• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.1 s.145
• /
• pp.1-14
• /
• 2006

To improve maritime safety, it is very important not only to make safer design and operation but also to do proper response in case of maritime casualty. The large-scaled casualties will be caused by loss of structural strength and stability due to the progressive flooding and enlargement of damage by the effect of waves and wind. To prevent foundering and structural failure, the prediction of ship motion behavior of damaged ship in wave is necessary. This paper describes the motion behavior of damaged ship in waves through theoretical and experimental studies. A time domain theoretical model of damaged ship motions and accidental flooding, which can be applied to any type of ship or arrangement and considers the effects of flooding of compartments, has been developed. The model tests have been carried out in regular and irregular waves with different wave heights and directions in ship motion basin. Those were performed for three different damaged conditions such as engine room bottom damage, side shell damage and bow visor damage of a Ro-Ro ship. Comparison of theoretical and experimental results was performed.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.2
• /
• pp.81-90
• /
• 2017

The 1MW OTEC (Ocean Thermal Energy Conversion) platform was designed for application in equatorial seas. In this study, the OTEC platform was investigated using numerical and experimental methods. An octagon-shaped OTEC platform was investigated using the Ocean Engineering Basin of KRISO. These experiments included various tests of regular waves, irregular waves and irregular waves with current (wave+current). The responses of the platform in regular waves showed good agreement between the numerical and experimental results, including the motion RAO, wave run up, and mean drift force. The peak period of heave and pitch motions were observed around 0.5 rad/s, and the effect of the total reflection was found under short wave conditions. The standard deviation (STD) of the platform motion was checked in irregular waves of equatorial and Hawaiian seas. The STD of the pitch was less than $4^{\circ}$ different from the operability requirement under equatorial conditions and the surge STD of the wave frequency showed good agreement between the numerical and experimental results. The STD values of the surge and pitch were increased 66.6% and 92.8% by the current effects in irregular waves, but the pitch STD was less than $4^{\circ}$ under equatorial conditions. This study showed that the STD of the surge was affected by spring effects. Thus, the watch circle of the platform and tension of the mooring lines must be evaluated for a specific design in the future.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2016

In order to convert wave energy into large quantities of high-efficiency power, it is necessary to study the optimal converter system appropriate for the environment of a specific open ocean area. A wave energy converter system with a counterweight converts the translation energy induced from the heave motion of a buoy into rotary energy. This experimental study evaluated the primary energy conversion efficiency of the system, which was installed on an ocean generating basin with a power take-off system. Moreover, this study analyzed the energy conversion performance according to the weight condition of the buoy, counter-weight, and flywheel by changing the load torque and wave period. Therefore, these results could be useful as basic data such as for the optimal design of a wave energy converter with a counterweight and improved energy conversion efficiency.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.269-281
• /
• 2014

This paper examines the suitability of using the Computational Fluid Dynamics (CFD) tools, ANSYS-CFX, as an initial analysis tool for predicting the drag and propulsion performance (thrust and torque) of a concept underwater vehicle design. In order to select an appropriate thruster that will achieve the required speed of the Underwater Disk Robot (UDR), the ANSYS-CFX tools were used to predict the drag force of the UDR. Vertical Planar Motion Mechanism (VPMM) test simulations (i.e. pure heaving and pure pitching motion) by CFD motion analysis were carried out with the CFD software. The CFD results reveal the distribution of hydrodynamic values (velocity, pressure, etc.) of the UDR for these motion studies. Finally, CFD bollard pull test simulations were performed and compared with the experimental bollard pull test results conducted in a model basin. The experimental results confirm the suitability of using the ANSYS-CFX tools for predicting the behavior of concept vehicles early on in their design process.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.3
• /
• pp.134-141
• /
• 2001

