• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.2
• /
• pp.338-344
• /
• 2001

According to the MARPOL 73/78 of Convention, all ships should have oil filtering equipment and 15 ppm bilge which satisfy Requirements of MARPOL 73/78. This study is concerned with designing and manufacturing a prototype Oil content Meter(OCM) used in machinery area of ship. The prototype OCM is composed of two parts which are oil content sensing module and data processing unit. The oil content sensing module consists of infra-red light source, photo-diode light receivers, and a glass tube for bilge water sample. The data processing unit has a micro-processor as hard core and peripheral devices. The experimental results of prototype OCM and analysis of collected data reveal linear property between transmitted light and scattered light as long as the bilge water has low level content of oil. And this linear property leads to a oil content detecting method which is programmed and loaded into the data processing unit. The performance of the prototype OCM is compared with that of the commercial OCM in the market.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.183-188
• /
• 1995

Up to date, high-strength concrete pile which is producing in factory sells in the market. But according to the site and the construction conditions, the system to produce high-strength concrete pile directly in site is utilized in advanced country. Such the production system is the technique phenomenon very disirable in the side of quality control in site and the construction schedule, the time and the cost saving. This study is a fundamental experiment including concrete mixing design, non-autoclave curing method and the optimum condition to produce high-strengh concrete pile in site. As results of this study, High-strength concrete pile in site which target strength is 400kg/ $\textrm{cm}^2$ is able to produce it with optimum curing ciondition(75$^{\circ}C$, 9hr)and mixing design.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.723-726
• /
• 2005

As the importance of recycled materials is being emphasized more in the Korean construction market, the production quality has been improved to a significantly high level. Compared to the high quality, however, there are used very limitedly. Among recycled construction materials, recycled aggregates produced through the retreatment of waste concrete are drawing attention because of lack of natural aggregate and heightened consciousness of resource saving and environmental protection and, as a consequence, they are close to natural aggregates in terms of production technology and quality. Despite the high quality and productivity, however,. the utilization of recycled aggregates is very low. Thus, in order to maximize the utility of recycled aggregates, the present study examined the usability of recycled aggregates using both recycled coarse aggregates and recycled fine aggregates together and derived optimal quantity and mixture ratio in the combined use of the two types of recycled aggregate.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.453-454
• /
• 2008

Modern VLSI designs get increasingly complex and time-to-market constraints get tighter. Using high level languages is one of the most promising solutions for improving design productivity by raising the level of abstraction. In high level synthesis process, most important step is scheduling. In this paper, we propose fast and efficient scheduling method under timing constraint based on list scheduling. Experimental results on well known data path intensive designs show fast execution times (less than 0.5 sec) and similar results when compared to optimal solutions [1].

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.825-828
• /
• 1997

The market share of plastic fuel tube in automobile part is now growing rapidly. Especially fuel tube makers have had their efforts to develop tube module not only with dimensional accuracy, spring back and cost competitiveness. In this study, we used steam bending process for heat relaxation on PA12 plastic fuel tube's 128 types experimental bending conditions. we present the results of this process system in term of dimensional accuracy, and spring back.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.618-622
• /
• 2009

About a Structure is performance insulation include air-tight is fundamental performance for energy-saving. The Apartment house of permission balcony enlarged to increase the requirement of market of high-effective door. Since 2001 years the window and wall of insulation performance stronger frailty than keep up performance insulation that increase influence building energy generated heat loss at door. In study on presentation that high-insulation, air-tight door about experimental method and performance standard.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.589-593
• /
• 2014

Recently, the market has been released a lot of excellent NVH performance cars such as hybrid, electric and luxury cars. Therefore, the consumer is a tendency of many sensitive of the noise inside the vehicle than in the past. In order to match the propensity of such consumers, the automotive industry defines the standard of product related to noise generation of a single product. However, it is difficult to reduce the noise of the product to automobile part suppliers to follow these standards. In this paper, we propose a method for evaluating several necessary in order to find a way to reduce the noise.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.119-123
• /
• 2007

Recently, the green roofs market is active, but most constructors use former waterproofing method. So there are a lot of problems in the sub-organization of the green roofs system. I studied to use the block panel for the sub-organization of the green roofs system and I tested about the effectiveness of waterproofing, root barrier, drainage, and insulation. I have not found any problems about waterproofing, root barrier, drainage, and insulation in the results. The sub-organization of the green roofs system using the block panel is effective for waterproofing, root barrier, drainage, and insulation. We can apply it to the dried and unified execution technology.

• YAKHAK HOEJI
• /
• v.18 no.1
• /
• pp.29-38
• /
• 1974

In order to study the residual amounts of absorbed organochlorine pasticides in vegetables, heptachlor and endrin were sprayed 2,4 and 6kg per 10a., respectively, before sowing the seeds in the station. The experiemental study is primarily concerned with the absorption in lettuce nad garland chrysanthemum. The absorption of each pesticide into lettuce and garland chrysanthemum, and residual pesticides in soil by timne have been analyzed by the gas chromtographic method, and the ratio of residual pesticides in vegetablesand soil were estimated. Heptachlor, heptachlor epoxide and endrin in lettuce nad garland chrysanthemum at the market in Seoul area hvae also analyzed and found extremely low level of pesticides in comparison with the level in above experimental vegetables as well as same vegetables in Japan.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.103.1-103.1
• /
• 2003

This study was carried out to investigate sulfur dioxide in herb drugs.(Puerariae Radix, Lycii Fructus, Platycodi Radix, Dioscoreae Rhizoma, Mori Radicis Cortex, Nelumbo Seed, Paeoniae Radix, Remotiflori Radix, Astragali Radix, Polygonatum Rhizome) Experimental subjects included 105 cases of 10 species of herb drugs collected in Kyung-dong market from December in 2001 to February in 2002. Sulfur dioxide was determined by Optimized Monier-Wiliams method. In 65 cases(61.9%) of the 105 cases, we detected $SO_2$ over 10mg/kg. (omitted)