• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.47-54
• /
• 2020

This study proposes an NFC-based payment system that considers user convenience while expanding the existing payment method for RFID-based individual food and logistics waste equipment. In line with this trend, I proposed to apply NFC to the existing RFID-based food meter to release the food in the meantime and to address the problem of re-carrying due to card loss, card not possessed, and non-filling, and the question that could not be identified by various cumbersome procedures. NFC's function alone has been certified for its convenience, which led to its introduction and research in the period of time. Of course, we need to negotiate fees with the transportation card company, but if we see a market share related to transportation card soon, we think smooth negotiations will take place. NFC method will be expanded to all phones with iPhone NFC opening. Therefore, in the next study, we intend to apply the payment system in NFC by linking with local currency, mobile vouchers, and card companies, which are being paid as respective payment means according to the recent emergency support system for COVID-19.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.92-100
• /
• 2008

The existing transportation systems is emerged as a major obstacle to solve the problems such as a traffic jam and the increasing cost for a distribution and a traffic safety. In hun, ITS targeting intellectual vehicles and transportation infrastructure like road and signals is getting more important and the standards of ITS wireless communication is also getting attention. New traffic control strategies are being developed to utilize real-time traffic information collected by detection method using ITS wireless technology. Especially, DSRC system is being expanded wit ETCS and the use of OBU is spreading. These infrastructures will have much influence on ITS industry and a profound study on the method of utilizing a present infrastructure is going on in various fields. The optimum traffic signal control system using quality real-time information through these infrastructure is under development and so is WISDOM. Accordingly, this paper proposes communication protocol utilizing DSRC to collect real-time traffic information in WISDOM.

• Journal of the Korea Concrete Institute
• /
• v.20 no.4
• /
• pp.431-437
• /
• 2008

The concrete pavement at Seohae Expressway in Korea has suffered from serious distress, only after four to seven years of construction. The deterioration of ASR has seldom been reported per se in Korea, because the aggregate used for the cement concrete has been considered safe against alkali-silica reaction so far. The purpose of this study is to examine the expansion behavior of aggregates of Korea due to alkali-silica reaction by ASTM C 1260 standard method of the accelerated mortar bar test (AMBT), stereo microscopic analysis, scanning electronic microscope (SEM) analysis, and electron dispersive X-ray spectrometer (EDX) analysis. The results are presented as it follows. The accelerated mortar bar test (AMBT) showed that mica granite and felsite of igneous rocks, aroke, red sandstone and shale of sedimentary rocks, slate of metamorphic rock, and dendrite and quartz of mineral rock showed more expansion than 0.1% at 14 days. But, some sedimentary rocks and metamorphic rocks expanded more than 0.1% at 28 days even though they were less than 0.1% at 14 days. The mortar bars, which showed more than occurred 0.1% expansion, resulted in cracking on surface. SEM and EDX analysis confirmed that the white gel was a typical reaction product of ASR. The ASR gel in Korea mainly consisted of Silicate (Si) and Potassium (K) from the cement. The crack in the concrete pavement was caused by ASR. It seems that Korea is no longer safe zone against alkali-silica reaction.

• Journal of the Korean Geographical Society
• /
• v.51 no.5
• /
• pp.713-737
• /
• 2016

This study is to review research issues on North Korea and unified territory in terms of topics and approach method in Korean human geography. The conclusion of this paper is as follows. Before 1980's, topics on political geography, such as geopolitics or unified land, were the main stream in research. In 1990's with the end of the cold war and the access to material which was published in North Korea, scope of research was widened especially in geography education. After 2000's with the expansion of cooperation between South and North Korea, the scope of topics were more expanded in all field of human geography, for example, critical geopolitic in political geography, Gaeseong Industrial Complex, Najin-Seonbong region in economic geography, place names, Geumgangsan, North Korean defectors in social and cultural geography. The approach method of toward North Korea is fall into two categories. One is regional geography and the other is the unified land. In the latter approach, topics on the regional structure after reunification or on the life adaptation of defectors in South Korea etc. were studied. After unification of land, new Korean Studiea will be established and human geographers should make ready for this. Before unification, research on the land in north Korea should be proceeded in terms of historical geography.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.249-263
• /
• 2017

