• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.442-447
• /
• 1994

Effect of different mixing ratio of non-glutinous and glutinous rice on physical and rheological properties of extrudate prepared in a single screw extruder were examined. The extrusion conditions in term of screw speeds, moisture content and die temperature were 258 rpm, 18% and $120^{\circ}C$, respectively. The resisdence time distribution of the most of materials were within 30 second and small portion of them went up to 80 second. The expansion ratio was the highest value (2.93) for 70% of glutinous rice in the mixture, while the lowest value for 100% of non-glutinous rice. Breaking strength was in the range between 1,051g and 1,117g for $10{\sim}20%$ of glutinous rice in the mixture, while the lowest value (737g) for 80%r of glutinous rice. As the amount of glutinous rice increased, L and a values were increased and b value was decreased. The uncooked cold paste viscosity had 400 B.U. for 100% non-glutinous rice , while no peak for the 100% glutinous rice. As the amount of glutinous rice increased up to 100%, the water absorption index (WAI) was decreased, while water solubility index (WSI) was increased. The rheological properties of extrudate were accounted by the law of Oswald. The flow behavior index of extrudate was less than 1.0, which showed pseudoplastic behavior. Yield stress was the highest value for 20% of glutinous rice in the mixture and the lowest value for $80{\sim}100%$ of glutinous; rice. Number of air cell was between 128 and 159 for $80{\sim}100%$ of glutinous rice in the mixture, while $81{\sim}84%$ for $0{\sim}20%$ of glutinous rice. The degree of shapefact was increased more when the mixtures of glutinous and non-glutinous rice was used than when glutinous or non-glutinous rice was only used.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.132-158
• /
• 2023

The five-story and seven-story stone pagodas at Cheongnyangsaji temple site in Gongju are located under the Sambulbong peak of Gyeryongsan mountain, and are known to have been built of the middle in Goryeo dynasty. As the two pagodas in which two types of Baekje stone pagoda coexist in one era, their historical and academic value are recognized. The seven-story pagoda was overturned by robbery in 1944, and as a result, the five-story pagoda was tilted. Although the two pagodas were restored in 1961, structural instability was continuously raised. In this study, measurement data accumulated from May 2021 to March 2022, and seasonal characteristics were reviewed, and the micro behavior of pagodas were analyzed according to temperature and precipitation during the same period. As a result, the micro thermoelastic behavior was repeated according to the daily temperature change in all sensors, and both the slope and the displacement showed microscale behavior. In the inclinometer, moisture containing the surface and inside of the stones repeated expansion and contraction due to temperature change, showing the micro movements. In particular, the upper part of the five-story pagoda moved up to 3.89° to the northwest, and the seven-story pagoda tilted up to 0.078° to the northeast. The maximum displacements were recorded as 0.127 and 0.149 mm in the five-story and the seven-story pagoda, respectively. These values tended to return to the original position at the end of the measurement, but did not recover completely, indicating a state requiring precise monitoring. The result obtained through the study can be used as basic data for the stable conservation of the two stone pagodas. Based on the behavioral characteristics considering various environmental factors should be analyzed, and the preventive conservation through the maintenance of measurement system built this time should be continued.

• Journal of Internet Computing and Services
• /
• v.14 no.5
• /
• pp.101-117
• /
• 2013

As the number of online game user has been rapidly increased thanks to the recent vitalization of online contents market, not only new business opportunity but also the opportunity to create high profits have been provided as well. However, the increase of the number of online game user and the rapid expansion of the market evoke a cutthroat completion among online game service providers, and also high barriers to entry to online game market have been erected. Thus, what kinds of efforts need for the business success and sales increase in online game market? In lots of researches regarding online contents business, the deepening of loyalty was considered as a critical factor for the business success. According to the study on user's behavior in online environment, users would experience the Flow while using online service, and then, if they were in state of the Flow, they would use the service constantly. High customer loyalty to online game means high will to use the online game too. The purpose of this research was i) to examine what factors enable users to be naturally immersed in online game while playing it, ii) to examine what properties of online game can make game more interesting and exciting, iii) to verify that such factors are critical in deepening customer loyalty, and iv) to suggest some essential factors to be fun and exciting games, on where the focus should be put, and the directionality for the development for sales expansion of online game developer or online game service provider. The research results are as below: First, the involvement and the perceived quality which were characteristics of brand appeared to be factors most affecting Flow. This shows that once game user get interested in online game that user has played frequently, even though new games are released, user will continuously flow the game not moving to new games, and also shows that users not only get more interested but also put more trust in games in the site to where users are frequently going than games in other sites, and consequently user can increasingly flow the game. Second, the compensation and graphics which are the characteristics of contents appeared to be factors affecting Flow. Proper compensation which is given to game users triggers fun and interests in game and makes them flow more and more. And graphics make users to feel game space as if real space and let them flow in game with more reality. Third, challenges, support, and the stability which are technical characteristics appeared to be factors affecting Flow. Challenges enable users to not only experience new virtual world but also solve various difficulties and obstacles. Once users feel fun and interests through this challenge, they can naturally flow games. In addition, the stability of network provides reliability in security and hacking. By doing so, it can induce users to flow more and more. Lastly, when aforementioned characteristics including contents characteristics, technical characteristics, and brand characteristics are organically combined each other, game users feel fun and total minutes are naturally increased, so that game users experience Flow, and consequently the customer loyalty will be deepened as well.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.4
• /
• pp.101-114
• /
• 2008

