• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.11
• /
• pp.2853-2865
• /
• 2000

During the curing process of thick glass/epoxy laminates, a substantial amount of temperature lag and overshoot at the center of the laminates is usually experienced due to the large thickness and low thermal conductivity of the glass/epoxy composites. Also, it takes a longer time for full and uniform consolidation. In this work, temperature, degree of cure and consolidation of a 20 mm thick unidirectional glass/epoxy laminate were investigated using an experiment and a 3-dimentional numerical analysis. From the experimental and numerical results, it was found that the experimentally obtained temperature profile agreed well with the numerical one, and the cure cycle recommended by the prepreg manufacturer should be modified to prevent a temperature overshoot and to obtain full consolidation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.12
• /
• pp.1669-1680
• /
• 1998

A method is developed to include the effect of volume expansion in the description of the flame dynamics using G-equation. Line volume-source is used to represent the effect of the exothermic process of combustion with source strength assigned by the density difference between the burned and the unburned region. The present model provides good agreement with the experimental results. Including volume expansion, the flow field is adjusted to accommodate the increased volume flow rate which crossing the flame front and the result predicts the same behavior of measured velocity field qualitatively. The effect of increasing volume expansion does not change the initial growth rate of flame area but increase the residence time. Consequently this effect increases the maximum area of flame front. The flame propagation in varying flow field due to volume expansion provides a promising way to represent the wrinkled turbulent premixed flames in a numerically efficient manner.

• Applied Microscopy
• /
• v.27 no.4
• /
• pp.473-481
• /
• 1997

Disorder-order transformation of nanocrystalline FeAl have been investigated by a combination of electron and X-ray diffraction analysis including high resolution electron microscopy and differential scanning calorimetry. Fe-50at.%Al powders mechanically alloyed for 90 hours consist of $5\sim10$ nm size grains haying either disordered b.c.c. structure or amorphous structure. X-ray and electron diffraction of mechanically alloyed FeAl powders show that disorder-order transformation occurs at the temperature range of $300^{\circ}C\sim320^{\circ}C$. Such a low-temperature ordering behavior exhibiting an exothermic reaction is attributable to the nm-scale grain structure with a large amount of defects accumulated during mechanical alloying process.

• Journal of the Korean Chemical Society
• /
• v.62 no.2
• /
• pp.79-86
• /
• 2018

This study reported the adsorption of Cu(II) ions onto activated carbon prepared from Myristica Fragrans shell (MFS AC) over independent variables of contact time, activating chemical (NaOH) concentration, initial adsorbate concentration, initial pH of adsorbate solution and adsorption temperature. The MFS AC structure, morphology and total surface area were characterized by FTIR, SEM and BET techniques, respectively. The Cu(II) ions adsorption on the MFS AC (activated using 0.5 M NaOH) fitted best to Freundlich adsorption isotherm (FAI), and the FAI constant obtained was 0.845 L/g at $30^{\circ}C$ and pH 4.5. It followed the pseudo first order of adsorption kinetic (PFOAK) model, and the PFOAK based adsorption capacity was 107.65 mg/g. Thermodynamic study confirmed the Cu(II) ions adsorption should be exothermic and non-spontaneous process, physical adsorption should be taken place. The total surface area and pore volume based on BET analysis was $99.85m^2/g$ and 0.086 cc/g, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.9
• /
• pp.1313-1318
• /
• 2003

A series of complexes of bivalent transition metal ions with acetyl benzal dehydehydrazone and its derivatives of general formula ML have been prepared and characterized with the help of conductometric, photometric and infrared studies. The stability constants and related thermodynamic functions of complexes were determined using the potentiometric technique at different temperatures. The formation of complexes is exothermic process with covalency nature. The electrical conductivity of some solid complexes was measured in the temperature range 289-353 K. The results revealed semiconducting properties for the studied complexes.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.8
• /
• pp.823-827
• /
• 2000

