• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4_1
• /
• pp.97-106
• /
• 1992

Total length of stream networks and main stream length vary with topographic map scales, and the stream length of drainage basin on topographic map can be viewed as a fractal. Total length of stream network and main stream length are represented as only stream area ratio($R_a$) based on Horton's laws, thereafter the fractal dimensions of stream network and main stream length are derived as a simple function of stream length($R_L$) and stream area ratios($R_a$) respectively. The derived equations of fractal dimension are applied to Sansung basin in Kum River and compared with the equations already existed. The stream network appeared as space filling with fractal dimension near 2 as map scale increases, while main stream length shows near 1. The results of this study are expected to be helpful in the quantitative analysis of drainage network composition with map scale.

• Geomechanics and Engineering
• /
• v.16 no.3
• /
• pp.295-308
• /
• 2018

The excavation of twin tunnels is a process that destabilizes the ground. The stability of the tunnel lining, the control of ground displacements around the tunnel resulting from each excavation and the interaction between them must be controlled. This paper provides a new approach for replacing the costly 3D analyses with the equivalent 2D analyses that closely reflects the in-situ measurements when excavating twin tunnels. The modeling was performed in two dimensions using the FLAC2D finite difference code. The three-dimensional effect of excavation is taken into account through the deconfinement rate ${\lambda}$ of the soil surrounding the excavation by applying the convergence-confinement method. A comparison between settlements derived by the proposed 2D analysis and the settlements measured in a real project in Algeria shows an acceptable agreement. Also, this paper reports the investigation into the changes in deformations on tunnel linings and surface settlements which may be expected if the twin tunnels of T4 El-Harouche Skikda were constructed with a tunneling machine. Special attention was paid to the influence of the excavation phase shift distance between the two mechanized tunnel faces. It is revealed that the ground movements and the lining deformations during tunnel excavation depend on the distance between the tunnels' axis and the excavation phase shift.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.719-726
• /
• 2020

Education policy is a dynamic process featuring social development trends. The world countries have focused their education program on empowering the learners for future life and work. This paper aims to assess the higher education curriculum based on a survey of 280 students, employers, alumni, and lecturers in both social sciences and natural sciences in Ho Chi Minh City, Vietnam. The fuzzy decision-making method, namely the Fuzzy Extent Analysis Method (F-EAM), was applied to measure the relative weight of each parameter. Seven factors under the curriculum development have been put in the ranking. Input with emphasis on foreign language was the highest priority in curriculum development, given the expected demand of the labor market. Objective and learning outcome and teaching activities ranked second and third, respectively. The traditional triangle of teaching content, methodology, and evaluation and assessment are still proven their roles, but certain modifications have been defined in the advanced curriculum. Teaching facilities had the least weight among the seven dimensions of curriculum development. The findings are helpful for education managers to efficiently allocate scarce resources to reform the curriculum to bridge the undergraduate quality gap between labor supply and demand, meeting the dynamic trends of social development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6584-6594
• /
• 2015

This study is intended to come up with the Scale of the danger in the adolescents' school-dropout. The present dissertation developed the questions and collected them on the base of the potential variables, that consist of the school-dropout of adolescents, and the operational definition of each variable, through the verification of the precedent research and the review of the related literatures. In addition, the interviews for the teachers who have experienced the school-dropouts of adolescents are performed and are analyzed, and then the relevant questions were culled. The Scale developed in this study is composed of 48 questions and 10 factors. The questions which have the same factors and clustered are reflected, and then are discerned into 3 dimensions, that is, the outer attitude, the inner attitude, and the attitude of parents. The Scale of the danger in the adolescents' school-dropout which is contrived through this study is expected to prevent school-dropouts to teenagers and the teachers.

• Health Policy and Management
• /
• v.19 no.1
• /
• pp.31-48
• /
• 2009

The objectives of this study were to evaluate the satisfaction of participants in the National Cancer Screening Program(NCSP) and to identify factors affecting the satisfaction. The telephone survey was conducted in July 2007 for the participants who were screened by the NCSP from January through May 2007. Student's t-tests and analysis of variance were performed first to determine if the mean satisfaction score differed by the characteristics of study objects, followed by multiple linear regression analyses to examine the factors affecting satisfaction. Dependent variable was general satisfaction for the screening service, and three dimensions of independent variables - 'sociodemographic characteristics', 'screening characteristics', and 'perceived service quality' - were used for the empirical analyses. Female, old-aged, less educated, Medicaid recipients, rural residents and the participants with normal results were more likely to be satisfied with the NCSP. The results of multiple regression analyses show that gender, age, location of residence, type of screening units, and perceived quality of screening services were significantly related to satisfaction. This study is meaningful as the first attempt to measure participant satisfaction with the NCSP, and to identify factors affecting the satisfaction. Among the identified factors, the NCSP needs to pay attention to perceived quality of service, in particular, to improve the satisfaction. This study is expected to contribute to raising the compliance rate and to improve the quality of the NCSP.

• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.78-82
• /
• 2001

The spatial resolution of $high-T_{c}$ scanning SQUID microscope is limited by the washer size of SQUID and the gap distance between SQUID sensor and the sample. In this work, we tried to improve the spatial resolution of scanning SQUID microscope by reducing the size of SQUID sensor fabricated with $YBa_2$$Cu_3$$O_{7}$ thin film. Outer dimensions of the SQUiDs we tested are 24 $\mu\textrm{m}$ $\times$ $ 28\mu\textrm{m}$, $12 \mu\textrm{m}$ $\times$ $16\mu\textrm{m}$, $12\mu\textrm{m}$ x $12\mu\textrm{m}$, $10 \mu\textrm{m}$ $\times$ $10 \mu\textrm{m}$ each. To operate them in the flux-locked loop scheme, we used a direct-coupled electronics instead of using conventional electronics involving a modulation scheme. Since the direct-coupled feedback scheme does not require modulation current adjustment that poses as a practical difficulty in the SQUID operation in modulation-scheme, the direct feedback operation is rather simpler than the conventional modulation method. The resulting noise features were dominated by the noise of preamp in FLL electronics except that of the largest SQUID. The noise levels of SQUIDs are expected below 1$\times$$10^{-5}$ $\Phi_{0}$H $z^{1}$2/ (at 300 Hz), that is a typical noise level for SQUID made of $YBa_2$C $u_3$$O_{7}$ thin film. The data acquisition and motion-controlling parts were also improved, resulting in faster data acquisition rate and less vibration of the system.m.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.1
• /
• pp.59-79
• /
• 1996

Waterfront redevelopment is an element in the process of inner-city regeneration now widespread in many ports of the world. Academic interest in the processes involved has yielded a literature biased towards specific locations rather than towards the analysis of processes and issues. The redevelopment of urban waterfronts does not, of course, occur exclusively in port cities but is found as a continuous process in most places where settlement and water are juxtaposed, whether or not commercial port activity is or was present. Port cities, however, as a result of the concentration and juxtaposition of urban and maritime influences, generally present the major issues involved in waterfront redevelopment most clearly. In this context, the general aim is to explore Korean dimensions of waterfront redevelopment in a range of port cities in a context of inner-urban renewal; and a specific objective is to examine the views of decision-makers in Korean port cities on the processes involved by a questionnaire method. The focus is on comparative strategies, and in particular upon the factors affecting the balance between social goals and commercial interests. To test the response of four categories of decision-makers in Korean port cities on a number of issues perceived as underpinning the processes involved in waterfront redevelopment, four catergories of respondents-port authority representatives(PO), urban planners(UP), port specialists(PS) and city-government official(GO)-were asked to fill in a questionnaire form. In three out of ten cases, the overall result broadly confirmed the a priori expectation; in six cases the confirmation was partial; and in one other the view of respondent was generally contrary to those anticipated. In many, but by no means all, cases there was substantial agreement between the four categories of respondents, but the range of scores was generally much wider than expected.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.78-83
• /
• 2002

A modified patched grid scheme has been developed and employed for and axi-symmetric unsteady Euler solver based on Roe's FDS to analyze the unsteady flow fields induced by a train and a tunnel. On this paper, the innovative zonal method, named hybrid dimensional approach, was proposed and applied to the train-tunnel interaction problems. The basic idea of this method is to maximize the efficiency of numerical calculations by minimal assumption of spatial dimensions. The hybrid dimensional approach, embedded in the present modified patched grid method, yielded high numerical accuracy as much as the fully axe-symmetric method. The hybrid dimensional approach is expected to reduce the huge computation time of the train-tunnel interaction problems especially in the cases of solving a long tunnel.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.461-473
• /
• 2005

Nanotechnology has attracted great attention as one of essential fields in modern science. In particular, the fabrication of nanostructures with nanometer dimension in size is the starting point and essential part of nanotechnology research. Anodic aluminum oxide (AAO) nanotemplate technique has many merits including ease of fabrication, low cost process, and nanotemplate fabrication in large area. Moreover, AAO nanotemplate technique can realize self-ordered hexagonal pore structure with extremely high aspect ratio which is difficult to achieve with conventional lithographic techniques. Simple control of pore dimensions such as diameter, length, and density by varying anodizing condition would be advantageous, too. AAO nanotemplate has been the topic of intensive investigations for the past decade due to above strong points, and the application to various fields of nanotechnology is expected. In this review paper, the fabrication and application of AAO nanotemplate are introduced.

• Journal of the Korean Home Economics Association
• /
• v.45 no.9
• /
• pp.37-52
• /
• 2007

This research developed maternity wear designed with a focus on the essential functions necessary for working women and adaptable to their body changes during pregnancy. Through Martin's anthropometry for 201 pregnant women, the size specifications for maternity wear was determined and a dress form was proposed, in order to provide the manufacturer with reference data and a prototype to verify their products' fit and suitability. From a monthly analysis on the body measurements of pregnant women, significant monthly differences and after pregnancy were found in weight, chest girth, bust girth, under bust girth, waist girth, and hip girth. Dress form was designed based on the average body measurements of women in their 6th to 10th month of pregnancy. The standard dimensions in the 8th month were 90cm (chest), 94cm (bust), 86cm (under bust), 97cm(waist: most protruding part on the side), and 99cm (hip). Compared with Japan's MAT-9 (for nine months), chest girth was the same, while the Korean waist girth and hip girth were larger by 2cm and 3cm, respectively. The woven fabric blouse was evaluated as having the best appearance, while the knitted fabric one was judged as being more comfortable it terms of functionality. For the pants, the design details of the lowered waist and curved waist belt were more functional. The tailored jacket was the best design for working women in terms of both looks and functionality. To summarize, maternity wear for working women, unlike general maternity clothes, should be designed with consideration for the wearer's somatotype and activity. Elastic materials were appropriate for functionality and dealing with physical changes. With the increasing of working pregnant women, such trials are expected to continue in this research area in order to develop functional maternity wear with multi-purposes such as breast-feeding, wearability after delivery and shielding from microwave.