• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.88-95
• /
• 2000

In this paper, an expansion-resonator type pulsation attenuator is proposed to absorb and attenuate flow an pressure ripple with high frequencies generated from hydraulic control systems. The basic principle of a pulsation attenuator proposed here is applied to propagation, reflection, absorption of pressure waves at the cross section of discontinuity and resonance in the pipeline. It has advantage of the compact size and high degree fo freedom for installation in hydraulic systems. The design scheme based on distributed parameter pipeline system with dissipative viscous compressible model is developed. To investigate the reduction of flow and pressure ripple with high frequencies produced by swash plate type axial piston pump, two kinds of attenuators are manufactured. It is experimently confirmed that the spectral intensity of flow and pressure ripple with high frequencies from the pump are reduced up to about 20$^{\circ}$~30dB by using attenuators proposed here. The calculated results were in good agreement with the measured values. From there sults of this study, it is shown that an expansion-resonator type pulsation attenuator is effective in a wide frequency ranges to attenuate the flow and pressure ripple from hydraulic components.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.3
• /
• pp.384-393
• /
• 2002

The effects of hole expansion angle and the arrangement of nozzles on a film cooling system for a turbine-blade-shaped surface were experimentally investigated. Liquid crystal with flue-temperature correlation and an image processing system were employed to evaluate surface temperature. Distributions of cooling effectiveness were then presented to figure out the change of heat transfer characteristics with different geometric conditions of cooling-holes. It was found thats the averaged cooling efficiency on the suction surface was maximum with 10 degree of the cooling hole expansion angle. It was also shown that the averaged cooling efficiency on the pressure surface and the averaged cooling efficiency for dual array case were not affected by the hole expansion angle.

• Korean Journal of Metals and Materials
• /
• v.50 no.9
• /
• pp.629-636
• /
• 2012

Volume shrinkage behavior accompanying the cure of resin formulations might be a critical factor when assembly processes using polymer materials are considered. In this study, cure shrinkage behavior with respect to resin formulation type and heating method was measured on sandwich structure samples by a thermomechanical analyzer (TMA). Quartz, used as a cover material for the sandwich structure, indicated the coefficient of thermal expansion close to $0ppm/^{\circ}C$. When a dynamic heating mode was conducted, a squeeze-out region and a cross-linking region for each resin formulation could be separated clearly with overlapping differential scanning calorimeter results on the TMA results. In addition, a cure shrinkage dominant region and a thermal expansion dominant region in the cross-linking region were distinguished. Consequently, the degree of cure at the initiation of the thermal expansion dominant region was successfully measured. Measurement of all resin formulations indicated the thermal expansion behavior exceeded cure shrinkage before full cure.

• Korean Institute of Interior Design Journal
• /
• no.38
• /
• pp.65-74
• /
• 2003

The purpose of this study Is to find out the design guideline for women's hospital focusing on the patient needs. The results of research are as follows: 1) As a basic frame of evaluation model, the quality of service of medical facilities and patients' reaction to the physical environment are fixed as a variable called' satisfaction degree'. This study analyzes the influence on space efficiency evaluation according to the difference of types through basic model (Model I-1,2) as verification model to identify the difference between satisfaction degree of outpatients and that of inpatients. 2) The difference of satisfaction degree about the hospital facilities by space evaluation matrix is according to the types of inpatients and to space importance. 3) The control of importance degree about the interior facilities of the hospital according to the specific character of the hospital is necessary. Maintenance of the status quo, or reduction, or expansion is needed according to the satisfaction degree corresponding to the importance degree. Finally, the model is used to for the planning & design for the future women's hospital.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.3
• /
• pp.135-145
• /
• 2014

This study aims to draw the implication in improving middle school students' school adjustment and suggest policy methods for their school adjustment depending on the degree of social support. As a result of the research, it was found that middle school students' resilience factors such as self-control ability and interpersonal relationship ability had the influence on their impulse control, self-esteem, communication and self-expansion ability on their social competence. Emotional regulation, impulse control, self-esteem, communication and self-expansion ability had the influence on school adjustment. It was also known that middle school students' social competence had high influence on their school adjustment and their self-expansion ability had the highest influence on social competence. Middle school students' resilience factors such as emotional regulation, empathy and self-expansion ability may be different in their influence on social competence. Impulse control may be different depending on their school adjustment and a degree of social support, and social competence may be different depending on their school adjustment and a degree of social support.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.2179-2183
• /
• 2009

As urbanization is progressed, the network for distributing water in a basin become complex due to the spatial expansion and parameter uncertainties of water supply systems. When a long range water supply plan is determined, the total construction and operation cost has to be evaluated with the system components and parameter uncertainties as many as possible. In this paper, the robust optimization approach of Bertsimas and Sim is applied in a hypothetical system to find a solution which remains feasible under the possible parameter uncertainties having the correlation effect between the uncertain coefficients. The system components to supply, treatment, and transport water are included in the developed water supply system and construction and expansion of the system is allowed for a long-range period. In this approach, the tradeoff between system robustness and total cost of the system is evaluated in terms of the degree of conservatism which can be converted to the probability of constraint violation. As a result, the degree of conservatism increases, the total cost is increased due to the installation of large capacity of treatment and transportation systems. The applied robust optimization technique can be used to determine a long-range water supply plan with the consideration of system failure.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.3
• /
• pp.197-203
• /
• 2022

