• Korean journal of food and cookery science
• /
• 제27권5호
• /
• pp.507-522
• /
• 2011

In this study, samples of wheat flour and dough were prepared by adding of 1, 3, or 5% branched dextrin, which is produced from the amylopectin of waxy corn starch using a cyclization reaction with a branching enzyme. The samples were then evaluated qualitatively in terms of farinogram, viscogram, and extensogram characteristics. The fermentation power of dough expansion, extensogram characteristics, specific volume, baking loss, external/internal surface appearance, and sensory qualities were also examined after 4 weeks of storage at -20$^{\circ}C$ to determine the effect on freeze-thaw stability and quality improvement of branched dextrins in the soft roll bread formulation. Furthermore, the samples along with a control were compared regarding their quality characteristics, including changes in moisture content, water activity, color, and textural characteristics during a storage period of 4 days at 20$^{\circ}C$ to determine the effect on preventing retrogradation of the branched dextrin. As the branched dextrin content increased, area and extensibility increased, whereas water absorption, fermentation power of dough expansion, resistance/extensibility ratio, baking loss, and brownness of the crust decreased. However, the control group presented significantly higher peak viscosity, resistance, specific volume, taste, overall acceptability, moisture content, water activity, springiness, cohesiveness, and resilience values than those of the branched dextrin samples, whereas lightness, hardness, and chewiness showed the reverse effect. As the storage period increased, lightness, hardness, and chewiness increased, whereas cohesiveness decreased. In conclusion, the results indicate that adding 1~3% branched dextrin into a soft roll bread formulation from frozen dough had no positive effect on freeze-thaw stability or preventing retrogradation but may provide good nutritional properties.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제22권1호
• /
• pp.183-189
• /
• 2018

This paper proposes distributed file placement and coverage expansion techniques for mitigating the traffic bottleneck in backhaul for small-cell networks. In order to minimize the backhaul load with limited memory space, the proposed scheme controls the coverage and file placement of base station according to file popularity distribution and memory space of base stations. In other words, since the cache hit ratio is low when there is small memory capacity or widespread file popularity distribution, the base stations expand its coverage and cache different set of files for the user located in overlapped area to exploit multiple cached file sets of base stations. Our simulation results show that the proposed scheme outperforms the conventional cache strategy in terms of network throughput when there is small memory capacity or widespread file popularity distribution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제12권2호
• /
• pp.1032-1037
• /
• 2011

In this study, simulation and optimization works for a demethanizer column have been performed to obtain ethane and heavier products from a pretreated natural gas stream. Pretreated natural gas feed stream was partially condensed after being precooled by exchanging heat with demethanizer top vapor stream and by using an external refrigeration cycle with a propane refrigerant. Vapor stream was cooled further and partially condensed through a turbo-expander. The power generated from the expansion of turbo-expander was delivered to the compressor for the residue gas compression. Liquid stream was cooled by Joule-Thomson expansion valve and was fed to the middle section of the demethanizer. Recovery percent of ethane for feed natural was set to 80% and methane to ethane molar ratio was fixed as 0.0119. On the other hand, some of the cold heat could be recovered by splitting the feed stream and by exchanging heat with side reboiler in order to reduce the heat duty in the propane refrigeration cycle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제16권5호
• /
• pp.3602-3609
• /
• 2015

HPFRCC is characterized by a very low water-to-binder ratio which induce extremely large autogenous shrinkage at early age. The restriction of such autogenous shrinkage through the use of forms and reinforcing bars will increase substantially the risk of excessive residual stresses and shrinkage cracking. The exact understanding of the shrinkage behavior and studies on solutions to reduce shrinkage should be imperatively undertaken for further application of HPFRCC to real structures. Therefore, this paper investigated the mechanical properties of HPFRCC with respect to the eventual introduction of expansive admixture(EA) and shrinkage reducing agent (SRA) in the mixture. Autogenous shrinkage test was conducted considering the coefficient of thermal expansion (CTE) measured at early age so as to examine the effects of EA and SRA on the autogenous shrinkage behavior of HPFRCC.

• Journal of agriculture & life science
• /
• 제45권1호
• /
• pp.15-20
• /
• 2011

The objective of this study was to develop allometric equations and stem density and biomass expansion factor for Pinus rigida stands in Muju region. The coefficient of determination of the allometric equations in independent variable (dbh) and dependent variable (biomass) was more than 95% with the exception of leaf (78%) and branch(83%). The total biomass was $102Mg\;ha^{-1}$ ($65.9 Mg\;ha^{-1}$ from stem wood, $9.5Mg\;ha^{-1}$ from stem bark, $19.6Mg\;ha^{-1}$ from branch and $7.0Mg\;ha^{-1}$ from leaf). Biomass distribution ratio of Pinus rigida stands showed the highest in stem wood with 64.6%, followed by the branch with 19.2%, stem bark with 9.3% and the leaf with 6.9%. The results indicated that the stem density $(g/cm^{3})$ and the biomass expansion factor were 0.453 and 1.344, respectively.

