• ALGAE
• /
• v.29 no.4
• /
• pp.249-265
• /
• 2014

As with land crops, cultivated algae are affected by various diseases ranging from large outbreaks of a disease to chronic epiphytes, which may downgrade the value of the final product. The recent development of intensive and dense mariculture practices has enabled some new diseases to spread much faster than before. A new disease is reported almost every year, and the impact of diseases is expected to increase with environmental change, such as global warming. We observed the incidence of diseases in two Pyropia sea farms in Korea from 2011 to 2014, and estimated the economic loss caused by each disease. Serious damage is caused by the oomycete pathogens, Pythium porphyrae and Olpidiopsis spp., which decreased the productivity of the Pyropia sea farms. In Seocheon sea farms, an outbreak of Olpidiopsis spp. disease resulted in approximately US $1.6 million in loss, representing approximately 24.5% of total sales during the 2012-2013 season. The damage caused by green-spot disease was almost as serious as oomycete diseases. An outbreak of green-spot disease in the Seocheon sea farms resulted in approximately US $1.1 million in loss, representing 10.7% of total sales in the 2013-2014 season in this area. However, the causative agent of green-spot disease is still not confirmed. "Diatom felt" is regarded as a minor nuisance that does not cause serious damage in Pyropia; however, our case study showed that the economic loss caused by "diatom felt" might be as serious as that of oomycete diseases. Bacteria and cyanobacteria are indigenous members of epiphytic microbial community on Pyropia blades, but can become opportunistic pathogens under suitable environmental conditions, especially when Pyropia suffers from other diseases. A regular acid wash of the Pyropia cultivation nets is the most common treatment for all of the above mentioned diseases, and represents approximately 30% of the total cost in Pyropia sea farming. However, the acid wash is ineffective for some diseases, especially for Olpidiopsis and bacterial diseases.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.4
• /
• pp.479-488
• /
• 2008

Some biological activities such as an electron donating capacity, the contents of total polyphenol compounds and flavonoids, fibrinolytic activity and $\alpha$-glucosidase inhibitory activity have been detected in hot water extracts of Ligularia fischeri and Angelica gigas Nakai. To increase the usefulness of the functional ingredients for prevention and improvement of some metabolic disorders, ethanol-treated hot water extracts of Angelica gigas Nakai were prepared. A hot water extract of Ligularia fischeri has 92% of electron donating capacity, 39.4 mg/g of total polyphenol compounds, 24.8 mg/g of flavonoids and 29.8% of $\alpha$-glucosidase inhibitory activity, but no fibrinolytic activity. A hot water extract of Angelica gigas Nakai has 94.7% of electron donating capacity, 5.8 mg/g of total polyphenol compounds, 2.6 mg/g of flavonoids, 0.48 plasmin units of fibrinolytic activity and no $\alpha$-glucosidase inhibitory activity. However, with partial purification using cold ethanol treatment, the $\alpha$-glucosidase inhibitory activity of Angelica gigas Nakai was increased to 70.5%. Thus, we expected a more useful effect with the use of the addition of a cold ethanol-treated Angelica gigas Nakai extract. The L, b values of cold buckwheat noodles using a mixture of 0$\sim$3% of Ligularia fischeri powder and 0.5% of an ethanol-treated hot water extract of Angelica gigas Nakai were decreased with the addition of an increasing amount of Ligularia fischeri powder. Among the mechanical qualities, only adhesiveness was significantly higher in 3% Ligularia fischeri noodles. From sensory evaluation data, it was determined that these two functional ingredients did not ruin the color, texture, and overall acceptance of the cold buckwheat noodles. A higher amount of the extracts improved the quality of the product with little added cost.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.1
• /
• pp.101-110
• /
• 2014