Urban space expansion is an important symbol of the urbanization process and has always been an important topic in urban studies. In addition, for sustainable city management, it is important to identify factors that can influence, such as the driving force and direction of urban space expansion, from the stage of establishing an urban development plan. To understand these factors, by observing the expansion process of a specific city, it is possible to sufficiently observe how the urban spatial dimension changes. Through a series of processes, the spatial growth characteristics of the city are analyzed, and the influence and results of important factors are analyzed. For this purpose, this paper examines the changes in the city's outer boundary and land use structure through monitoring data on urban areas of 14 cities in Hunan Province, China from 2000 to 2016. Temporal and spatial regularity according to the urban space expansion of these cities were analyzed, and a preliminary assessment was made on whether the urban space expansion is coordinated with the urban population growth. The assessment result showed: (1) The urban space of most cities has been extended rapidly in 2000-2015 however, the rate and the intensity of urban space expanding has been declining. (2) The construction of the industrial park is the core driving force of the urban space expanding, and the change of the urban space structure is manifested as enclave city expansion because that the industrial park is usually far away from the city center. (3) The population agglomeration is another driving force of the urban space expanding. At this time, the urban space expanding is like boundary extension. (4) Except Changsha city, all of the cities has a high urbanization-area-growth elastic coefficient. It means that most of the cities should enhance the land use degree.

• Journal of Practical Engineering Education
• /
• v.14 no.1
• /
• pp.179-194
• /
• 2022

After the work-study combination PBL method was first introduced into the P-Tech type in 2018, it was introduced into the degree-linked high-skilled professional course in operation as a pilot project in 2020, and ever since each department has reorganized the standard completion system to meet the PBL operation regulations and developed and operated PBL-based learning and training courses accordingly. With the expansion of the work-study combination PBL in 2021, the operating regulations were revised more elaborately. This paper examined the characteristics of the work-study combination PBL, the PBL operation regulations for each degree-linked high-skilled professional course, and the most recently implemented PBL operation regulations in detail through literature research. Based on this research, it introduced the development process and the result of the PBL-based standard completion system by the IT Convergence SW Engineering Department of KOREATECH and the result of the survey conducted to verify the suitability of the standard completion system after an operation and presented the challenges and improvements required for the degree-linked high-skilled professional course in relation to the changing operation regulations for the work-study combination PBL. This study is expected to provide universities with a reference to the development of training courses to smoothly apply the work-study combination PBL. It is also expected to contribute to the establishment and steady expansion of a unique PBL system that reflects the characteristics of work-study combination by presenting discourses on how the work-study combination PBL should develop, including high-skilled professional courses.

• Korean journal of food and cookery science
• /
• v.9 no.4
• /
• pp.278-283
• /
• 1993

This study was attempted to investigate the effects of enzymatic modification of milk protein with protease on functional properties. The selected functional properties were solubility, emulsifying activity (EA), emulsion stability(ES), foam expansion(FE), and foam stability(FS). These properties were measu-red from pH 3.0 to pH 8.0. The proteases used in this study were iaolated from Meju(fermemted soybean) and had specific activity of 250 units/㎎ protein at pH 7.0, 1600 units of pretense was used for 1gr. of skim milk protein. Skim milk showed 30.5％ degree of hydrolysis for 1 hr. and 36.4% degree of hydrolysis for 3.5 hrs. of protease treatment at pH 7.0. Solubility of native skim milk, control, 1 hr. and 3.5 hrs. groups were 3.37, 3.64, 10.21, 14.34％o at pH 4.0 respcetively. The emulsifying activity of native skim milk, control, 1 hr. and 3.5 hrs. groups were 38.8,42.0,43.0,46.7ft at pH 4.0, respectively. Enzymatic modification resulted in the increase of solubility and emulsifying activity at pH 4.0. However at pH 5.0 emulsifying activity of 1 hr. and 3.5 hr. group were lower than native skim milk and control groups. 1 hr. protease treatment was found to be most effective way of increasing foam expansion at pH 4.0 to 6.0. It was supported that, protease treated skim milk can be used to improve solubility, emulsifying activity, foam expansion at acid pH. meju protease. skim milk, solubility, emulsion, foam.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.8
• /
• pp.361-371
• /
• 2008

In this paper, the hypercube, hyperpetersen networks, whose degree is increasing in accordance with expansion of number of node and complete binary tree are one-to-one embedded into peterson-torus(PT) network which has fixed degree. The one-to-one embedding has less risk of overload or idle for the processor comparative to one-to-many and many-to-one embedding. For the algorithms which were developed on hypercube or hyperpetersen are used for PT network, it is one-to one embedded at expansion ${\doteqdot}1$, dilation 1.5n+2 and link congestion O(n) not to generate large numbers of idle processor. The complete binary tree is embedded into PT network with link congestion =1, expansion ${\doteqdot}5$ and dilation O(n) to avoid the bottleneck at the wormhole routing system which is not affected by the path length.