Gas-Phase reactions of methyl and ethyl nitrites with anionic nucleophiles of SH-, F- and OH- are investigated theoretically at the MP2/6-311+G* level. The SN2 processes are all highly exothermic and proceed with a typ-icaI double-weIl reaction coordinate profile. The elimination reactions of methyl nitrite with SH- and F- are double-well energy surface processes,with stabilizedproduct complexes of NO-...H2S and NO-...HF, pro-ceeding by an E1 cb-like E2 mechanism. The $\beta-elimination$ of ethyl nitrite is an E2 type process. The $\alpha-elimi-nation$ reactions of methyl and ethyl nitrites with OH- have triple-well energy profiles of Elcb pathway with an $\alpha-carbanion$ intermediate which is stabilized bythe vicinal $nc\alpha-{\sigma}*o-N$ charge transfer interactions. CompIex-ation ofmethyl carbanion with HF seems to provide a stable intermediate within a triple-well energy profile of El cb channel in the reaction of F- with methyl nitrite.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.6
• /
• pp.444-449
• /
• 1987

Solvent effects on gas phase reactions of methoxide ion with substituted ethylenes, $CH_2$ = CHR where R = CN, CHO and $NO_2$, are investigated theoretically using the AM1 method. Results show that the methoxide approaches in-plane in all reactions, but subsequently rotate out-of-plane to form tetrahedral complexes in additon reactions. All reactions of a bare methoxide are found to be exothermic, the exothermicity being the greatest in the ${\beta}$-addition, in which the excess energy is forced to be contained within the ${\beta}$-adduct rendering extreme instability. However a part of the excess energy can be removed by a solvate molecule giving a stable complex prior to the product formation. The hydride transfer processes were found to be unfavorable due to the high activation barriers. The ${\alpha}-H^+$ abstraction process from acrylonitrile becomes endothermic as a result of monosolvation of the methoxide, in agreement with experimental results.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.557-561
• /
• 2000

Various enaryloxynitriles-terminated reactive polymer precursors containing rigid aromatic units were prepared from various diamines and 1-(p-formylphenyl)-1-phenyl-2,2-dicyanoethene (1). Arylate end-capped model compounds linked with azomethine bond were also prepared by reacting p-formylphenyl benzoate with diamines to compare the curing ability. The oligomers were highly soluble in polar aprotic solvents such as N,N-dimethylformamide, dimethylsulfoxide and N-methyl-2 -pyrrolidinone. They generally showed an exothermic curing process between $280-350^{\circ}C$, attributable to the thermal crosslinking of the dicyanovinyl group in DSC analysis, and no weight loss at curing temperature. Upon heating the polymer precursors, heat-resistant and insoluble network polymers were obtained. Thermogravimetric analyses of the precursors containing rigid aromatic units showed thermal stability with a 77-92% residual weight at $500^{\circ}C$ under nitrogen.

• Nuclear Engineering and Technology
• /
• v.49 no.3
• /
• pp.534-540
• /
• 2017

The adsorption of uranium (VI) by calcium alginate beads was examined by batch experiments. The effects of environmental conditions on U (VI) adsorption were studied, including contact time, pH, initial concentration of U (VI), and temperature. The alginate beads were characterized by using scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. Fourier transform infrared spectra indicated that hydroxyl and alkoxy groups are present at the surface of the beads. The experimental results showed that the adsorption of U (VI) by alginate beads was strongly dependent on pH, the adsorption increased at pH 3~7, then decreased at pH 7~9. The adsorption reached equilibrium within 2 minutes. The adsorption kinetics of U (VI) onto alginate beads can be described by a pseudo first-order kinetic model. The adsorption isotherm can be described by the Redlich-Peterson model, and the maximum adsorption capacity was 237.15 mg/g. The sorption process is spontaneous and has an exothermic reaction.

• Nuclear Engineering and Technology
• /
• v.50 no.7
• /
• pp.1112-1119
• /
• 2018

Dicalcium phosphate nanoparticles (DCP-NPs) was synthesized chemically and used for adsorptive removal of uranyl ions from aqueous solutions in a batch system. A commercial grade of DCP (monetite) was also employed for comparison. The synthesized and commercial adsorbents (S-DCP and C-DCP) were characterized by FT-IR, SEM and XRD techniques. The investigation of adsorption isotherms indicated that the maximum adsorption capacities ($q_m$) for C-DCP and S-DCP were 714.3 and $666.7mg\;g^{-1}$ (at 293 K), respectively. The experimental kinetics were well-described by the pseudo-second-order kinetic and the equilibrium data were fitted with both Langmuir and Freundlich adsorption models. Thermodynamic studies indicated that the adsorption of uranyl ions on the monetite surface was a spontaneous exothermic process. The exhausted adsorbents could be regenerated by washing with $0.10mol\;L^{-1}$ NaOH.