• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.102-107
• /
• 2007

The steel impeller placed in a water pump has been studied with the aim to understand corrosion phenomena on the surface responsible for reducing the pumping efficiency of water inside cooling system. This preliminary experiment includes a period (around 1 month) observation with a powered microscope and weight measurements. The experiments are carried out at different conditions of water and mixtures of water and coolants, based on the water contents of 25%, 50%, 75%, and 100% water (pure tap water). From the visual results of microscopy, most of the steel surface is fitted and clear rusty or corrosion phenomena are noticeable as time goes. In addition, the weight loss of the sample specimen submerged in the water is linearly increased, whereas those in the mixtures of water initially gain weight and become almost constant.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.9 no.1
• /
• pp.39-49
• /
• 2001

Investigation of the performance of an autocascade refrigeration system using the refrigerant mixtures of R744 (carbon dioxide) and R134a (1,1,1,2-tetrafluoroethane) has been carried out by simulation and experiment. Cycle simulation using a constant UA model in heat exchangers has been performed for R744/134a mixtures of the compositions ranging from 10/90 to 30/70 by weight. Variations of mass flow rate of refrigerant, compressor work, refrigeration capacity and COP with respect to mass fraction of R744/134a mixture were presented. Performance test has been executed in the autocascade refrigeration system by varying secondary fluid temperatures at evaporator and condenser inlets. Experimental results match quite well with those obtained from the simulation.

• Journal of Power System Engineering
• /
• v.13 no.1
• /
• pp.46-52
• /
• 2009

The steel impeller placed in a water pump has been studied with the aim to understand corrosion phenomena on the surface responsible for reducing the pumping efficiency of water inside cooling system. This preliminary experiment includes a period (over 5 months) observation with a powered microscope and weight measurements. The experiments are carried out at different conditions of water and mixtures of water and coolants, based on the water contents of 25%, 50%, 75%, and 100% water (pure tap water). From the visual results of microscopy, most of the steel surface is fitted and clear rusty or corrosion phenomena are noticeable as time goes. In addition, the weight loss of the sample specimen submerged in the water is linearly increased, whereas those in the mixtures of water initially be constant and then gain weight linearly.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.9
• /
• pp.47-55
• /
• 2012

This paper investigates the shear properties of crumb rubber-bottom ash mixture reinforced by waste fishing net (WFN). Mixtures used in this experiment consist of crumb rubber and bottom ash (2mm~10mm) with the same weight ratio. In this study several series of direct shear tests were carried out on the five different specimens : unreinforced mixture, reinforced mixtures with 1 or 2 single-layered WFN, reinforced mixtures with 1 or 2 double-layered WFN. The experimental results indicated that the shear properties of reinforced crumb rubber-bottom ash mixture were strongly influenced by reinforcing layer of WFN. It was found that the shear strength and internal friction angle of the mixtures increased with an increase in reinforcing layer of WFN due to interlocking effect and friction between mixture and WFN.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.109-116
• /
• 2021

In order to replace mineral aggregate used as road pavement materials with steel slag aggregate, this present study evaluated mechanical properties of SMA Concrete mixtures using steel slag aggregate as oxidized slag from electric furnace in iron works. The variables of this experiment are the aggregate type of mineral and steel slag and the sieve sized of 10mm and 13mm. The physical properties inclu ding the specific gravity and absorption rate etc. of the slag aggregate mixtu res satisfied the KS standard as asphalt mixtu re. As a resu lt of evalu ating the mechanical properties of the asphalt mixtures, the optimum asphalt content of the slag aggregate mixtures were lower than that of the mineral aggregate mixtures, but other quality standards were all satisfied. In the deformation strength evaluation, the slag aggregate mixtures were measu red slightly higher than that of the mineral aggregate mixtu res, and the dynamic stability test satisfied the 2,000pass/mm standard value in all specimens. And, the moduli of resilient of the slag aggregate mixtures showed an improved value compared with the mineral aggregate mixtures. Therefore, as the resilient rate of the slag aggregate mixtures improved, it is speculated that there will be an effect of improving public performance according to the repeated traffic load of the vehicle.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.10
• /
• pp.1348-1353
• /
• 2010

