• 한국자동차공학회논문집
• /
• 제19권2호
• /
• pp.125-132
• /
• 2011

The rupture of an expansion tube is mainly affected by the expansion ratio and the external shape of the punch used to expand the tube. In order to prevent the tube from rupture, the effect of the external shape of the punch should be considered in the design. The aim of this paper is to confirm the effect of key design parameters of the punch on rupture of the tube using a finite element analysis with a ductile damage model. The results of the analysis indicated that the expansion ratio of the tube was mainly affected by variation of the radius of the punch. However, the rupture was more affected by variation of the punch angle than the radius of the punch. The existence of a specific punch angle at which rupture did not occur, even if the radius of the punch was increased, was found from the results.

• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.138-142
• /
• 2018

본 연구에서는 플랜트 기자재 중 수충격에 매우 취약한 신축관 이음을 대상으로 수충격 발생 시 신축관 이음의 신축량의 변화를 현장에서 취득한 후 HIL 시뮬레이터의 작동데이터로 적용한 HILS 기법을 적용한 진동내구 시험을 수행하였다. 또한 진동내구 시험 시 내구수명의 주요 스트레스 인자로 신축관 내부압력을 가정하였다. 진동내구 시험은 신축관 내부 설정압 따라 진행되었으며 수명데이터를 이용, 수명데이터를 잘 따르는 곡선을 접합하여 수명예측 모델식을 유도하였고 특정 내부 설정압에서의 시험 및 수명결과를 통하여 이를 검증하였다. 한편, 시험 중 발생 된 신축관의 고장모드는 모두 벨로우즈 부 표면에 발생된 크랙과 크랙을 통한 누수 등이 있었다. 본 연구에서 유도한 수명에측 모델식은 설정압력을 스트레스 인자로 따르는 전형적인 역승모형이며 특정환경에서만 적용될 수 있는 한계를 지니고 있다. 이에 본 연구는 진동내구 수명의 가속요인인 압력 외 온도상태 등을 다양한 수명변수가 적용 가능한 복합수명예측 모델식을 개발할 예정이다.

• 구강회복응용과학지
• /
• 제23권4호
• /
• pp.313-326
• /
• 2007

With rising prevalency of mouth breathing children caused by developing civilization and increasing pollution, there are many maxillary transverse discrepancy patients with undergrowth of maxilla. For improving this, maxillary mid-palatal suture splitting was often performed. The purpose of this study was to analyse the stress distribution on the craniofacial suture and cranium after rapid maxillary expansion by finite element model. The boy(13Y6M) was chosen for taking computed-tomography for finite element model. Three-dimensional model of maxilla, first premolar, first molar, buccal and lingual part of rapid maxillary expansion were constructed. 1. The alveolar bone adjacent to the first molar and the first premolar that was affected directly by rapid maxillary expansion was displaced laterally approximately 4.04mm at maximum. The force decreased toward anterior region and frontal alveolar bone displaced laterally about 3.18mm. 2. A forward maximum displacement was exhibited at zygomatic process middle region. 3. At maximum, maxillary median part experienced 0.973mm downward repositioning and 0.65mm upward repositioning at lateral alveolar bone. 4. Von mises stress was observed the largest stress distribution around teeth and zygomatic buttress. 5. The largest tensile force was observed around alveolar bone of teeth, while compression force was observed at zygomatic buttress.

• 한국경영과학회지
• /
• 제17권1호
• /
• pp.117-117
• /
• 1992

Pubilc utility industries including the electric utility industry are facing a new stream of privatization com-petition with the private sector and deregulation. The necewssity to solve now and in the future power supply and demand problems has been increasing through the sophisticated generation expansion plan(GEP) approach con-sidering not only KEPCo's supply-side resources but also outside resources such as non-utility generation(NUG) demand-side management (DSM). Under the environmental situation in the current electric utility industry a new approach is needed to acquire multiple resources competitively. This study presents the development of a modified electric generation expansion analysis system(EGEAS) model with avoided cost based on the existing EGEAS model which is a dynamic program to develope an optimal generation expansion plan for the electric utility. We are trying to find optimal GEP in Korea's case using our modified model and observe the difference for the level of reliabilities such as the reserve margin(RM) loss of load probability(LOLP) and expected unserved energy percent(EUEP) between the existing EGEAS model and our model. In addition we are trying to calculate avoided cost for NUG resources which is a criterion to evaluate herem and test possibility of connection calculation of avoided cost with GEP implementation using our modified model. The results of our case study are as follows. First we were able to find that the generation expansion plan and reliability measures were largely influenced by capacity size and loading status of NUG resources, Second we were able to find that avoided cost which are criteria to evaluate NUG resources could be calculated by using our modified EGEAS model with avoided cost. We also note that avoided costs were calculated by our model in connection with generation expansion plans.