Pressurized grouting is a common technique in geotechnical engineering applications to increase the stiffness and strength of the ground mass and to fill boreholes or void space in a tunnel lining and so on. Recently, the pressurized grouting has been applied to a soil-nailing system which is widely used to improve slope stability. Because interaction between pressurized grouting paste and adjacent ground mass is complicated and difficult to analyze, the soil-nailing design has been empirically performed in most geotechnical applications. The purpose of this study is to analyze the ground behavior induced by pressurized grouting paste with the aid of laboratory model tests. The laboratory tests are carried out for four kinds of granitic residual soils. When injecting pressure is applied to grout, the pressure measured in the adjacent ground initially increases for a while, which behaves in the way of the membrane model. With the lapse of time, the pressure in the adjacent ground decreases down to a value of residual stress because a portion of water in the grouting paste seeps into the adjacent ground. The seepage can be indicated by the fact that the ratio of water/cement in the grouting paste has decreased from a initial value of 50% to around 30% during the test. The reduction of the W/C ratio should cause to harden the grouting paste and increase the stiffness of it, which restricts the rebound of out-moved ground into the original position, and thus increase the in-situ stress by approximately 20% of the injecting pressures. The measured radial deformation of the ground under pressure is in good agreement with the expansion of a cylindrical cavity estimated by the cavity expansion theory. In-situ test revealed that the pullout resistance of a soil nailing with pressurized grouting is about 36% larger than that with regular grouting, caused by grout radius increase, residual stress effect, and/or roughness increase.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.1
• /
• pp.285-301
• /
• 2020

Looking at the problem of aging in the nation from a demographic perspective, it is not a problem of the overall population, but of the structure of the population. It is the baby boomer and post-baby boomers, the largest population in the country. Baby boomers were born between 1955 and 1963, and currently have a population of 7001,333, which is 13.6 percent (as of 2015). The Post-Baby Boomer generation was born between 1964 and 1974, with a total population of 9,567,171, accounting for 18.8 percent of the total population. In particular, baby boomers and post-baby boomers (32.4% of the total population) have begun to retire or will retire soon. The average life expectancy continues to increase due to the development of medical technology, and the falling birth rate of newborns and the declining population of the production population are darkening the domestic economy. In a policy proposal aimed at easing the nation's falling economic growth rate, women's participation rate is as high as Sweden and men's efforts to increase it as high as Japan's, while the elderly rate is desirable to maintain Korea's high level. This is because the expansion of the elderly generation's participation in economic activities could ease a sharp drop in economic growth and reduce the burden of supporting the elderly population. The study, based on this social problem awareness and problem solving plan, looks at the relationship between career orientation and satisfaction in start-up education based on the diverse career base of active seniors, and also suggests the importance of customized start-up education on the diversity of active seniors by clarifying the relationship between them, and suggests the desirable direction of senior start-up policy design, funding, and start-up education. Based on the theoretical background, the concept of five factors was defined: active senior, career-oriented, satisfaction level of start-up education, willingness to start a business, and the concept definition of an active senior, which is particularly key to the baby boomers in their 50s and 60s, is generally regarded as a source of consumption or welfare benefits, but in this study, the concept of active start-up is reflected in the domestic start-up market by young people in their 40s, 50s and 60s. As a result of a hypothesis test. Hypothesis 1 and Hypothesis 5: Career orientation has been verified to affect the willingness to start a business and the behavior of preparation for a start-up. Hypothesis 3: The willingness to start a business has been verified as having an effect between startup preparation actions. Hypothesis 4: The satisfaction level of start-up education has been verified to affect start-up preparation behavior. However, hypothesis 2: The satisfaction level of education for start-ups does not affect the willingness to start a business. Such results can be inferred that satisfaction in start-up education does not have a direct effect on the will to start a business and increases the will to start a business through the influence of personal career orientation.