A grower broiler experiment (from 14 to 35 days of age) was conducted to study the effect of using two commercial mixtures of organic acids (Galliacid$^{(R)}$ and Biacid$^{(R)}$) to substitute antibiotic growth promoter (Eneramycin$^{(R)}$) on performance, carcass characteristics and intestinal microflora. 400 (Ross 308) broiler chicks were used. A basal corn-soybean meal diet were formulated and served as a control treatment. The control diet was supplemented with either 0.06% Galliacid, 0.1% Biacid or 0.02% Eneramycin. Birds fed the Galliacid-supplemented diet had 16% (p<0.001) more gain than the control, while those fed the Biacid- or Enramycinsupplemented diets recorded 3 and 5.5% more gain, respectively. Organic acids mixtures and Enramycin supplementation significantly (p<0.001) improved feed conversion ratio. These results indicated that birds fed either organic acid mixtures or Enramycinsupplemented diets utilized feed more efficiently than those fed the control diet. Galliacid significantly (p<0.01) increased dressing percentage and bursa weight (% body weight). No significant differences were detected on liver, spleen and thymus (% body weight) among treatments. Galliacid or Biacid significantly (p<0.001) decreased intestinal Escherichia coli and Salmonella compared to the control and Enramycin-supplemented diets. Dietary Enramycin significantly (p<0.001) decreased Escherichia coli, but had no effect on Salmonella counts. In conclusion, organic acid mixtures are more efficient than antibiotic growth promoter (Enramycin) in improving broiler performance and decreasing intestinal Escherichia coli and Salmonella spp., and could be successfully used to substitute antibiotic growth promoters in broiler diets. However, not all of the organic acid mixtures gave the same effect either on performance or intestinal bacterial counts.

• Korean Chemical Engineering Research
• /
• v.43 no.6
• /
• pp.728-739
• /
• 2005

An experiment and simulation were performed for hydrogen separation of mixtures by PSA (pressure swing adsorption) process on activated carbon. The binary ($H_2/Ar$; 80％/ 20％) and ternary ($H_2/Ar/CH_4$; 60％/ 20％/ 20％) mixtures were used to study the effects of feed composition. The cyclic performances such as purity, recovery, and productivity of 2bed-6step PSA process were experimentally and theoretically compared under non-isothermal and non-adiabatic conditions. The develped process produced the hydrogen with 99％ purity and 75％ recovery from both processes. Therefore, optimal separation condition was referred multicomponent gas mixtures.

• Horticultural Science & Technology
• /
• v.18 no.1
• /
• pp.33-38
• /
• 2000

This study was conducted in an effort to meet the need for domestic production of hydroponic media and for medium development using recycled hydroponic rockwool slabs. Two experiments were conducted to evaluate the growth of plug seedlings of petunia 'Romeo' in various mixtures including particles of used rockwool slabs (rockwool particles) and wood chips. In the first experiment, seedlings were grown in plugs filled with mixtures of steam- sterilized rockwool particles and chestnut wood chips, which had been weathered for six months and screened through either 2.8 mm or 5.6 mm sieve, at the mixing ratio of 100:0, 75:25, 50:50, 25:75, or 0:100 (v/v). In the second experiment, seedlings were grown in plugs filled with twenty different mixtures of steam-sterilized particles of used hydroponic rockwool slabs with 4 mm chestnut or pine wood chips, coir, peatmoss, or perlite. In the first experiment seedling growth was not affected by particle size of chestnut wood chips, was superior in the control (commercial plug medium) and in 100% rockwool particles, but was suppressed as mixing ratio of chestnut wood chips increased. In the second experiment, leaf length, and shoot fresh and dry weights were the greatest in rockwool particles+peatmoss+coir treatment, followed by rockwool particles+peatmoss treatment. Leaf length was suppressed as ratio of wood chips increased, especially of chestnut wood chips. Root development was the greatest in rockwool particles+peatmoss+perlite treatment, followed by the control, and rockwool particles+peatmoss+coir treatment. The growth was suppressed as the mixing ratio of rockwool particles, peatmoss, or coir decreased.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6C
• /
• pp.377-384
• /
• 2006

