• 2013

To acquire a performed and practical solution that is free from chattering, this study proposes the use of an adaptive super-twisting algorithm to drive a single-phase induction motor. Partial feedback linearization is applied before using a super-twisting algorithm to control the speed and stator currents. The load torque is considered an unknown but bounded disturbance. Therefore, a time-varying switching gain that does not require prior knowledge of the disturbance boundary is proposed. A simple sliding surface is formulated as the difference between the real and desired trajectories obtained from the indirect rotor flux oriented control strategy. To illustrate the effectiveness of the proposed control structure, an experimental setup around a digital signal processor (dS1104) is developed and several tests are performed.

• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.97-99
• /
• 2002

Turbulent premixed flames were a subject of many researches for a number of decades. Especially, Borghi suggested a manificent diagram classifying turbulent combustion reasions and Lipatnikov and Chomiak modified this diagram. But this diagram has difficulties tn defining a flame thickness and velocity and measuring integral length scales In addition, recently experimental techniques are being developed, so we can accurately use PIV diagnostics measuring 2D velocity field instead of LDV and make good use of PLIF techniques for obtaining the flame information. In this study, according to developing techniques, suggest a new diagram replacing the existing Borghi diagram. Simultaneous PIV/OH PLIF measurements are used, which measure a shear strain rate and a location of flames, respectively. The shear strain rate represents turbulence and the OH signal indicates the flame information, but there is no geometric Information which is very important to flame quenching. Hence, to consider the geometric information, calculate fractal dimensions of the OH images. So the diagram suggested in this research has three axes which consist of strain rate, OH signal, and fractal dimension and can classify turbulent premixed flames.

• Advances in concrete construction
• /
• v.10 no.3
• /
• pp.247-256
• /
• 2020

In this paper the possibility of using different regression models to predict the mechanical properties of limestone concrete after exposure to high temperatures, based on the results of non-destructive techniques, that could be easily used in-situ, is discussed. Extensive experimental work was carried out on limestone concrete mixtures, that differed in the water to cement (w/c) ratio, the type of cement and the quantity of superplasticizer added. After standard curing, the specimens were exposed to various high temperature levels, i.e., 200℃, 400℃, 600℃ or 800℃. Before heating, the reference mechanical properties of the concrete were determined at ambient temperature. After the heating process, the specimens were cooled naturally to ambient temperature and tested using non-destructive techniques. Among the mechanical properties of the specimens after heating, known also as the residual mechanical properties, the residual modulus of elasticity, compressive and flexural strengths were determined. The results show that residual modulus of elasticity, compressive and flexural strengths can be reliably predicted using an artificial neural network approach based on ultrasonic pulse velocity, residual surface strength, some mixture parameters and maximal temperature reached in concrete during heating.

• Clinical and Experimental Otorhinolaryngology
• /
• v.11 no.4
• /
• pp.288-292
• /
• 2018

Objectives. To investigate the common causes of persistent septal deviation in revision septoplasty and to report the surgical techniques and results to correct them. Methods. A total of 100 consecutive patients (86 males) who had revision septoplasty due to persistent septal deviation from 2008 and 2014 were included in the study. Their mean age was 35.6 years and the mean follow-up duration was 9.1 months. Presenting symptoms, sites of persistent septal deviation, techniques used to correct the deviation, and surgical results were reviewed. Results. The mean interval between primary and revision surgery was 6.2 years. Forty-eight patients received revision septoplasty and 52 received revision septoplasty combined with rhinoplasty. Nasal obstruction was the most presenting symptom in almost all patients. The most common site of persistent septal deviation was middle septum (58%) followed by caudal septum (31%). Correcting techniques included further chondrotomy and excision of deviated portion in 76% and caudal batten graft in 39%. Rhinoscopic and endoscopic exams showed straight septum in 97% and 92 patients had subjective symptom improvement postoperatively. Conclusion. Middle septum and caudal septum were common sites of persistent deviation. Proper chondrotomy with excision of deviated middle septum and correction of the caudal deviation with batten graft are key maneuvers to treat persistent deviation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.215-218
• /
• 2009

In this paper, we analyze the performance of interpolation in demosaicing techniques for single sensor digital camera. We choose BI(bilinear interpolation), ACPI(adaptive color plane interpolation), ECI(effective color interpolation), Ideal ACPI, and EECI(Enhanced effective color interpolation) in the literature of demosacing techniques since they provide low-complexity and substantial image quality. We survey the algorithms and simulate them. To evaluate the methods in terms of objective image quality and complexity, 24 Kodak images will be used in this experiment. Experimental results show that the ECI method is better than others in terms of image quality versus complexity.