The ministry of Land, Infrastructure and Transport announced that they launched the pilot project to offer Happy House built with modular construction as part of the major projects of incumbent government in 2013. The market size of modular construction is getting increasingly enlarged together with strong will of government. The major challenges that current modular construction encounters can be summed up as lack of standardization of material on the stage of design and fabrication. The portion of material costs in modular construction marks 16 to 17% higher than the existing other construction method, and account for 60 % of total construction cost, which is why material management is the most important factor. However, the imperfect standardization and specification on design causes high loss of materials on fabrication, which makes the construction wastes and total construction cost increasing in accordance with the increase of material costs. This study has been conducted to verify major modules by developing optimization algorithm on gypsum board material among wall finishing materials. It is expected that this paper contributes not only to eco-friendly construction by minimizing the waste factors of materials through these efforts, but also to removing high cost issues which had been recognized as a setback of current modular construction.

• Journal of the Korean Geographical Society
• /
• v.46 no.1
• /
• pp.50-66
• /
• 2011

Biofuel crops and their economical benefits have been recently researched as one of the alternative energy sources. Very few studies, however, have brought an issue about the impacts of the new cropping on environment, especially water quality. Because biofuel cropping requires more crop production with more fertilizers for cost-effectiveness, water quality near the new crops as well as downstream is expected to be degraded. In this study, the impacts of biofuel crop production on water quality was estimated by scenarios between pre-biofuel cropping and post-biofuel cropping using the previously calibrated SWAT (Soil and Water Assessment Tool) model in a watershed in Texas, USA. Then, 30 meter filter strips were implemented on each biofuel ropland as a mitigation method. The economical and agricultural aspect and requirements of biofuel cropping was also previously investigated. The on-site impacts estimation showed that biofuel cropping increased about 250% to 1,150% of Total Nitrogen and about 100% to 1,100% of Total Phosphorous annually. The off-site estimation at the reservoir (entire watershed outlet) showed the annual increase of 40 to 50% for both Total Nitrogen and Total Phosphorous. The on-site effectiveness of filter strips was from 58.0% to 67.9% reduction for Total Nitrogen and 57.7% to 68.2% reduction for Total Phosphorous. The filter strips reduced 28.5% of Total Nitrogen and 29.4% of Total Phosphorous at the watershed outlet.

• Korean Journal of Agricultural Science
• /
• v.35 no.1
• /
• pp.85-100
• /
• 2008

The United States Department of Agriculture (USDA) funded collaborative project on The Economic Feasibility Analysis of Crop Cultivation Practice Project in Pirganj and Kurigram Districts in Bangladesh will started during 2008-2012, for 4 years with total project cost of US$ 571,270. The project will be implemented in 6 villages; has 1,097 hectares areas which is divided into 948 hectares of agricultural land, 52 hectares of forest land and 345 hectares of other land, covered 1,059 households equal to 5,305 persons in Pirganj and Kurigram districts The project has proposed to be implemented in joint collaboration by Bangladesh Agricultural Research Council (BARC), Bangladesh Agricultural Research Institute (BARI) and Rangpur Dinajpur Rural Service (RDRS) Bangladesh with full participation of the farmers' groups of respective project site. The specific objectives of the project are: (1) to estimate the productivity of paddy, wheat, maize, tobacco and sugarcane (2) to determine the cost of production and returns to the above mentioned crops (3) to study the interrelationship between inputs and output of the above mentioned crops and (4) to examine the resource utilization patterns at farm level. In this project analysis, the net incremental profit is US$33,028. The expected incremental project benefit and incremented production cost are estimated as US$ 219,959 and US$ 186,931 respectively. The financial decision making criteria would be followed in this crop cultivation practice project. After the project implementation, the expected project benefits are assumed to be continued for 15 years. The benefit cost ratio (B/C) of the project is estimated at 1.077 (table 11) when using discount rate of 10% as an opportunity cost of capital in Bangladesh. FIRR of project is estimated at 26.15% which is bigger than the opportunity cost by more than double. So this project is financially feasible and acceptable. Therefore, this project should be extended to other areas to increase the farm income and economic growth of marginal poor farmers in Bangladesh.