The expansion behavior of inflatable steel pipe rockbolt shows geometric nonlinearity due to its ${\Omega}-shaped$ section. Previous studies on the anchoring behavior of inflatable steel pipe rockbolt were mainly performed using theoretical method. However, those studies oversimplified the actual behavior by assuming isotropic expansion of inflatable steel pipe rockbolt. In this study, the anchoring behavior of the inflatable steel pipe rockbolt were investigated by the numerical method considering the irregularity of pipe expansion and other influencing factors. The expansion of inflatable steel pipe rockbolt, the contact stress distribution and the change of the average contact stress and the contact area during installation were analyzed. The contact stresses were developed differently depending on the constitutive behavior of rocks. Small contact stresses occurred in steel pipes installed in elasto-plastic rock compared to steel pipes installed in elastic rock. Also, the anchoring behaviors of the inflatable steel pipe rockbolt were different according to the stiffness of the rock. The steel pipe was completely unfolded in the case of the stiffness smaller than 0.5 GPa, but it was not fully unfolded in the case of the stiffness larger than 0.5 GPa for the given analysis condition. When the steel pipe is completely unfolded, the contact stress increases as the rock stiffness increases. However, the contact stress decreases as the rock stiffness increases when the steel pipe is not fully expanded.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.40-51
• /
• 1991

A Propeller design method using the newly developed blade section(KH18), which behaves better cavitation characteristics, is presented. Experimental results for two-dimensional foil sections show that the lift-drag curve and the cavitation-free bucket diagram of the new blade section are wider comparing to those of the existion NACA sections. This characteristic of the new section is particularly important for marine propeller applications since angle of attack variation of the propeller blade operating behind a non-uniform ship's wake is relatively large. A lifting surface theory is used for the design of a propeller with the developed section for a 2700 TEU container ship. Since the most suitable chordwise loading shape is not known a priori, chordwise loading shape is chosen as a design parameter. Five propellers with different chordwise loading shapes and different foil sections are designed and tested in the towing tank and cavitation tunnel at KRISO. It is observed by a series of extensive model tsets that the propeller(KP197) having the chordwise loading shape, which has less leading edge loading at the inner radii and more leading edge loading at the outer radii of 0.7 radius, has higher propulsive efficiency and better cavitation characteristics. The KP197 propeller shows 1% higher efficiency, 30% cavitation volume reduction and 9% reduction of fluctuating pressure level comparing to the propeller with an NACA section. More appreciable efficiency gain for the new blade section propeller would be expected by reduction of expanded blade area considering the better cavitation characteristics of the new blade section.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.99-108
• /
• 2011

Almost all companies have paid much attention to the safety management ranging from maintenance to operation even at the stage of designing in order to prevent accidents, but fatal accidents continue to increase throughout the world. In particular, it is essential to systematically prevent such fatal accidents as fire, explosion or leakage of toxic gas at factories in order to not only protect the workers and neighbors but also prevent economic losses and environmental pollution. Though it is well known that accident probability is very low in NPP(Nuclear Power Plants), the reason why many researches are still being performed about the accidents is the results may be so severe. HRA is the main process to make preparation for possibility of human error in designing of the NPP. But those techniques have some problems and limitation as follows; the evaluation sensitivity of those techniques are out of date. And the evaluation of human error is not coupled with the design process. Additionally, the scope of the human error which has to be included in reliability assessment should be expanded. This work focuses on the coincidence of human error and mechanical failure for some important performance shaping factors to propose a method for improving safety effectively of the process industries. In order to apply in these purposes into the thesis, I found 63 critical Performance Shaping Factors of the eight dimensions throughout studies that I executed earlier. In this study, various analysis of opinion of specialists(Personal Factors, Training, Knowledge or Experience, Procedures and Documentation, Information, Communications, HMI, Workplace Design, Quality of Environment, Team Factors) and the guideline for construction of PSF were accomplished. The selected method was AHP which simplifies objective conclusions by maintaining consistency. This research focused on the implementation process of PSF to evaluate the process of PSF at each phase. As a result, we propose an evaluation model of PSF as a tool to find critical problem at each phase and improve on how to resolve the problems found at each phase. This evaluation model makes it possible to extraction of PSF succesfully by presenting the basis of assessment which will be used by enterprises to minimize the trial and error of construction process of PSF.