• 소성∙가공
• /
• 제16권7호
• /
• pp.521-529
• /
• 2007

This paper is concerned with the analysis on the surface expansion of AA 2024 and AA 1100 aluminum alloys in backward extrusion process. Due to heavy surface expansion appeared usually in the backward can extrusion process, the tribological conditions along the interface between the material and the punch land are very severe. In the present study, the surface expansion is analyzed especially under various process conditions. The main goal of this study is to investigate the influence of degree of reduction in height, geometries of punch nose, friction and hardening characteristics of different aluminum alloys on the material flow and thus on the surface expansion on the working material. Two different materials are selected for investigation as model materials and they are AA 2024 and AA 1100 aluminum alloys. The geometrical parameters employed in analysis include punch corner radius and punch nose angle. The geometry of punch follows basically the recommendation of ICFG and some variations of punch geometry are adopted to obtain quantitative information on the effect of geometrical parameters on material flow. Extensive simulation has been conducted by applying the rigid-plastic finite element method to the backward can extrusion process under different geometrical, material, and interface conditions. The simulation results are summarized in terms of surface expansion at different reduction in height, deformation patterns including pressure distributions along the interface between workpiece and punch, comparison of surface expansion between two model materials, geometrical and interfacial parametric effects on surface expansion, and load-stroke relationships.

• 한국해안·해양공학회논문집
• /
• 제20권2호
• /
• pp.184-193
• /
• 2008

아산호 상류지역의 도시화 진행과 이상 기후 등에 따른 강수량 증가로 아산만 방조제 배수갑문 확장의 필요성이 제기됨에 따라 배수갑문 확장으로 인한 방류량 증가가 아산만 및 주변 해역에 미치는 영향을 수리모형실험과 범용 수치모의 코드인 Delft3D, FLOW-3D를 이용하여 검토하였다. 그 결과 아산만 방조제 배수갑문확장에 의한 영향은 미흡한 것으로 확인되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.393-395
• /
• 2006

In competitive market, it is important to establish a plan of transmission expansion considering uncertainty of future generation and load behavior. For this reason, revised transmission expansion model is proposed in this paper. In the proposed model, information of predictable future condition are included in a cost function of transmission expansion investment. Also, to reduce risk of the investment, mean-variance Markowitz approach is added to the objective function of cost. By optimization programming, the most robust and the minimum cost plan can be obtained.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.335-340
• /
• 2000

A 3 valve-type pulse tube refrigerator optains its cooling effect from pressure drop by releasing the part of the charged gas through hot end nozzle. The objective of this study is to analyze the performance and to find an optimal expansion pressure of the 3 valve-type pulse tube refrigerator. It is assumed that gas lumps are not mixed and periodically repeat the adiabatic compression and expansion processes. And the nodal model is applied for the analysis of the regenerator. As the result of analysis, the optimum pressure at the end of expansion process was about 80-90% of the maximum pressure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.544-549
• /
• 2011

Simplified formulae for axial and bending natural frequencies of bellows are developed using an equivalent thin-walled pipe model. The axial and bending stiffness of bellows is determined using lumped transfer matrix method. Accordingly, the Expansion Joint Manufacturers Association (EJMA) formula for axial and bending stiffness calculation is modified using two different equivalent radii. The results from the simplified formulae are verified by those from a experiment result and a finite element (FE) model and good agreement is shown between the each other.

• ETRI Journal
• /
• 제29권1호
• /
• pp.89-94
• /
• 2007

A mathematical model for the input-output characteristic of an amplifier exhibiting gain expansion and weak and strong nonlinearities is presented. The model, basically a Fourier-series function, can yield closed-form series expressions for the amplitudes of the output components resulting from multisinusoidal input signals to the amplifier. The special case of an equal-amplitude two-tone input signal is considered in detail. The results show that unless the input signal can drive the amplifier into its nonlinear region, no gain expansion or minimum intermodulation performance can be achieved. For sufficiently large input amplitudes that can drive the amplifier into its nonlinear region, gain expansion and minimum intermodulation performance can be achieved. The input amplitudes at which these phenomena are observed are strongly dependent on the amplifier characteristics.