• Korean Journal of Optics and Photonics
• /
• 제9권1호
• /
• pp.15-19
• /
• 1998

We have present an all-optical technique to significantly reduce the dispersion penalty of a spectrum-sliced channel in high-speed and long-distance transmissions. We have reduced the necessary optical bandwidth for the 2.5 Gb/s incoherent light transmission down to 0.1 nm by expanding the optical bandwidth of a received signal. The optical bandwidth expansion was realized using the intra-channel fiber four-wave mixing at the receiver resulting in an improvement of th signal-to-noise ratio of the received light channel. We have successfully demonstrated the transmission of a 2.5 Gb/s NRZ signal with the 0.1 nm bandwidth over a 300 km dispersion-shifted fiber. An error floor occurs at $1{\times}10^{-5}$ BER without the optical bandwidth expansion. With the optical bandwidth expansion, however, the error floor decreases to less than $1{\times}10^{-10}$. The transmission penalty was less than 0.5 dB at $1{\times}10^{-10}$ BER. To our knowledge, the optical bandwidth of 0.1 nm used in our experiment is the narrowest optical bandwidth reported so far.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• 제44권4호
• /
• pp.399-405
• /
• 2018

The multi-layered and compartmented hydrogel was designed to examine the self-transforming for developing a 4D mask pack. The hydrogel consisting of two layers with different expansion ratios were fabricated to have specific curvature by self-folding assembly. In addition, the hydrogel compartmented with three different geometries was designed by varying of expansion ratios. The compartmented hydrogel with 0.03, 0. $0,03mm^{-1}$ of curvatures at room temperature was self-transformed with 1.33, 0, $1.33mm^{-1}$of curvatures at $37^{\circ}C$, enhancing the facial adhesion. Overall, this new strategy to prepare the multi-layered and compartmented hydrogel would be actively used in developing the 4D mask pack to self-transform by each facial curvature.

• Asia-Pacific Journal of Business
• /
• 제11권2호
• /
• pp.133-143
• /
• 2020

Purpose - This study seeks to summarize the tax changes in stock trading and analyze K-OTC stock trading data in 2017 and 2018 to infer the effects of the application of capital gains taxes by individual investors. Design/methodology/approach - This study analyzes the case of the expansion of the 2018 capital gains tax exemption in the K-OTC market, which exempts capital gains tax on the proceeds from the sale of individual investors of certain stocks under the temporary special law. Findings - In the K-OTC market, the amount of transactions has expanded since the capital gains tax exemption in 2018, but the volume of transactions and transaction turnover have decreased. In particular, the result of lower transaction turnover after the expansion is contrary to expectations. To control the macroscopic effects of the stock market, further analyses the transactions of capital gains tax-exempt stocks and non-exempt stocks. The turnover rate of exemption stocks is higher than that of the non-exempt stocks. In the case of transaction turnover, the two results are not consistent. However, the latter result is more meaningful because the comparison of exempt and non-exempt reduces distortion by macro effects. Research implications or Originality - To mitigate the impact of capital gains taxes on stock market, government authorities need to consider the gradual expansion of the scope of taxation, the application of separate taxation in the introduction of capital gains, the reduction tax rate on transfer income of listed shares, and the reduction tax rate on long-term holdings.

• Asia-Pacific Journal of Business
• /
• 제11권1호
• /
• pp.145-165
• /
• 2020

Purpose - The purpose of this study is to suggest strategies and solutions for entering China in the tariff and non-tariff sectors of the cosmetic industry. Design/methodology/approach - This study analyzed the import tariff rate of cosmetics in China, and analyzed the export cost by actually interviewing the exporting companies to derive the economic effect of non-tariff measures. Findings - First, We proposed the use of the FTA business model (basic cosmetics), the use of Korea-China FTA tariffs (foam cleansing, toothpaste), and the use of APTA tariffs (perfume). Second, We proposed cooperation between the governments to facilitate customs clearance procedures and improvement of FTA awareness among corporate practitioners. Third, We proposed the expansion and support of the AEO MRA system and the expansion of Korea-China MOU conclusions regarding the certification system, and the international standardization of domestic licensing system and technical conditions. Fourth, We proposed the use of government-supported projects related to obtaining overseas certifications and overseas expansion through collaboration with the same industry. Research implications or Originality - HS3304 products excluded from the Korea-China FTA should take full advantage of the FTA business model. In addition, the non-tariff measure costs are fixed costs per year, so the ratio decreases as the number of exports and export volume increases.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제26권1호
• /
• pp.58-66
• /
• 2022

In this study, to examine the effect of the transverse thermal expansion behavior of FRP reinforcing bars and concrete on the concrete cover thickness, based on 20℃, when the temperature changes from -70℃ to 80℃, the behavior of concrete was studied theoretically and numerically. Theoretical elastic analysis and nonlinear finite element analysis were performed on FRP reinforced concrete with different diameters and cover thicknesses of FRP reinforcement. As a result, at a negative temperature difference, concrete was compressed, and the theoretical strain result and the finite element result were similar, but at a positive temperature difference, tensile stress and further cracks occurred in the concrete, which was 1.2 to 1.4 times larger than the theoretical result. The ratio of the diameter of the FRP reinforcing bar to the thickness of the concrete cover (c/db) is closely related to the occurrence of cracks. Since the transverse thermal expansion coefficient of FRP reinforcing bars is three times greater than that of concrete, it is necessary to consider this in design.