• The Korean Journal of Applied Statistics
• /
• v.26 no.5
• /
• pp.725-736
• /
• 2013

Retirement income is an important personal and social issue. Problems associated with financial risk wil1 become more pronounced with the growth in the elderly population. Medical expenses in senescence is closely related to financial risk; in addition, some diseases that require long term care will increase financial risk which result in lower quality of life for the elderly. Therefore, it is necessary to understand expected long-term care costs and to manage financial risk from the perspective of an individual. This study evaluate the length of period in which a person is expected to need long term care and actuarial present values of the total cost which needs to be prepared for the care through the Korean public long term care system based on the experience data obtained from Long Term Care Insurance for the Elderly in Korea and a multi-state model.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.4
• /
• pp.88-95
• /
• 2007

Korea is highly dependent on foreign countries for energy while at the same time having a high energy-consumption industrial structure. Therefore, logical improvements in energy use efficiency and nationwide energy saving are becoming more and more important in coping with the worldwidehigh oil prices and environmental issues such as listed in the Kyoto Protocol to the United Nations Framework Convention on Climate Change. Consequently, a study was conducted on the average annual load factor in domestic areas to set a reasonable and reliable technology standard plan for high-efficiency transformers. The average annual load factor in Korea was discovered to be 18.4[%] classified by industry. This factor is expected to be used in arranging a domestic standard for a minimum efficiency system for transformers, and in reviewing and supplementing the standard transformers plan for the High Energy-Efficiency Appliance Certification. The expected effect from the establishment of the technology standards plan for highly efficient transformers is the expansion of the manufacturing and distribution of highly efficient transformers that are suitable for domestic use. These will lead to electricity cost savings for users, strengthening the related industries' market competitive powers and the effective reduction of greenhouse gases on a national level by drastically reducing loss from transformers, which accounts for a large portion of the total electric supply losses.

• Journal of Navigation and Port Research
• /
• v.35 no.8
• /
• pp.657-665
• /
• 2011

This study deals with an integrated problem for deciding sequencing and storage location of export containers together at its receiving operation in the container terminal with a perpendicular layout. The preferred storage location of an export container varies with the priority of the corresponding loading operation and the waiting time of an external truck depends on its storage time. This paper proposes the mixed integer programming model considering the expected arrival time and expected finish time of an external truck and the preferred storage location for its loading operation. And we suggest the heuristic algorithm based on a simulated annealing algorithm for real world adaption. We compare the heuristic algorithm with the optimum model in terms of the computation times and total cost and the performance of the heuristic algorithm is analyzed through a numerical experiment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2724-2730
• /
• 2015

Internet of Things (IoT) is possibly the most widely discussed technological concept in today's technology circles. This technology is expected to dramatically change not only how we work but also how we live. The concept of IoT basically means a web of connected devices which can be controlled over a data network. With cost of technology required to control these devices going down and increasing internet connectivity through smartphones, IoT is expected to be an all pervasive technology in the next 10 years. In this paper, we study the technological landscape of this fast growing technology domain from an Intellectual Property (Patents) perspective. We find that the patent distribution in this domain is very fragmented with the top patent applicants in the field holding around 5% of the total patents. Especially, the US geography has seen the maximum patent filings and is closely followed by the big Asian markets of Japan and Korea.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.877-883
• /
• 2021

Artificial intelligence technology is widely used in industrial and smart home fields such as manufacturing robots, artificial intelligence speakers, and robot vacuum cleaners. In this paper, we designed and implemented a 1:1 chatbot system based on artificial intelligence for use in RCMS (Real-time Cash Management System). The RCMS chatbot implemented in this paper was constructed with a total of 210 query scenarios in nine areas, including research expenses and system usage, based on 13,500 questions and answers from existing online bulletin boards. The chatbot is expected to solve the problem of insufficient number of counselors and to increase user satisfaction by responding to the researcher's inquiries after working hours, and the recommendation service for the cost of use, which had the most inquiries from researchers, reduces the number of consultations. It is expected to improve the quality of answers to other counseling inquiries.