• 한국지열·수열에너지학회논문집
• /
• 제19권4호
• /
• pp.8-17
• /
• 2023

The air temperature is gradually increasing owing to global warming, especially in summer, therefore, the performance of an air source heat pump (ASHP) is expected to be decreased. Accordingly, the performance gap between the ASHP and ground source heat pump (GSHP) should be increased, however, the quantitative comparison has not been yet investigated. In this study, impact of global warming on the performance of the ASHP and GSHP is investigated based on the climate data for 1930, 1980, and 2030. The coefficient of performance (COP) as well as annual power consumption of the ASHP and GSHP are compared and analyzed. In the case of COP, the COP of GSHP hardly changes over the years owing to the constant ground temperature, while that of ASHP decreases by 3.7% for cooling and increases by 0.71% for heating. In the case of annual power consumption, the cooling and heating power consumption of GSHP increases by 12.69% and decreases by 15.58%, respectively, over the year owing to the changes in heating and cooling loads. As for the ASHP, the cooling and heating power consumption increases by 16.64% and decreases by 17.8%, respectively. For a more accurate comparison, power consumption ratio is introduced and shows that total annual power consumption of the GSHP to ASHP decreased from 68% in 1930 to 65% in 2030. Therefore, as global warming accelerates, the effect of reducing power consumption by using GSHP compared to ASHP is expected to be increasing.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.779-782
• /
• 1997

In this paper, accurate position control of a stenciling robot manipulator is designed. The stenciling robot is requried to draw lines and characters on the pavement. Since the robot is huge and heavy, the inertia is expected to play a major role in the tracking performance as desired. Here we are proposing neural network control scheme for a computed-torque like controller for the stenciling robot. On-line compensation is achieved by neural network. Simulation studies with stenciling robot are carried out to test the performance of the proposed control scheme.

• 대한산업공학회지
• /
• 제20권4호
• /
• pp.99-111
• /
• 1994

Toguchi method is a systematic technique for designing high quality product at low cost. There are three steps in the Toguchi method, 1)system design, 2)parameter design, and 3)tolerance design. This paper considers the tolerance design for multiple performance characteristics which is practically important. We present two tolerance design procedures : grade selection and tolerance determining procedures. In grade selection procedure a scheme is presented that minimizes the sum of the price of low-level characteristics and the expected loss due to the variations of high-level characteristics. In tolerance determining procedure we determine the tolerances of the low-level characteristics.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.187-190
• /
• 1999

An experimental study is carried out to estimate the way of applying the granulated blast furnace slag[GBFS] to the lean concrete base of concrete pavement. According to the test results, this application seems promising. For this application, mixing percent of GBFS ranging from 30 to 50 is recommendable at this stage. And performance of base mixed with GBFS is greatly affected by the curing and placing condition. As long as all requirements for application of GBFS to the base is satisfied, better performance is expected.

• 한국정보통신학회논문지
• /
• 제9권1호
• /
• pp.16-21
• /
• 2005

본 논문에서는 라이시안 페이딩 환경에서 DS/CDMA GMSK 변조 시스템을 제안하고, 제안시스템의 성능을 해석하였다. 또한, 제안시스템의 성능개선 기법으로 터보 부호화 기법을 채용하여 음성, 데이터 통신뿐만 아니라 멀티미디어 통신에도 적용가능하리라 예상된다.

• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.145-151
• /
• 2004

In this paper, a pressure control type ratio control valve(RCV) is designed for a metal belt CVT. Steady state and transient characteristics of the pressure control CVT are investigated by simulations and experiments. In addition, P-line is proposed to predict the shift performance. It is found that the bigger the pressure margin, the faster the shift response. It is expected that the P-line can be used in design of the RCV to meet the desired shift performance.

• 산업경영시스템학회지
• /
• 제12권20호
• /
• pp.71-76
• /
• 1989

In this paper, GERT network in modeled to improve the network of manufacturing process with feedback loop. A lot of Information on the GERT network can be derived from the equivalent W-function and MGF(moment generating function) using Mason's rule. These equations are used in calculating the variations of the performance measure and in improving the system performance. System improvement in manufacturing process is achieved by increasing the equivalent probabilities of each branches and by decreasing the expected equivalent time.

• 한국정보통신학회논문지
• /
• 제7권3호
• /
• pp.378-383
• /
• 2003

무선 LAN 시스템을 위한 심볼동기에 대하여 연구되었다. OFDM 방식의 LAN 시스템에서 정확한 심볼동기시점에서의 시간 metric의 평균값과 분산을 이론적으로 구한다. 또한 채널의 다중경로 페이딩과 시간 부분 편차에 의한 심볼동기 성능 저하가, 컴퓨터 시뮬레이션에 의한 방법으로 아울러 분석되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.283-284
• /
• 2008

A cross-layer optimization is becoming a popular design methodology for the IP based next generation wireless network. We begin by investigating a cross-layer optimization scheme to enhance the system performance in wireless networks. By applying cross-layer optimization methodology to WiBro distributed network, the WiBro systems are expected to gain significant performance improvement and resource utilization enhanced. For further study we highlight some open challenges and new opportunities for cross-layer design.

• Journal of Advanced Marine Engineering and Technology
• /
• 제14권1호
• /
• pp.90-98
• /
• 1990

The liquid ejector, having no moving, lubricating and leaking parts, is widely used as the various pumps because of its high working confidence and simplicity. Previously, computer aided design program for the small-sized liquid ejector was developed based on the one-dimensional flow analysis and the systematical laboratory level experiments. Through the present research, it is confirmed that the previously developed computer program to getermine the main design dimensions and to calculate the expected performance curve is satisfactorily applied to design the large liquid ejectors.