• Clinical and Experimental Pediatrics
• /
• v.48 no.4
• /
• pp.425-432
• /
• 2005

Purpose : Polyglutamine diseases are a group of diseases caused by the expansion of a polyglutamine tract in the protein. The present study was performed to verify if polyglutamine disease transgenic Drosophila models show similar dysfunctions as are seen in human patients. Methods : Polyglutamine disease transgenic Drosophila were tested for their climbing ability. And using genetic methods, the effects of anti-apoptotic gene bcl-2 and chemical chaperones on neurodegeneration were observed. Also, spinocerebellar ataxia 2 (SCA2) transgenic Drosophila lines were generated for future studies. Results : Expanded forms of spinocerebellar ataxia 3 (SCA3) transgenic protein causes characteristic locomotor dysfunction when expressed in the nervous system of Drosophila but the anti-apoptotic gene bcl-2 shows no evidence of ameliorating the deleterious effect of the expanded protein. However, Glycerol, a chemical chaperone, seemed to reduce the toxicity, at least in the eyes of the transgenic flies. The level SCA2 expression is too weak in the transgenic SCA2 Drosophila for evaluation. Conclusion : SCA3 transgenic Drosophila show ataxic behavior as observed in human patients. Chemical chaperones such as glycerol may prove beneficial in this class of genetic disease, which has no current method of cure.

• Journal of the Korea Concrete Institute
• /
• v.24 no.4
• /
• pp.453-463
• /
• 2012

Steel-concrete composite rigid-frame bridge is a type of integral bridge having advantages in bridge maintenance and structural efficiency from eliminating expansion joints and bridge supports, the main problems in bridge maintenance. The typical steel-concrete composite rigid-frame bridge has the girder-abutment connection where a part of its steel girder is embedded in abutment for integrity. However, the detail of typical girder-abutment connection is complex and increases the construction cost, especially when a part of steel girder is embedded. Recently, a new type of bridge was proposed to compensate for the disadvantages of complex details and cost increase. The compensation are expected to improve efficiency of construction by simplifying the construction detail of the girder-abutment connection. In this study, a static load test has been carried out to examine the behavior of the girder-abutment connection using real-scale specimens. The results of the test showed that the girder-abutment connection of proposed girder bridge has sufficient flexural capacity and rebars to control concrete crack should be placed on the top of abutment.

• Environmental and Resource Economics Review
• /
• v.12 no.4
• /
• pp.637-661
• /
• 2003

This paper analyzes the impact of import liberalization of petroleum product market in 1997 on the behavior of a domestic industry, regarded as a typical oligopoly. Based on the theory of implicit cartel, two regression equations were formulated and estimated for domestic production and refinery margin using monthly data for the period from Jan. 1994 to June 2003. Estimation results show that not only did domestic production rise sharply but also the refining cost fell substantially throughout 1996 before the actual liberalization of imports, Such a response is clearly consistent with the implicit cartel theory, which suggests that once the difficulty of maintaining a cartel in the future is recognized, the cartel immediately collapses and anticipation of import liberalization can cause immediately lowering market price as well as an immediate expansion of the supply by a domestic industry. However, the significant reduction of refinery cost accompanied by a large contraction in domestic output after the actual implementation of import liberalization can be explained by the collapse of implicit cartel caused by the anticipated liberalization of imports. Thus, import liberalization in the sense of allowing entry of foreign producers into domestic market has seemed to be an effective means to weaken market power and induce more competitive conduct of domestic firms.

• Korean journal of applied entomology
• /
• v.48 no.3
• /
• pp.369-375
• /
• 2009

A commercial egg parasitoid, Trichogramma sp. Nabis101, was released into agricultural cultivating areas in Korea due to its wide host spectrum against insect pests. Moreover, an application technique has been recently developed to enhance its control efficacy by mixture treatment with a microbial control agent. Despite its expansion of commercial availability, any genetic identification on this commercial strain was not determined. Also, to meet inconsistent demands from consumers, the live parasitoids need to be stored without significant loss of their survival and parasitic activity. This study determined nucleotide sequence of internal transcribed spacer (ITS) of the wasp species. The identified ITS sequences indicate that this wasp species is most similar to T brasiliensis. Optimal storage condition of this wasp required young parasitized stage at $10^{\circ}C$. Under these conditions, survival, sex ratio, longevity, and parasitic behavior were not much impaired for 5 weeks.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.1
• /
• pp.17-22
• /
• 2016

Flexible organic light-emitting diode (OLED) devices consist of multi-stacked thin films or layers comprising organic and inorganic materials. Due to thermal coefficient mismatch of the multi-layer films, warpage of the flexible OLED is generated during high temperature process of each layer. This warpage will create the critical issues for next production process, consequently lowering the production yield and reliability of the flexible OLED. In this study, we investigate the warpage behavior of the flexible OLED for each bonding process step of the multi-layer films using the experimental and numerical analysis. It is found that the polarizer film and barrier film show significant impact on warpage of flexible OLED, while the impact of the OCA film on warpage is negligible. The material that has the most dominant impact on the warpage is a plastic cover. In order to minimize the warpage of the flexible OLED, we estimate the optimal material properties of the plastic cover using design of experiment. It is found that the warpage of the flexible OLED is reduced to less than 1 mm using a cover plastic of optimized properties which are the elastic modulus of 4.2 GPa and thermal expansion coefficient of $20ppm/^{\circ}C$.