Theoretical and experimental study of the unconfined penetration (UP) test was conducted to suggest a new test method (referred to as IUP, Improved Unconfined Penetration) for determination of the tensile strength of compacted sand-bentonite mixtures. The tensile strength of compacted mixtures can be calculated from limit analysis based on the theory of perfect plasticity. The measurement errors in new test method were reduced by improving the UP device. Preliminary experiment results indicate that the tensile strength increases with increasing the disk size, loading rate and pH level. In addition, the disk diameter with 25.4 mm and the loading rate with 0.5%/min~1%/min are most suitable condition for the IUP test. The reliability of IPU test was verified by through the fact that good agreement between the IUP and conventional split tensile test results is observed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.6
• /
• pp.787-796
• /
• 1996

The biodegradation experiment, the TOD analysis and the element analysis for dispersant, Bunker-A oil and Bunker-B oil were conducted to study the biodegradation characteristics of a mixture of Bunker-A oil with dispersant and a mixture of Bunker-B oil with dispersant in the seawater. The results of biodegradation experiment showed 1mg of dispersant to be equivalent to 0.26 mg of $BOD_5$ and to 0.60 mg of $BOD_{20}$ in the natural seawater. The results of TOD analysis showed each 1 mg of dispersant, Bunker-A oil and Bunker-B oil to be equivalent to 2.37 mg, 2.94 mg and 2.74 mg of TOD, respectively. The results of element analysis showed carbon, hydrogen, nitrogen and phosphorus contents of dispersant to be $82.1\%,\;13.8\%,\;1.8\%\;and\;2.2\%$, respectively. Carbon and hydrogen contents of Bunker-A oil were found to be $73.3\%\;and\;13.5\%$, respectively, and carbon, hydrogen and nitrogen contents of Bunker-B oil to be $80.4\%,\;12.3\%\;and\;0.7\%$, respectively. Accordingly, the detection of nitrogen and phosphorus in dispersant shows that dispersants should be used with caution in coastal waters, with relation to eutrophication. The biodegradability of dispersant expressed as the ratio of $BOD_5/TOD$ was found to be $11.0\%$. As the mix ratios of dispersant to Bunker-A oil (3 mg/l) and a mixture of Bunker-B oil (3mg/l) were changed from 1 : 10 to 5 : 10, the biodegradabilities of a mixture of Bunker-A oil with dispersant and Bunker-B oil with dispersant increased from $2.1\%\;to\;7.2\%$ and from $1.0\%\;to\;4.4\%$, respectively. Accordingly, the dispersant belongs to the organic matter group of middle-biodegradability while mixtures in the mix ratio range of $1:10\~5:10$ belong to the organic matter group of low-biodegradability. The deoxygenation rate constant $(K_1)$ and ultimate biochemical oxygen demand $(L_0)$ obtained from the biodegradation experiment and Thomas slope method were found to be 0.125/day and 2.487 mg/l for dispersant (4 mg/l), respectively. $K_1\;and\;L_0$, were found to be $0.079\~0.131/day$ and $0.318\~2.052\;mg/l$ for a mixture of Bunker-A oil with dispersant and to be $0.106\~0.371/day$ and $0.262\~1.106\;mg/l$ for a mixture of Bunker-B oil with dispersant, respectively, having $1:10\~5:10$ mix ratios of dispersant to Bunker-A oil and Bunker-B oil. The ultimate biochemical oxygen demands of the mixtures increased as the mix ratio of dispersant to Bunker-A, B oils changed from 1 : 10 to 5 : 10. This suggests that the more dispersants are applied to the sea for the cleanup of Bunker-A oil or Bunker-B oil, the more decreases the dissolved oxygen level in the seawater.