An experimental method to investigate the dynamic characteristics of buoys in extreme environmental condition is established. Because the buoy model requires a resonable size for accurate experiment, the test condition in model basin that satisfies the similarity law is hardly compatible with capability of test facilities. It is suggested that the linear wave component that is unable to satisfy similarity is separated with others. The model experiment is carried out with mitigated condition for the linear wave components while others including wave drift, current and wind are keeping the similarities. Then, the result can be extrapolated to give the dynamic behavior of buoys n extreme condition because linear wave component is solely responsibly to oscillatory buoy motion and other environmental components are applied as a initial tension. The similarity for current and wind conditions is viewed as equivalence of restoring forces. The validity of proposed method is examined with different types of standard ocean buoys and it indicates that the linearity of measured characteristics is assured with a limitation of resonable distance between test and estimated wave conditions.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.3
• /
• pp.161-169
• /
• 2020

Physical experiments have been performed in a wave basin to investigate change of the wave loading on the crown wall under obliquely incident wave conditions. The measurement was carried out with wave incidence angle of 0, 15, 30 and 45°. The pressure transducers were placed on the front and bottom face of the crown wall to obtain horizontal and uplift force as well. It was found that both the horizontal and vertical force decreases with the incidence angle. Based on the analysis of the experimental data, a formula was suggested to estimate the reduction rate of horizontal and vertical forces under obliquely incident waves.

• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.3
• /
• pp.168-175
• /
• 2015

This study consists of an experimental investigation of the reduction of the second-order roll motion of a semi-submersible platform in head sea conditions by adding hull damping. The second-order heave drift force and roll drift moment are known to be the main triggers that induce the list angle (Hong et al., 2010). Hong et al. (2013) used numerical calculations to show the possibility of reducing the list angle by changing the pontoon shape and adding a damping device on the hull. One of their findings was that the reduction in the list angle due to the increase in pontoon surface damping was significant. A series of model tests were carried out with a 1:50 scaled model of semi-submersible at the KRISO wave basin. The experiments indicated that adding damping on the hull surface effectively suppressed the list angle.

• Journal of Navigation and Port Research
• /
• v.37 no.3
• /
• pp.251-256
• /
• 2013

This paper is mainly concerned with the ship-bank interaction by model test. The experiments for the characteristics of hydrodynamic interaction forces and moments between vessel and bank with a mound were carried out in the seakeeping and maneuvering basin. A series of tests were carried out with ship model in parallel course along a vertical sidewall with a mound with varying lateral spacing between model ship and sidewall, length of sidewall and water depth. From the experimental results, it indicated that the hydrodynamic interaction effects increase as length of sidewall with a mound increases. Furthermore, for lateral spacing less than about 0.2L between vessel and bank, it can be concluded that the bank effects increase largely as the lateral spacing between vessel and bank decreases. However, for spacing between vessel and bank more than about 0.3L, the interaction effects increase slowly as lateral spacing decreases. Also, for the water depth to draft ratio(h/d) less than about 1.5, the hydrodynamic interaction effects increase dramatically as h/d decreases.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.2
• /
• pp.36-43
• /
• 1996

An Attitude Control System for a high speed catamaran with contorl fins in waves is designed and investigated by the experimental methods. An optimal control theory is applied to design the automatic attitude control system of the high speed catamaran for its good seaworthiness. The experimental results performed in KRISO model basin for the displacements and accelerations for the model ship are measured in regular hear waves. Form the epxerimental results the effect of control planes is thought to be incroeasing with speed.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.2
• /
• pp.102-110
• /
• 2014

This paper presents the results of an experimental and numerical study on the towing characteristics of a barge. A series of model tests were carried out at the Ocean Engineering Basin of KRISO. A model with a 1:50 scale ratio was constructed out of wood. First, force coefficient tests were performed in order to obtain the surge, sway, and yaw force coefficients of the barge. The focus was the effect of skeg on the force coefficients. The stability parameter was calculated from the force coefficients. Next, towing tests in calm sea were carried out with different towline lengths and towing speeds. The trajectories of the barge and the towline tensions were measured during the tests. The measured trajectories were compared with numerical simulation results using a cross-flow model. The towing stability of the barge in a calm sea is discussed in detail.