• Journal of the Korea Society for Simulation
• /
• v.15 no.2
• /
• pp.31-39
• /
• 2006

The visibility graph is a well-known method for efficient path-finding with the minimum search space modelling the game world. The generalized visibility graph is constructed on the expanded obstacle boundaries to eliminate the "wall-hugging" problem which is a major disadvantage of using the visibility graph. The paths generated by the generalized visibility graph are guaranteed to be near optimal and natural-looking. In this paper we propose the method to apply the generalized visibility graph efficiently for game characters who moves among static obstacles between varying start and goal points. Even though the space is minimal once the generalized visibility graph is constructed, the construction itself is time-consuming in checking the intersection between every two links connecting nodes. The idea is that we build the map for static obstacles first and then incorporate start and goal nodes quickly. The incorporation of start and goal nodes is the part that must be executed repeatedly. Therefore we propose to use the rotational plane-sweep algorithm in the computational geometry for incorporating start and goal nodes efficiently. The simulation result shows that the execution time has been improved by 39%-68% according to running times in the game environment with multiple static obstacles.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.373-380
• /
• 2017

Operational errors caused by human factors, which is the major cause of marine accidents, include lack of knowledge, misunderstanding knowledge, and inadequate procedures. Recently, the type of propulsion mounted on KCG cutters has been diversified. In particular, the water jet propulsion unit, which was mainly installed in small boats, have been gradually expanded to medium and large size Coast Guard cutters, reaching 50% of the total. Axes types are divided into 2 to 4, and the bucket types are divided into Double Reverse Bucket(DRB) and Single Reverse Bucket(SRB); in these, the backward and steering control methods are completely different. Diversification of these operating systems can increase factors causing human error by the ships' operators. However, there is a lack of research on the maneuvering methods, considering the inherent active characteristics of each type of water jet. In this paper, we analyze the sideway method suitable for the condition of Coast Guard Exclusive wharf without assistance, based on the astern performance of each type. Then, a ship handling simulator was used for the experiment; they compared and verified through interviews of captains.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.268-274
• /
• 2011

BACKGROUND: A large scale of sediment load delivered from watershed causes substantial waterway damages and water quality degradation. Controlling sediment loading requires the knowledge of the soil erosion and sedimentation. The various factors such as watershed size, slope, climate, land use may affect sediment delivery processes. Traditionally sediment delivery ratio prediction equations have been developed by relating watershed characteristics to measured sediment yield divided by predicted gross erosion. However, sediment prediction equations have been developed for only a few regions because of limited sediment data. Besides, little research has been done on the prediction of sediment delivery ratio for asia monsoon period in mountainous watershed. METHODS AND RESULTS: In this study Tank model was expanded and applied for estimating sediment yield to Oship River of east coast. The rainfall-runoff in 2006 was verified using the Tank model and we derived good result between observed and calculated discharge in 2009 at the same conditions. In relation to sediment yield, the sediment delivery rate of 2006 was very high than 2009 regardless of methods for estimating sediment load. It was thought to be affected by heavy rainfall due to the typhoon. CONCLUSION(s): For estimating sediment volume from watershed, long-term monitoring data on discharge and sediment is needed. This model will be able to apply to predict discharge and sediment yield simultaneously in ungauged area. This approach is more effective and less expensive method than the traditional method which needs a lot of data collection.